Add in the needed crt0.S code for the wakeup alarm also

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19094 a1c6a512-1295-4272-9138-f99709370657

3 files changed, 131 insertions, 5 deletions

diff --git a/firmware/target/arm/s3c2440/gigabeat-fx/lcd-meg-fx.c b/firmware/target/arm/s3c2440/gigabeat-fx/lcd-meg-fx.c
index ac8dc380e2..e09f628809 100644
--- a/firmware/target/arm/s3c2440/gigabeat-fx/lcd-meg-fx.c
+++ b/firmware/target/arm/s3c2440/gigabeat-fx/lcd-meg-fx.c
@@ -244,7 +244,7 @@ static void LCD_SPI_init(void)
 /* LCD init */
 void lcd_init_device(void)
 {
-#ifdef BOOTLOADER
+#if 0//def BOOTLOADER
     int i;
     /* When the Rockbox bootloader starts, we are changing framebuffer address,
        but we don't want what's shown on the LCD to change until we do an
diff --git a/firmware/target/arm/s3c2440/gigabeat-fx/power-meg-fx.c b/firmware/target/arm/s3c2440/gigabeat-fx/power-meg-fx.c
index 544869ab6c..d625c07cc8 100644
--- a/firmware/target/arm/s3c2440/gigabeat-fx/power-meg-fx.c
+++ b/firmware/target/arm/s3c2440/gigabeat-fx/power-meg-fx.c
@@ -70,6 +70,11 @@ void power_off(void)
     _backlight_off();
     _buttonlight_off();
     sleep(HZ);
+    
+    /* Do this to allow the drive to properly reset when player restarts 
+     * immediately without running OF shutdown.
+     */
+    GPGCON&=~0x00300000; 
 
     /* Rockbox never properly shutdown the player.  When the sleep bit is set
      * the player actually wakes up in some type of "zombie" state 
@@ -81,6 +86,122 @@ void power_off(void)
     CLKCON |=(1<<3);
 
     reboot_point();
+
+#if 0
+    
+    GPBCON=0x00015450;
+    GPBDAT=0x403;
+    GPBUP=0x3FD;
+
+    GPCCON  =0xAAA054A8;
+    GPCDAT  =0x0000038C;
+    GPCUP   =0xFFFF;
+    
+    
+    GPDCON  =0xAAA0AAA5;
+    GPDDAT  =0x00000300;
+    GPDUP   =0xFCFF;
+
+    
+    GPECON  =0xAA8002AA;
+    GPEDAT  =0x0000FFED;
+    GPEUP   =0x3817;
+
+    GPFCON  =0x00000a00; 
+    GPFDAT  =0x000000F1;
+    GPFUP   =0x000000FF;
+
+    GPGCON  =0x01401002;
+    GPGDAT  =0x00000180;
+    GPGUP   =0x0000FF7F;
+
+    GPHCON  =0x001540A5;
+    GPHDAT  =0x000006FD;
+    GPHUP   =0x00000187;
+
+// mine
+    INTMSK  =0xFFFFFFFF;
+    EINTMASK=0x0FFFFEF0;
+    EXTINT0 =0xFFFFFECF;
+    EXTINT1 =0x07;
+//
+
+//    INTMSK=0xFFFFFFFF;
+//    EINTMASK=0x00200000;
+
+//    GPHDAT=0x00000004;
+
+//    EXTINT0=~0x00000130;
+//    INTMSK=(~0x00000130)+0x00000100;
+//    GPGUP=0xFFFFFFFF;
+
+//mine
+    INTMSK  =0xFFFFFFDE;
+//
+
+    SRCPND=0xFFFFFFFF;
+    INTPND=0xFFFFFFFF;
+    GSTATUS1=0x00000600;
+
+    ADCCON=0x00000004;
+
+//    MISCCR=MISCCR&(~0x703000)|0x603000;
+    LCDCON1=0x00000000;
+    LOCKTIME=0xFFFFFFFF;
+//    REFRESH=REFRESH|0x00400000;
+
+//    MISCCR=MISCCR|0x000E0000;
+
+//    CLKCON=CLKCON|0x00004018;
+
+    /* 
+     * This next piece of code was taken from the linux 2.6.17 sources:
+     * linux/arch/arm/mach-s3c2410/sleep.S
+     *
+     * Copyright (c) 2004 Simtec Electronics
+     *      Ben Dooks <ben@simtec.co.uk>
+     * 
+     * Based on PXA/SA1100 sleep code by:
+     *      Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+     *      Cliff Brake, (c) 2001
+     */
+
+    asm volatile 
+    (
+        /* get REFRESH, MISCCR, and CLKCON (and ensure in TLB) */
+        "ldr   r4, =0x48000024      \n"
+        "ldr   r5, =0x56000080      \n"
+        "ldr   r6, =0x4C00000C      \n"
+        "ldr   r7, [ r4 ]           \n"
+        "ldr   r8, [ r5 ]           \n" 
+        "ldr   r9, [ r6 ]           \n" 
+
+        /* Setup register writes */
+        "ldr   r2, =0x006E3000      \n"
+        "ldr   r3, =0x00004018      \n"
+        "orr   r7, r7, #0x00400000  \n" /* SDRAM sleep command */
+        "orr   r8, r8, r2           \n" /* SDRAM power-down signals */
+        "orr   r9, r9, r3           \n" /* power down command */
+
+        /* first as a trial-run to load cache */
+        "teq   pc, #0               \n"         
+        "bl    s3c2410_do_sleep     \n"
+
+        /* now do it for real */
+        "teq   r0, r0               \n" 
+        "b     s3c2410_do_sleep     \n"
+
+        /* align next bit of code to cache line */
+        ".align  8                  \n"
+        "s3c2410_do_sleep:          \n"
+        "streq r7, [ r4 ]           \n" /* SDRAM sleep command */
+        "streq r8, [ r5 ]           \n" /* SDRAM power-down config */
+        "streq r3, [ r6 ]           \n" /* CPU sleep */
+        "1:                         \n"
+        "beq   1b                   \n"
+        "bx lr                      \n"
+    );
+#endif
 }
 
 #else /* SIMULATOR */
diff --git a/firmware/target/arm/s3c2440/gigabeat-fx/system-meg-fx.c b/firmware/target/arm/s3c2440/gigabeat-fx/system-meg-fx.c
index 8065926e28..96afa9b238 100644
--- a/firmware/target/arm/s3c2440/gigabeat-fx/system-meg-fx.c
+++ b/firmware/target/arm/s3c2440/gigabeat-fx/system-meg-fx.c
@@ -113,9 +113,14 @@ void system_reboot(void)
 
 static void set_page_tables(void)
 {
-    map_section(0, 0, 0x1000, CACHE_NONE); /* map every memory region to itself */
-    map_section(0x30000000, 0, 32, CACHE_ALL); /* map RAM to 0 and enable caching for it */
-    map_section((int)FRAME, (int)FRAME, 1, BUFFERED); /* enable buffered writing for the framebuffer */
+    /* map every memory region to itself */
+    map_section(0, 0, 0x1000, CACHE_NONE); 
+    
+    /* map RAM to 0 and enable caching for it */
+    map_section(0x30000000, 0, 32, CACHE_ALL); 
+    
+    /* enable buffered writing for the framebuffer */
+    map_section((int)FRAME, (int)FRAME, 1, BUFFERED); 
 }
 
 void memory_init(void) {
@@ -145,7 +150,7 @@ void s3c_regclr(volatile int *reg, unsigned int mask)
 void system_init(void)
 {
     INTMSK = 0xFFFFFFFF;
-     INTMOD =  0;
+    INTMOD = 0;
     SRCPND = 0xFFFFFFFF;
     INTPND = 0xFFFFFFFF;
     INTSUBMSK = 0xFFFFFFFF;