summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAmaury Pouly <amaury.pouly@gmail.com>2013-11-26 15:55:14 +0000
committerAmaury Pouly <amaury.pouly@gmail.com>2013-11-26 15:57:13 +0000
commitcbed7ecafed52f41a06fdd1315e06f5601063606 (patch)
tree5ea15b05c46dd59b9f6788e3cd93413fc2683065
parentf04d3c518a3c26def9a003a108bec254499c7c90 (diff)
downloadrockbox-cbed7ec.tar.gz
rockbox-cbed7ec.zip
zen: rework lcd enable
The ZEN/ZEN-XFi seem to be very picky about the lcd. And they do not like standby mode so I'm going to drop it, the OF doesn't use it anyway. I still don't know what this "power" pin is about, obviously it's not real power but the OF toggle it. Let's hope the lcd will finally become more stable with fix: the driver now does full power on/off on enable/disable. Change-Id: I1c465ee4f2462bc3d9507e5f575f0a181af60214
-rw-r--r--firmware/target/arm/imx233/creative-zen/lcd-zen.c140
1 files changed, 67 insertions, 73 deletions
diff --git a/firmware/target/arm/imx233/creative-zen/lcd-zen.c b/firmware/target/arm/imx233/creative-zen/lcd-zen.c
index d1d690a974..7e9e98271c 100644
--- a/firmware/target/arm/imx233/creative-zen/lcd-zen.c
+++ b/firmware/target/arm/imx233/creative-zen/lcd-zen.c
@@ -36,9 +36,7 @@
#include "action.h"
#endif
-#ifdef HAVE_LCD_ENABLE
static bool lcd_on;
-#endif
/**
* DMA
@@ -71,7 +69,7 @@ static void wait_frames_cb(void)
static void wait_nr_frames(int nr)
{
- g_wait_nr_frame = 1 + nr; // +1 because we want entire frames
+ g_wait_nr_frame = 2 + nr; // +1 because we want entire frames, +1 to be safe
imx233_lcdif_set_vsync_edge_cb(wait_frames_cb);
imx233_lcdif_enable_vsync_edge_irq(true);
semaphore_wait(&g_wait_sema, TIMEOUT_BLOCK);
@@ -90,20 +88,15 @@ static void wait_nr_frames(int nr)
#define RS 0x2
#define RW 0x1
-static void spi_init(void)
+static void spi_enable(bool en)
{
- imx233_pinctrl_acquire(1, 9, "lcd_spi_sdo");
- imx233_pinctrl_acquire(1, 10, "lcd_spi_scl");
- imx233_pinctrl_acquire(1, 11, "lcd_spi_cs");
- imx233_pinctrl_set_function(1, 9, PINCTRL_FUNCTION_GPIO);
- imx233_pinctrl_set_function(1, 10, PINCTRL_FUNCTION_GPIO);
- imx233_pinctrl_set_function(1, 11, PINCTRL_FUNCTION_GPIO);
- imx233_pinctrl_set_gpio(1, 9, true);
- imx233_pinctrl_set_gpio(1, 10, true);
- imx233_pinctrl_set_gpio(1, 11, true);
- imx233_pinctrl_enable_gpio(1, 9, true);
- imx233_pinctrl_enable_gpio(1, 10, true);
- imx233_pinctrl_enable_gpio(1, 11, true);
+ imx233_pinctrl_set_gpio(1, 9, en);
+ imx233_pinctrl_set_gpio(1, 10, en);
+ imx233_pinctrl_set_gpio(1, 11, en);
+ imx233_pinctrl_enable_gpio(1, 9, en);
+ imx233_pinctrl_enable_gpio(1, 10, en);
+ imx233_pinctrl_enable_gpio(1, 11, en);
+ mdelay(1);
}
static void spi_delay(void)
@@ -216,7 +209,6 @@ static void lcd_display_on_seq(void)
spi_write_reg(0x7, 0x103);
}
-#ifdef HAVE_LCD_ENABLE
static void lcd_display_off_seq(void)
{
spi_write_reg(0xb, 0x30e1);
@@ -227,30 +219,69 @@ static void lcd_display_off_seq(void)
spi_write_reg(0x10, 0x100);
}
-static void lcd_standby_in_seq(void)
+/**
+ * Rockbox
+ */
+
+bool lcd_active(void)
{
- lcd_display_off_seq();
- spi_write_reg(0x10, 0x1);
+ return lcd_on;
}
-static void lcd_standby_out_seq(void)
+void lcd_enable(bool enable)
{
- spi_write_reg(0x10, 0);
- lcd_power_seq();
- lcd_display_on_seq();
-}
-#endif
+ if(lcd_on == enable)
+ return;
-/**
- * Rockbox
- */
+ lcd_on = enable;
+ if(lcd_on)
+ {
+ // enable spi
+ spi_enable(true);
+ // reset
+ imx233_lcdif_reset_lcd(true);
+ imx233_lcdif_reset_lcd(false);
+ mdelay(1);
+ imx233_lcdif_reset_lcd(true);
+ mdelay(1);
+ // "power" on
+ lcd_power(true);
+ // setup registers
+ imx233_lcdif_enable_sync_signals(true); // we need frame signals during init
+ lcd_power_seq();
+ lcd_init_seq();
+ lcd_display_on_seq();
+
+ imx233_dma_reset_channel(APB_LCDIF);
+ imx233_dma_start_command(APB_LCDIF, &lcdif_dma[0].dma);
+ BF_SET(LCDIF_CTRL, DOTCLK_MODE);
+ BF_SET(LCDIF_CTRL, RUN);
+ }
+ else
+ {
+ // power down
+ lcd_display_off_seq();
+ lcd_power(false);
+ // stop lcdif
+ BF_CLR(LCDIF_CTRL, DOTCLK_MODE);
+ // disable spi
+ spi_enable(false);
+ }
+}
void lcd_init_device(void)
{
semaphore_init(&g_wait_sema, 1, 0);
-#ifdef HAVE_LCD_ENABLE
- lcd_on = true;
-#endif
+ /* I'm not really sure this pin is related to power, it does not seem to do anything */
+ imx233_pinctrl_acquire(1, 8, "lcd_power");
+ imx233_pinctrl_acquire(1, 9, "lcd_spi_sdo");
+ imx233_pinctrl_acquire(1, 10, "lcd_spi_scl");
+ imx233_pinctrl_acquire(1, 11, "lcd_spi_cs");
+ imx233_pinctrl_set_function(1, 9, PINCTRL_FUNCTION_GPIO);
+ imx233_pinctrl_set_function(1, 10, PINCTRL_FUNCTION_GPIO);
+ imx233_pinctrl_set_function(1, 11, PINCTRL_FUNCTION_GPIO);
+ imx233_pinctrl_set_function(1, 8, PINCTRL_FUNCTION_GPIO);
+ imx233_pinctrl_enable_gpio(1, 8, true);
/** lcd is 320x240, data bus is 8-bit, depth is 24-bit so we need 3clk/pix
* by running PIX clock at 24MHz we can sustain ~100 fps */
imx233_clkctrl_enable(CLK_PIX, false);
@@ -275,26 +306,7 @@ void lcd_init_device(void)
/*h_front_porch*/4, LCD_WIDTH, LCD_HEIGHT, /*clk_per_pix*/3,
/*enable_present*/false);
imx233_lcdif_set_byte_packing_format(0xf);
- // prepare pins
- spi_init();
- imx233_pinctrl_acquire(1, 8, "lcd_power");
- imx233_pinctrl_set_function(1, 8, PINCTRL_FUNCTION_GPIO);
- imx233_pinctrl_enable_gpio(1, 8, true);
- // reset lcd
- imx233_lcdif_reset_lcd(true);
- mdelay(10);
- imx233_lcdif_reset_lcd(false);
- mdelay(10);
- imx233_lcdif_reset_lcd(true);
- mdelay(10);
- // power up
- lcd_power(true);
- // setup registers
- imx233_lcdif_enable_sync_signals(true); // we need frame signals during init
- lcd_power_seq();
- lcd_init_seq();
- lcd_display_on_seq();
- // setup refresh
+ // setup dma
unsigned size = IMX233_FRAMEBUFFER_SIZE;
uint8_t *frame_p = FRAME;
for(int i = 0; i < NR_CMDS; i++)
@@ -307,29 +319,10 @@ void lcd_init_device(void)
size -= xfer;
frame_p += xfer;
}
- imx233_dma_start_command(APB_LCDIF, &lcdif_dma[0].dma);
- BF_SET(LCDIF_CTRL, RUN);
+ // enable
+ lcd_enable(true);
}
-#ifdef HAVE_LCD_ENABLE
-bool lcd_active(void)
-{
- return lcd_on;
-}
-
-void lcd_enable(bool enable)
-{
- if(lcd_on == enable)
- return;
-
- lcd_on = enable;
- if(lcd_on)
- lcd_standby_out_seq();
- else
- lcd_standby_in_seq();
-}
-#endif
-
void lcd_update(void)
{
lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
@@ -353,3 +346,4 @@ void lcd_update_rect(int x, int y, int w, int h)
}
}
}
+