summaryrefslogtreecommitdiffstats
path: root/bootloader
diff options
context:
space:
mode:
authorBarry Wardell <rockbox@barrywardell.net>2006-12-19 11:33:53 +0000
committerBarry Wardell <rockbox@barrywardell.net>2006-12-19 11:33:53 +0000
commit2f16d4f1b3e52f0a268fa9679a72694f5a89dedf (patch)
tree332b7b5390bcd95fea7b291ca840e709c7aa1f83 /bootloader
parent6f4f58916417bdd11f2faf8339a0e94a039ca7a8 (diff)
downloadrockbox-2f16d4f1b3e52f0a268fa9679a72694f5a89dedf.tar.gz
rockbox-2f16d4f1b3e52f0a268fa9679a72694f5a89dedf.tar.bz2
rockbox-2f16d4f1b3e52f0a268fa9679a72694f5a89dedf.zip
Add working dual-boot bootloaders for H10 and Sansa, which allow booting the OF and Rockbox. Rolo also works.
Changes made: Combine bootloader/h10.c and bootloader/e200.c into a common bootloader file (bootloader/main-pp.c) to be used by all mi4 based PortalPlayer targets. The file bootloader/main-pp.c is based off the old bootloader/h10.c with some minor changes to allow it to work on the Sansa too. This effectively adds a Sansa bootloader. Define MODEL_NAME string in config-*.h for use in bootloader. Split crt0-pp.S into separate files for bootloader and normal builds. Bootloader code is now in crt0-pp-bl.S while normal build code stays in crt0-pp.S. Improvements to crt0-pp.S and crt0-pp-bl.S (mostly to make it more multiprocessor safe): * Leave space in bootloader at 0xe0-0xeb since scramble writes over there when it creates the mi4 file (don't leave space for iPods since it's not needed and all code in crt0-pp-bl.S needs to fit before the boot_table at 0x100). * Remove unused DEBUG and STUB code from crt0-pp.S. * Make CPU wait for COP to be sleeping when we put the COP to sleep. * Invalidate COP cache when COP wakes * Flush CPU cache before waking COP * Make sure only the CPU clears the BSS (not the COP) * Make sure only the CPU sets up its own stack (not the COP) Rolo works on H10, so enable it. Make Sansa e200 use rockbox.e200 rather than PP5022.mi4 for 'Normal' builds. This makes updating rockbox simpler as we don't need to go through the firmware update procedure, but rather just put a new rockbox.e200 on the device. rockbox.e200 uses a simple 'add' checksum. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11815 a1c6a512-1295-4272-9138-f99709370657
Diffstat (limited to 'bootloader')
-rw-r--r--bootloader/SOURCES6
-rw-r--r--bootloader/e200.c190
-rw-r--r--bootloader/main-pp.c (renamed from bootloader/h10.c)26
3 files changed, 16 insertions, 206 deletions
diff --git a/bootloader/SOURCES b/bootloader/SOURCES
index 94f5a60e6b..b86365b429 100644
--- a/bootloader/SOURCES
+++ b/bootloader/SOURCES
@@ -2,10 +2,8 @@
ipod.c
#elif defined(GIGABEAT_F)
gigabeat.c
-#elif defined(SANSA_E200)
-e200.c
-#elif defined(IRIVER_H10) || defined(IRIVER_H10_5GB)
-h10.c
+#elif defined(IRIVER_H10) || defined(IRIVER_H10_5GB) || defined(SANSA_E200)
+main-pp.c
#elif defined(ELIO_TPJ1022)
tpj1022.c
#else
diff --git a/bootloader/e200.c b/bootloader/e200.c
deleted file mode 100644
index 27b1118a1c..0000000000
--- a/bootloader/e200.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/***************************************************************************
- * __________ __ ___.
- * Open \______ \ ____ ____ | | _\_ |__ _______ ___
- * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
- * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
- * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
- * \/ \/ \/ \/ \/
- * $Id$
- *
- * Copyright (C) 2006 Daniel Stenberg
- *
- * All files in this archive are subject to the GNU General Public License.
- * See the file COPYING in the source tree root for full license agreement.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-#include "config.h"
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include "cpu.h"
-#include "system.h"
-#include "lcd.h"
-#include "kernel.h"
-#include "thread.h"
-#include "ata.h"
-#include "fat.h"
-#include "disk.h"
-#include "font.h"
-#include "adc.h"
-#include "backlight.h"
-#include "panic.h"
-#include "power.h"
-#include "file.h"
-
-static inline void blink(void)
-{
- volatile unsigned int* ptr;
- int i;
- ptr = (volatile unsigned int*)0x70000020;
-
- *ptr &= ~(1 << 13);
- for(i = 0; i < 0xfffff; i++)
- {
- }
- *ptr |= (1 << 13);
- for(i = 0; i < 0xfffff; i++)
- {
- }
-}
-
-static inline void slow_blink(void)
-{
- volatile unsigned int* ptr;
- int i;
- ptr = (volatile unsigned int*)0x70000020;
-
- *ptr &= ~(1 << 13);
- for(i = 0; i < (0xfffff); i++)
- {
- }
- for(i = 0; i < (0xfffff); i++)
- {
- }
- for(i = 0; i < (0xfffff); i++)
- {
- }
-
- *ptr |= (1 << 13);
- for(i = 0; i < (0xfffff); i++)
- {
- }
- for(i = 0; i < (0xfffff); i++)
- {
- }
- for(i = 0; i < (0xfffff); i++)
- {
- }
-}
-
-static inline unsigned long get_pc(void)
-{
- unsigned long pc;
- asm volatile (
- "mov %0, pc\n"
- : "=r"(pc)
- );
- return pc;
-}
-
-/* These functions are present in the firmware library, but we reimplement
- them here because the originals do a lot more than we want */
-
-void reset_poweroff_timer(void)
-{
-}
-
-int dbg_ports(void)
-{
- unsigned int gpio_a, gpio_b, gpio_c, gpio_d;
- unsigned int gpio_e, gpio_f, gpio_g, gpio_h;
- unsigned int gpio_i, gpio_j, gpio_k, gpio_l;
-
- char buf[128];
- int line;
-
- lcd_setmargins(0, 0);
- lcd_clear_display();
- lcd_setfont(FONT_SYSFIXED);
-
- while(1)
- {
- gpio_a = GPIOA_INPUT_VAL;
- gpio_b = GPIOB_INPUT_VAL;
- gpio_c = GPIOC_INPUT_VAL;
-
- gpio_g = GPIOG_INPUT_VAL;
- gpio_h = GPIOH_INPUT_VAL;
- gpio_i = GPIOI_INPUT_VAL;
-
- line = 0;
- snprintf(buf, sizeof(buf), "GPIO_A: %02x GPIO_G: %02x", gpio_a, gpio_g);
- lcd_puts(0, line++, buf);
- snprintf(buf, sizeof(buf), "GPIO_B: %02x GPIO_H: %02x", gpio_b, gpio_h);
- lcd_puts(0, line++, buf);
- snprintf(buf, sizeof(buf), "GPIO_C: %02x GPIO_I: %02x", gpio_c, gpio_i);
- lcd_puts(0, line++, buf);
- line++;
-
- gpio_d = GPIOD_INPUT_VAL;
- gpio_e = GPIOE_INPUT_VAL;
- gpio_f = GPIOF_INPUT_VAL;
-
- gpio_j = GPIOJ_INPUT_VAL;
- gpio_k = GPIOK_INPUT_VAL;
- gpio_l = GPIOL_INPUT_VAL;
-
- snprintf(buf, sizeof(buf), "GPIO_D: %02x GPIO_J: %02x", gpio_d, gpio_j);
- lcd_puts(0, line++, buf);
- snprintf(buf, sizeof(buf), "GPIO_E: %02x GPIO_K: %02x", gpio_e, gpio_k);
- lcd_puts(0, line++, buf);
- snprintf(buf, sizeof(buf), "GPIO_F: %02x GPIO_L: %02x", gpio_f, gpio_l);
- lcd_puts(0, line++, buf);
- line++;
- snprintf(buf, sizeof(buf), "ADC_1: %02x", adc_read(ADC_0));
- lcd_puts(0, line++, buf);
- snprintf(buf, sizeof(buf), "ADC_2: %02x", adc_read(ADC_1));
- lcd_puts(0, line++, buf);
- snprintf(buf, sizeof(buf), "ADC_3: %02x", adc_read(ADC_2));
- lcd_puts(0, line++, buf);
- snprintf(buf, sizeof(buf), "ADC_4: %02x", adc_read(ADC_3));
- lcd_puts(0, line++, buf);
- lcd_update();
- }
- return 0;
-}
-
-void mpeg_stop(void)
-{
-}
-
-void usb_acknowledge(void)
-{
-}
-
-void usb_wait_for_disconnect(void)
-{
-}
-
-void sys_poweroff(void)
-{
-}
-
-void system_reboot(void)
-{
-
-}
-
-void main(void)
-{
- kernel_init();
- adc_init();
- lcd_init_device();
-
- dbg_ports();
-}
-
diff --git a/bootloader/h10.c b/bootloader/main-pp.c
index 0cfd64a96e..a533cc7044 100644
--- a/bootloader/h10.c
+++ b/bootloader/main-pp.c
@@ -40,8 +40,8 @@
#include "power.h"
#include "file.h"
-/* Size of the buffer to store the loaded Rockbox/iriver image */
-#define MAX_LOADSIZE (5*1024*1024)
+/* Size of the buffer to store the loaded firmware image */
+#define MAX_LOADSIZE (10*1024*1024)
/* A buffer to load the iriver firmware or Rockbox into */
unsigned char loadbuffer[MAX_LOADSIZE];
@@ -52,18 +52,18 @@ char version[] = APPSVERSION;
int line=0;
-/* Load original iriver firmware. This function expects a file called
- "/System/Original.mi4" on the player. It should be decrypted
- and have the header stripped using mi4code. It reads the file in to a memory
+/* Load original mi4 firmware. This function expects a file called
+ "/System/OF.bin" on the player. It should be a mi4 firmware decrypted
+ and header stripped using mi4code. It reads the file in to a memory
buffer called buf. The rest of the loading is done in main() and crt0.S
*/
-int load_iriver(unsigned char* buf)
+int load_original_firmware(unsigned char* buf)
{
int fd;
int rc;
int len;
- fd = open("/System/Original.mi4", O_RDONLY);
+ fd = open("/System/OF.bin", O_RDONLY);
len = filesize(fd);
@@ -78,7 +78,7 @@ int load_iriver(unsigned char* buf)
return len;
}
-/* Load Rockbox firmware (rockbox.h10) */
+/* Load Rockbox firmware (rockbox.*) */
int load_rockbox(unsigned char* buf)
{
int fd;
@@ -164,6 +164,7 @@ void* main(void)
kernel_init();
lcd_init();
font_init();
+ button_init();
line=0;
@@ -172,7 +173,7 @@ void* main(void)
lcd_puts(0, line++, "Rockbox boot loader");
snprintf(buf, sizeof(buf), "Version: 20%s", version);
lcd_puts(0, line++, buf);
- snprintf(buf, sizeof(buf), "iriver H10");
+ snprintf(buf, sizeof(buf), MODEL_NAME);
lcd_puts(0, line++, buf);
lcd_update();
@@ -212,11 +213,11 @@ void* main(void)
i=button_read_device();
if(i==BUTTON_LEFT)
{
- lcd_puts(0, line, "Loading iriver firmware...");
+ lcd_puts(0, line++, "Loading original firmware...");
lcd_update();
- rc=load_iriver(loadbuffer);
+ rc=load_original_firmware(loadbuffer);
} else {
- lcd_puts(0, line, "Loading Rockbox...");
+ lcd_puts(0, line++, "Loading Rockbox...");
lcd_update();
rc=load_rockbox(loadbuffer);
}
@@ -225,6 +226,7 @@ void* main(void)
snprintf(buf, sizeof(buf), "Rockbox error: %d",rc);
lcd_puts(0, line++, buf);
lcd_update();
+ while(1) {}
}
memcpy((void*)DRAM_START,loadbuffer,rc);