summaryrefslogtreecommitdiffstats
path: root/firmware/export
diff options
context:
space:
mode:
authorDave Chapman <dave@dchapman.com>2008-10-12 16:46:01 +0000
committerDave Chapman <dave@dchapman.com>2008-10-12 16:46:01 +0000
commitda8bff107e8ed6bf63cc005bfa6c90b12c8b4dd5 (patch)
tree13c81d9578d8ba3cda2d7c9d20e2a67ac8bee0d3 /firmware/export
parent0f933f62101a8fe8bb841617217f7e866324820d (diff)
downloadrockbox-da8bff107e8ed6bf63cc005bfa6c90b12c8b4dd5.tar.gz
rockbox-da8bff107e8ed6bf63cc005bfa6c90b12c8b4dd5.zip
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18782 a1c6a512-1295-4272-9138-f99709370657
Diffstat (limited to 'firmware/export')
-rw-r--r--firmware/export/as3525.h315
-rw-r--r--firmware/export/config-clip.h176
-rw-r--r--firmware/export/config.h7
-rw-r--r--firmware/export/cpu.h3
-rw-r--r--firmware/export/timer.h2
5 files changed, 501 insertions, 2 deletions
diff --git a/firmware/export/as3525.h b/firmware/export/as3525.h
new file mode 100644
index 0000000000..237656d14f
--- /dev/null
+++ b/firmware/export/as3525.h
@@ -0,0 +1,315 @@
+/*
+* (C) Copyright 2006
+* Copyright (C) 2006 Austriamicrosystems, by thomas.luo
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+#ifndef __AS3525_H__
+#define __AS3525_H__
+
+#define UART_CHANNELS 1
+
+/* AS352X only supports 512 Byte HW ECC */
+#define ECCSIZE 512
+#define ECCBYTES 3
+
+
+/* AS352X device base addresses */
+
+
+/*
+------------------------------------------------------------------------
+* AS352X Registers
+*
+------------------------------------------------------------------------
+*
+*/
+
+
+/* AHB */
+#define USB_BASE 0xC6000000
+#define VIC_BASE 0xC6010000
+#define DMAC_BASE 0xC6020000
+#define MPMC_BASE 0xC6030000
+#define MEMSTICK_BASE 0xC6040000
+#define CF_IDE_BASE 0xC6050000
+
+/* APB */
+#define NAND_FLASH_BASE 0xC8000000
+#define BIST_MANAGER_BASE 0xC8010000
+#define SD_MCI_BASE 0xC8020000
+#define TIMER_BASE 0xC8040000
+#define WDT_BASE 0xC8050000
+#define I2C_MS_BASE 0xC8060000
+#define I2C_AUDIO_BASE 0xC8070000
+#define SSP_BASE 0xC8080000
+#define I2SIN_BASE 0xC8090000
+#define I2SOUT_BASE 0xC80A0000
+#define GPIOA_BASE 0xC80B0000
+#define GPIOB_BASE 0xC80C0000
+#define GPIOC_BASE 0xC80D0000
+#define GPIOD_BASE 0xC80E0000
+#define CGU_BASE 0xC80F0000
+#define CCU_BASE 0xC8100000
+#define UART0_BASE 0xC8110000
+#define DBOP_BASE 0xC8120000
+
+
+
+
+
+
+
+
+/*
+------------------------------------------------------------------------
+* AS352X control registers
+*
+------------------------------------------------------------------------
+*/
+
+#define CCU_SRC (*(volatile unsigned long *)(CCU_BASE + 0x00))
+#define CCU_SRL (*(volatile unsigned long *)(CCU_BASE + 0x04))
+#define CCU_MEMMAP (*(volatile unsigned long *)(CCU_BASE + 0x08))
+#define CCU_IO (*(volatile unsigned long *)(CCU_BASE + 0x0C))
+#define CCU_SCON (*(volatile unsigned long *)(CCU_BASE + 0x10))
+#define CCU_VERS (*(volatile unsigned long *)(CCU_BASE + 0x14))
+#define CCU_SPARE1 (*(volatile unsigned long *)(CCU_BASE + 0x18))
+#define CCU_SPARE2 (*(volatile unsigned long *)(CCU_BASE + 0x1C))
+
+/* DBOP */
+#define DBOP_TIMPOL_01 (*(volatile unsigned long *)(DBOP_BASE + 0x00))
+#define DBOP_TIMPOL_23 (*(volatile unsigned long *)(DBOP_BASE + 0x04))
+#define DBOP_CTRL (*(volatile unsigned long *)(DBOP_BASE + 0x08))
+#define DBOP_STAT (*(volatile unsigned long *)(DBOP_BASE + 0x0C))
+#define DBOP_DOUT (*(volatile unsigned short*)(DBOP_BASE + 0x10))
+#define DBOP_DIN (*(volatile unsigned long *)(DBOP_BASE + 0x14))
+
+
+/**
+* Reset Control Lines in CCU_SRC register
+**/
+#define CCU_SRC_DBOP_EN ( 1 << 24 )
+#define CCU_SRC_SPDIF_EN ( 1 << 22 )
+#define CCU_SRC_TIMER_EN ( 1 << 21 )
+#define CCU_SRC_SSP_EN ( 1 << 20 )
+#define CCU_SRC_WDO_EN ( 1 << 19 )
+#define CCU_SRC_IDE_EN ( 1 << 18 )
+#define CCU_SRC_IDE_AHB_EN ( 1 << 17 )
+#define CCU_SRC_UART0 ( 1 << 16 )
+#define CCU_SRC_NAF_EN ( 1 << 15 )
+#define CCU_SRC_SDMCI_EN ( 1 << 14 )
+#define CCU_SRC_GPIO_EN ( 1 << 13 )
+#define CCU_SRC_I2C_AUDIO_EN ( 1 << 12 )
+#define CCU_SRC_I2C_EN ( 1 << 11 )
+#define CCU_SRC_MST_EN ( 1 << 10 )
+#define CCU_SRC_I2SIN ( 1 << 9 )
+#define CCU_SRC_I2SOUT ( 1 << 8 )
+#define CCU_SRC_USB_AHB_EN ( 1 << 7 )
+#define CCU_SRC_USB_PHY_EN ( 1 << 6 )
+#define CCU_SRC_DMAC_EN ( 1 << 5 )
+#define CCU_SRC_VIC_EN ( 1 << 4 )
+
+/**
+* Magic number for CCU_SRL for reset.
+**/
+#define CCU_SRL_MAGIC_NUMBER 0x1A720212
+
+/**
+* Chip select lines for NAF. Use these constants to select/deselct the
+CE lines
+* for NAND flashes in Register CCU_IO.
+**/
+#define CCU_IO_NAF_CE_LINE_0 ( 0 << 7 )
+#define CCU_IO_NAF_CE_LINE_1 ( 1 << 7 )
+#define CCU_IO_NAF_CE_LINE_2 ( 2 << 7 )
+#define CCU_IO_NAF_CE_LINE_3 ( 3 << 7 )
+
+/* CCU IO Select/Deselect IDE */
+#define CCU_IO_IDE ( 1 << 5 )
+
+/* CCU IO Select/desect I2C */
+#define CCU_IO_I2C_MASTER_SLAVE ( 1 << 1 )
+
+/* CCU IO Select/desect UART */
+#define CCU_IO_UART0 ( 1 << 0 )
+
+
+#define CCU_RESET_ALL_BUT_MEMORY \
+ ( CCU_SRC_DBOP_EN \
+ | CCU_SRC_SPDIF_EN \
+ | CCU_SRC_TIMER_EN \
+ | CCU_SRC_SSP_EN \
+ | CCU_SRC_WDO_EN \
+ | CCU_SRC_IDE_EN \
+ | CCU_SRC_IDE_AHB_EN \
+ | CCU_SRC_UART0 \
+ | CCU_SRC_NAF_EN \
+ | CCU_SRC_SDMCI_EN \
+ | CCU_SRC_GPIO_EN \
+ | CCU_SRC_I2C_AUDIO_EN \
+ | CCU_SRC_I2C_EN \
+ | CCU_SRC_MST_EN \
+ | CCU_SRC_I2SIN \
+ | CCU_SRC_I2SOUT \
+ | CCU_SRC_USB_AHB_EN \
+ | CCU_SRC_USB_PHY_EN \
+ | CCU_SRC_DMAC_EN \
+ | CCU_SRC_VIC_EN \
+ )
+
+#define CCU_IO_UART ( 1 << 0 )
+/*
+------------------------------------------------------------------------
+* AS352X clock control registers
+*
+------------------------------------------------------------------------
+*/
+
+#define CGU_PLLA (*(volatile unsigned long *)(CGU_BASE + 0x00))
+#define CGU_PLLB (*(volatile unsigned long *)(CGU_BASE + 0x04))
+#define CGU_PLLASUP (*(volatile unsigned long *)(CGU_BASE + 0x08))
+#define CGU_PLLBSUP (*(volatile unsigned long *)(CGU_BASE + 0x0C))
+#define CGU_PROC (*(volatile unsigned long *)(CGU_BASE + 0x10))
+#define CGU_PERI (*(volatile unsigned long *)(CGU_BASE + 0x14))
+#define CGU_AUDIO (*(volatile unsigned long *)(CGU_BASE + 0x18))
+#define CGU_USB (*(volatile unsigned long *)(CGU_BASE + 0x1C))
+#define CGU_INTCTRL (*(volatile unsigned long *)(CGU_BASE + 0x20))
+#define CGU_IRQ (*(volatile unsigned long *)(CGU_BASE + 0x24))
+#define CGU_COUNTA (*(volatile unsigned long *)(CGU_BASE + 0x28))
+#define CGU_COUNTB (*(volatile unsigned long *)(CGU_BASE + 0x2C))
+#define CGU_IDE (*(volatile unsigned long *)(CGU_BASE + 0x30))
+#define CGU_MEMSTICK (*(volatile unsigned long *)(CGU_BASE + 0x34))
+#define CGU_DBOP (*(volatile unsigned long *)(CGU_BASE + 0x38))
+
+
+/* --- are disabled after reset --- */
+#define CGU_DMA_CLOCK_ENABLE ( 1 << 22 ) /* dma */
+#define CGU_USB_CLOCK_ENABLE ( 1 << 21 ) /* usb */
+#define CGU_I2SOUT_APB_CLOCK_ENABLE ( 1 << 20 ) /* i2sout */
+#define CGU_I2SIN_APB_CLOCK_ENABLE ( 1 << 19 ) /* i2sin */
+#define CGU_I2C_MASTER_SLAVE_CLOCK_ENABLE ( 1 << 18 ) /* i2c master/slave */
+#define CGU_I2C_AUDIO_MASTER_CLOCK_ENABLE ( 1 << 17 ) /* i2c audio master */
+#define CGU_GPIO_CLOCK_ENABLE ( 1 << 16 ) /* gpio */
+#define CGU_MCI_CLOCK_ENABLE ( 1 << 15 ) /* mmc + sd */
+#define CGU_NAF_CLOCK_ENABLE ( 1 << 14 ) /* naf */
+#define CGU_UART_APB_CLOCK_ENABLE ( 1 << 13 ) /* uart */
+#define CGU_WDOCNT_CLOCK_ENABLE ( 1 << 12 ) /* watchdog counter */
+#define CGU_WDOIF_CLOCK_ENABLE ( 1 << 11 ) /* watchdog timer module */
+#define CGU_SSP_CLOCK_ENABLE ( 1 << 10 ) /* ssp */
+#define CGU_TIMER1_CLOCK_ENABLE ( 1 << 9 ) /* timer 1 */
+#define CGU_TIMER2_CLOCK_ENABLE ( 1 << 8 ) /* timer 2 */
+#define CGU_TIMERIF_CLOCK_ENABLE ( 1 << 7 ) /* timer
+interface */
+
+/** ------------------------------------------------------------------
+* Number of cycles to wait before cgu is safely locked.
+**/
+#define CGU_LOCK_CNT 0xFF
+
+/* FIFO depth is 16 for tx and rx fifo */
+#define UART_FIFO_DEPTH 16
+
+/* ------------------- UART Line Control Register bit fields -------------------- */
+
+#define UART_LNCTL_DLSEN (1 << 7) /* Device latch select bit */
+
+
+/* -------------- UART Interrupt Control Register bit fields --------------- */
+
+#define UART_INTR_RXDRDY 0x1 /* Data ready interrupt */
+#define UART_INTR_TXEMT 0x2 /* Transmit data empty interrupt */
+#define UART_INTR_RXLINESTATUS 0x4 /* Receive line status interrupt */
+
+/* ------------------- UART Line Status Register bit fields -------------------- */
+
+#define UART_ERRORBITS 0x1E
+#define UART_RX_DATA_READY (1 << 0)
+#define UART_TX_HOLD_EMPTY (1 << 5)
+
+/* ------------------- FIFO CNTL Register contants -------------------*/
+
+#define UART_FIFO_EN (1 << 0) /* Enable the UART FIFO */
+#define UART_TX_FIFO_RST (1 << 1) /* Enable the UART FIFO */
+#define UART_RX_FIFO_RST (1 << 2)
+#define UART_RXFIFO_TRIGLVL_1 (0 << 4) /* RX FIFO TRIGGER_LEVEL 1 */
+#define UART_RXFIFO_TRIGLVL_4 0x08 /* RX FIFO TRIGGER_LEVEL 4 */
+#define UART_RXFIFO_TRIGLVL_8 0x10 /* RX FIFO TRIGGER_LEVEL 8 */
+#define UART_RXFIFO_TRIGLVL_14 0x18 /* RX FIFO TRIGGER_LEVEL 14 */
+
+
+/* ------------------- FIFO status Register contants ------------------*/
+#define UART_TX_FIFO_FULL (1 << 0)
+#define UART_RX_FIFO_FULL (1 << 1)
+#define UART_TX_FIFO_EMPTY (1 << 2)
+#define UART_RX_FIFO_EMPTY (1 << 3)
+
+
+/* ----------------------- defines ---------------------------------------- */
+
+
+
+#define UART_DATA_REG (*(volatile unsigned long*)(UART0_BASE + 0x00)) /* Data register */
+#define UART_DLO_REG (*(volatile unsigned long*)(UART0_BASE + 0x00)) /* Clock divider(lower byte) register */
+#define UART_DHI_REG (*(volatile unsigned long*)(UART0_BASE + 0x04)) /* Clock divider(higher byte) register */
+#define UART_INTEN_REG (*(volatile unsigned long*)(UART0_BASE + 0x04)) /* Interrupt enable register */
+#define UART_INTSTATUS_REG (*(volatile unsigned long*)(UART0_BASE + 0x08)) /* Interrupt status register */
+#define UART_FCTL_REG (*(volatile unsigned long*)(UART0_BASE + 0x0C)) /* Fifo control register */
+#define UART_FSTATUS_REG (*(volatile unsigned long*)(UART0_BASE + 0x0C)) /* Fifo status register */
+#define UART_LNCTL_REG (*(volatile unsigned long*)(UART0_BASE + 0x10)) /* Line control register */
+#define UART_LNSTATUS_REG (*(volatile unsigned long*)(UART0_BASE + 0x14)) /* Line status register */
+
+
+
+
+#define TIMER_LOAD (*(volatile unsigned long*)(TIMER_BASE + 0x00)) /* 32-bit width */
+#define TIMER_VALUE (*(volatile unsigned long*)(TIMER_BASE + 0x04)) /* 32 bit width */
+#define TIMER_CONTROL (*(volatile unsigned long*)(TIMER_BASE + 0x08)) /* 8 bit width */
+#define TIMER_INTCLR (*(volatile unsigned long*)(TIMER_BASE + 0x0C)) /* clears ir by write access */
+#define TIMER_RIS (*(volatile unsigned long*)(TIMER_BASE + 0x10)) /* 1 bit width */
+#define TIMER_MIS (*(volatile unsigned long*)(TIMER_BASE + 0x14)) /* 1 bit width */
+
+/**
+* Counter/Timer control register bits
+**/
+#define TIMER_ENABLE 0x80
+#define TIMER_PERIODIC 0x40
+#define TIMER_INT_ENABLE 0x20
+#define TIMER_32_BIT 0x02
+#define TIMER_ONE_SHOT 0x01
+#define TIMER_PRESCALE_1 0x00
+#define TIMER_PRESCALE_16 0x04
+#define TIMER_PRESCALE_256 0x08
+
+/* GPIO registers */
+
+#define GPIOA_DIR (*(volatile unsigned long*)(GPIOA_BASE+0x400))
+#define GPIOA_AFSEL (*(volatile unsigned char*)(GPIOA_BASE+0x420))
+#define GPIOA_PIN(a) (*(volatile unsigned long*)(GPIOA_BASE+4*(1<<(a))))
+
+#define GPIOB_DIR (*(volatile unsigned long*)(GPIOB_BASE+0x400))
+#define GPIOB_AFSEL (*(volatile unsigned char*)(GPIOB_BASE+0x420))
+#define GPIOB_PIN(a) (*(volatile unsigned long*)(GPIOB_BASE+4*(1<<(a))))
+
+#define GPIOC_DIR (*(volatile unsigned long*)(GPIOC_BASE+0x400))
+#define GPIOC_AFSEL (*(volatile unsigned char*)(GPIOC_BASE+0x420))
+#define GPIOC_PIN(a) (*(volatile unsigned long*)(GPIOC_BASE+4*(1<<(a))))
+
+#define GPIOD_DIR (*(volatile unsigned long*)(GPIOD_BASE+0x400))
+#define GPIOD_AFSEL (*(volatile unsigned char*)(GPIOD_BASE+0x420))
+#define GPIOD_PIN(a) (*(volatile unsigned long*)(GPIOD_BASE+4*(1<<(a))))
+
+#endif /*__AS3525_H__*/
diff --git a/firmware/export/config-clip.h b/firmware/export/config-clip.h
new file mode 100644
index 0000000000..b6ffccecab
--- /dev/null
+++ b/firmware/export/config-clip.h
@@ -0,0 +1,176 @@
+/*
+ * This config file is for the Sandisk Sansa e200
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 50
+#define MODEL_NAME "Sandisk Sansa Clip"
+#define FIRMWARE_OFFSET_FILE_DATA 0
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+#if 0
+#define HW_SAMPR_CAPS (SAMPR_CAP_44)
+
+/* define this if you have recording possibility */
+#define HAVE_RECORDING
+
+#define REC_SAMPR_CAPS (SAMPR_CAP_22)
+#define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */
+#define REC_SAMPR_DEFAULT SAMPR_22
+
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+ explicitly if different */
+#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
+#endif
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a light associated with the buttons */
+#define HAVE_BUTTON_LIGHT
+
+/* define this if you have access to the quickscreen */
+//#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+//#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+//#define HAVE_TAGCACHE
+
+/* LCD dimensions */
+#define LCD_WIDTH 128
+#define LCD_HEIGHT 64
+#define LCD_DEPTH 1
+#define LCD_PIXELFORMAT VERTICAL_PACKING
+
+/* define this if you have LCD enable function */
+#define HAVE_LCD_ENABLE
+
+#ifndef BOOTLOADER
+
+/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
+ should be defined as well. */
+//#define HAVE_LCD_SLEEP
+//#define HAVE_LCD_SLEEP_SETTING
+#endif
+
+/* define this if you can flip your LCD */
+//#define HAVE_LCD_FLIP
+
+/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
+
+#define CONFIG_KEYPAD SANSA_CLIP_PAD
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+/* There is no hardware tone control */
+#define HAVE_SW_TONE_CONTROLS
+
+#define HAVE_AS3525
+
+/* define this if you have a real-time clock */
+#ifndef BOOTLOADER
+//#define CONFIG_RTC RTC_AS3525
+#endif
+
+/* Define this if you have a software controlled poweroff */
+//#define HAVE_SW_POWEROFF
+
+#define HAVE_FAT16SUPPORT
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0
+//#define CODEC_SIZE 0x80000
+
+/* The number of bytes reserved for loadable plugins */
+//#define PLUGIN_BUFFER_SIZE 0x80000
+
+#define AB_REPEAT_ENABLE 1
+
+/* FM Tuner */
+//#define CONFIG_TUNER LV24020LP
+//#define HAVE_TUNER_PWR_CTRL
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+#define HAVE_BACKLIGHT_BRIGHTNESS
+
+/* define this if you have a flash memory storage */
+#define HAVE_FLASH_STORAGE
+
+/* define this if the flash memory uses the SecureDigital Memory Card protocol */
+#define HAVE_ATA_SD
+
+#define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 0 /* capacity increment */
+#define BATTERY_TYPES_COUNT 1 /* only one type */
+
+/* Hardware controlled charging? FIXME */
+#define CONFIG_CHARGING CHARGING_SIMPLE
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+/** Non-simulator section **/
+#ifndef SIMULATOR
+
+/* Define this if you have a PortalPlayer PP5024 */
+#define CONFIG_CPU AS3525
+
+/* Define this if you want to use the PP5024 i2c interface */
+#define CONFIG_I2C I2C_AS3525
+
+/* define this if the hardware can be powered off while charging */
+/* Sansa can't be powered off while charging */
+/* #define HAVE_POWEROFF_WHILE_CHARGING */
+
+/* The start address index for ROM builds */
+#define ROM_START 0x00000000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ 250000000
+
+/* Type of LCD */
+#define CONFIG_LCD LCD_SSD1303
+
+#ifndef BOOTLOADER
+#define HAVE_MULTIVOLUME
+#define HAVE_HOTSWAP
+
+/* USB On-the-go */
+#define CONFIG_USBOTG USBOTG_ARC
+
+/* enable these for the experimental usb stack */
+#define HAVE_USBSTACK
+#define USB_VENDOR_ID 0x0781
+#define USB_PRODUCT_ID 0x7421
+#endif /* BOOTLOADER */
+
+/* Virtual LED (icon) */
+#define CONFIG_LED LED_VIRTUAL
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define ICODE_ATTR_TREMOR_NOT_MDCT
+
+#define INCLUDE_TIMEOUT_API
+
+#endif /* SIMULATOR */
+
+/** Port-specific settings **/
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING 1
+#define MAX_BRIGHTNESS_SETTING 12
+#define DEFAULT_BRIGHTNESS_SETTING 6
+
+/* Default recording levels */
+#define DEFAULT_REC_MIC_GAIN 23
+#define DEFAULT_REC_LEFT_GAIN 23
+#define DEFAULT_REC_RIGHT_GAIN 23
diff --git a/firmware/export/config.h b/firmware/export/config.h
index f6ec686b1f..7d36289ff2 100644
--- a/firmware/export/config.h
+++ b/firmware/export/config.h
@@ -61,6 +61,7 @@
#define TCC7801 7801
#define S5L8700 8700
#define JZ4732 4732
+#define AS3525 3525
/* CONFIG_KEYPAD */
#define PLAYER_PAD 1
@@ -97,6 +98,7 @@
#define ONDAVX767_PAD 32
#define MEIZU_M6SP_PAD 33
#define MEIZU_M3_PAD 34
+#define SANSA_CLIP_PAD 35
/* CONFIG_REMOTE_KEYPAD */
#define H100_REMOTE 1
@@ -141,6 +143,7 @@
#define LCD_MEIZUM6 28 /* as used by the Meizu M6SP and M6SL (various models) */
#define LCD_ONDAVX747 29 /* as used by the Onda VX747 */
#define LCD_ONDAVX767 30 /* as used by the Onda VX767 */
+#define LCD_SSD1303 31 /* as used by the Sansa Clip */
/* LCD_PIXELFORMAT */
#define HORIZONTAL_PACKING 1
@@ -301,6 +304,8 @@
#include "config-ondavx747.h"
#elif defined(ONDA_VX767)
#include "config-ondavx767.h"
+#elif defined(SANSA_CLIP)
+#include "config-clip.h"
#else
/* no known platform */
#endif
@@ -450,7 +455,7 @@
#define ARM_ARCH 6 /* ARMv6 */
#endif
-#if defined(CPU_TCC77X) || defined(CPU_TCC780X) || (CONFIG_CPU == DM320)
+#if defined(CPU_TCC77X) || defined(CPU_TCC780X) || (CONFIG_CPU == DM320) || (CONFIG_CPU == AS3525)
#define CPU_ARM
#define ARM_ARCH 5 /* ARMv5 */
#endif
diff --git a/firmware/export/cpu.h b/firmware/export/cpu.h
index 86efd31ef1..75ac252ed7 100644
--- a/firmware/export/cpu.h
+++ b/firmware/export/cpu.h
@@ -62,3 +62,6 @@
#if CONFIG_CPU == JZ4732
#include "jz4740.h"
#endif
+#if CONFIG_CPU == AS3525
+#include "as3525.h"
+#endif
diff --git a/firmware/export/timer.h b/firmware/export/timer.h
index 6d95ef7718..f9aa650071 100644
--- a/firmware/export/timer.h
+++ b/firmware/export/timer.h
@@ -34,7 +34,7 @@
#elif CONFIG_CPU == PNX0101
#define TIMER_FREQ 3000000
#elif CONFIG_CPU == S3C2440 || CONFIG_CPU == DM320 || CONFIG_CPU == TCC7801 \
- || defined(CPU_TCC77X)
+ || defined(CPU_TCC77X) || CONFIG_CPU == AS3525
#include "timer-target.h"
#elif defined(SIMULATOR)
#define TIMER_FREQ 1000000