summaryrefslogtreecommitdiffstats
path: root/firmware/target/arm
diff options
context:
space:
mode:
authorAmaury Pouly <pamaury@rockbox.org>2011-06-30 17:31:40 +0000
committerAmaury Pouly <pamaury@rockbox.org>2011-06-30 17:31:40 +0000
commit617d1e9f6b7969aff5e45746b9c5e3cee9ce2c45 (patch)
treebf2015d298c2b6bc80189d09b73426380e08451f /firmware/target/arm
parent4a04c47a97517930b29f00b9d7f4d157cb69fa9b (diff)
downloadrockbox-617d1e9f6b7969aff5e45746b9c5e3cee9ce2c45.tar.gz
rockbox-617d1e9f6b7969aff5e45746b9c5e3cee9ce2c45.zip
imx233/fuze+: ssp, dma, mmc now work properly, partially implement cpu frequency changing, implement panic waiting
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30104 a1c6a512-1295-4272-9138-f99709370657
Diffstat (limited to 'firmware/target/arm')
-rw-r--r--firmware/target/arm/imx233/clkctrl-imx233.c16
-rw-r--r--firmware/target/arm/imx233/clkctrl-imx233.h27
-rw-r--r--firmware/target/arm/imx233/mmc-imx233.c146
-rw-r--r--firmware/target/arm/imx233/sd-imx233.c2
-rw-r--r--firmware/target/arm/imx233/ssp-imx233.c61
-rw-r--r--firmware/target/arm/imx233/ssp-imx233.h13
-rw-r--r--firmware/target/arm/imx233/system-imx233.c29
-rw-r--r--firmware/target/arm/imx233/system-target.h41
-rw-r--r--firmware/target/arm/imx233/usb-imx233.c1
9 files changed, 287 insertions, 49 deletions
diff --git a/firmware/target/arm/imx233/clkctrl-imx233.c b/firmware/target/arm/imx233/clkctrl-imx233.c
index 7701b84c41..ee77a77493 100644
--- a/firmware/target/arm/imx233/clkctrl-imx233.c
+++ b/firmware/target/arm/imx233/clkctrl-imx233.c
@@ -60,15 +60,25 @@ void imx233_set_clock_divisor(enum imx233_clock_t clk, int div)
switch(clk)
{
case CLK_PIX:
- __REG_CLR(HW_CLKCTRL_PIX) = (1 << 12) - 1;
+ __REG_CLR(HW_CLKCTRL_PIX) = HW_CLKCTRL_PIX__DIV_BM;
__REG_SET(HW_CLKCTRL_PIX) = div;
while(HW_CLKCTRL_PIX & __CLK_BUSY);
break;
case CLK_SSP:
- __REG_CLR(HW_CLKCTRL_SSP) = (1 << 9) - 1;
+ __REG_CLR(HW_CLKCTRL_SSP) = HW_CLKCTRL_SSP__DIV_BM;
__REG_SET(HW_CLKCTRL_SSP) = div;
while(HW_CLKCTRL_SSP & __CLK_BUSY);
break;
+ case CLK_CPU:
+ __REG_CLR(HW_CLKCTRL_CPU) = HW_CLKCTRL_CPU__DIV_CPU_BM;
+ __REG_SET(HW_CLKCTRL_CPU) = div;
+ while(HW_CLKCTRL_CPU & HW_CLKCTRL_CPU__BUSY_REF_CPU);
+ break;
+ case CLK_AHB:
+ __REG_CLR(HW_CLKCTRL_HBUS) = HW_CLKCTRL_HBUS__DIV_BM;
+ __REG_SET(HW_CLKCTRL_HBUS) = div;
+ while(HW_CLKCTRL_HBUS & __CLK_BUSY);
+ break;
default: return;
}
}
@@ -81,6 +91,7 @@ void imx233_set_fractional_divisor(enum imx233_clock_t clk, int fracdiv)
{
case CLK_PIX: REG = &HW_CLKCTRL_FRAC_PIX; break;
case CLK_IO: REG = &HW_CLKCTRL_FRAC_IO; break;
+ case CLK_CPU: REG = &HW_CLKCTRL_FRAC_CPU; break;
default: return;
}
@@ -97,6 +108,7 @@ void imx233_set_bypass_pll(enum imx233_clock_t clk, bool bypass)
{
case CLK_PIX: msk = HW_CLKCTRL_CLKSEQ__BYPASS_PIX; break;
case CLK_SSP: msk = HW_CLKCTRL_CLKSEQ__BYPASS_SSP; break;
+ case CLK_CPU: msk = HW_CLKCTRL_CLKSEQ__BYPASS_CPU; break;
default: return;
}
diff --git a/firmware/target/arm/imx233/clkctrl-imx233.h b/firmware/target/arm/imx233/clkctrl-imx233.h
index 1533b52cce..2a12129171 100644
--- a/firmware/target/arm/imx233/clkctrl-imx233.h
+++ b/firmware/target/arm/imx233/clkctrl-imx233.h
@@ -27,15 +27,34 @@
#define HW_CLKCTRL_BASE 0x80040000
+#define HW_CLKCTRL_PLLCTRL0 (*(volatile uint32_t *)(HW_CLKCTRL_BASE + 0x0))
+#define HW_CLKCTRL_PLLCTRL0__DIV_SEL_BP 20
+#define HW_CLKCTRL_PLLCTRL0__DIV_SEL_BM (3 << 20)
+
+#define HW_CLKCTRL_PLLCTRL1 (*(volatile uint32_t *)(HW_CLKCTRL_BASE + 0x10))
+
+#define HW_CLKCTRL_CPU (*(volatile uint32_t *)(HW_CLKCTRL_BASE + 0x20))
+#define HW_CLKCTRL_CPU__DIV_CPU_BP 0
+#define HW_CLKCTRL_CPU__DIV_CPU_BM 0x3f
+#define HW_CLKCTRL_CPU__BUSY_REF_CPU (1 << 28)
+
+#define HW_CLKCTRL_HBUS (*(volatile uint32_t *)(HW_CLKCTRL_BASE + 0x30))
+#define HW_CLKCTRL_HBUS__DIV_BP 0
+#define HW_CLKCTRL_HBUS__DIV_BM 0x1f
+
#define HW_CLKCTRL_XTAL (*(volatile uint32_t *)(HW_CLKCTRL_BASE + 0x50))
#define HW_CLKCTRL_XTAL__TIMROT_CLK32K_GATE (1 << 26)
#define HW_CLKCTRL_PIX (*(volatile uint32_t *)(HW_CLKCTRL_BASE + 0x60))
+#define HW_CLKCTRL_PIX__DIV_BM 0xfff
+
#define HW_CLKCTRL_SSP (*(volatile uint32_t *)(HW_CLKCTRL_BASE + 0x70))
+#define HW_CLKCTRL_SSP__DIV_BM 0x1ff
#define HW_CLKCTRL_CLKSEQ (*(volatile uint32_t *)(HW_CLKCTRL_BASE + 0x110))
#define HW_CLKCTRL_CLKSEQ__BYPASS_PIX (1 << 1)
#define HW_CLKCTRL_CLKSEQ__BYPASS_SSP (1 << 5)
+#define HW_CLKCTRL_CLKSEQ__BYPASS_CPU (1 << 7)
#define HW_CLKCTRL_FRAC (*(volatile uint32_t *)(HW_CLKCTRL_BASE + 0xf0))
#define HW_CLKCTRL_FRAC_CPU (*(volatile uint8_t *)(HW_CLKCTRL_BASE + 0xf0))
@@ -52,9 +71,11 @@
enum imx233_clock_t
{
- CLK_PIX,
- CLK_SSP,
- CLK_IO,
+ CLK_PIX, /* div, frac */
+ CLK_SSP, /* div, frac */
+ CLK_IO, /* div */
+ CLK_CPU, /* div, frac */
+ CLK_AHB /* div */
};
void imx233_enable_timrot_xtal_clk32k(bool enable);
diff --git a/firmware/target/arm/imx233/mmc-imx233.c b/firmware/target/arm/imx233/mmc-imx233.c
index f56ff3725c..dafe63f3d3 100644
--- a/firmware/target/arm/imx233/mmc-imx233.c
+++ b/firmware/target/arm/imx233/mmc-imx233.c
@@ -22,36 +22,54 @@
#include "system.h"
#include "mmc.h"
#include "sdmmc.h"
+#include "storage.h"
#include "ssp-imx233.h"
#include "pinctrl-imx233.h"
#include "button-target.h"
+/**
+ * This code assumes a single eMMC internal flash
+ */
+
#ifdef SANSA_FUZEPLUS
#define MMC_SSP 2
#else
#error You need to configure the ssp to use
#endif
+#define MMC_RCA 1
+
+/** When set, this values restrict the windows of the read and writes */
+static unsigned mmc_window_start = 0;
+static unsigned mmc_window_end = INT_MAX;
+
+static struct mutex mmc_mutex;
+
int mmc_init(void)
{
+ mutex_init(&mmc_mutex);
+
imx233_ssp_start(MMC_SSP);
imx233_ssp_softreset(MMC_SSP);
imx233_ssp_set_mode(MMC_SSP, HW_SSP_CTRL1__SSP_MODE__SD_MMC);
#ifdef SANSA_FUZEPLUS
- /** Sansa Fuze+ has an internal eMMC 8-bit wide flash, power gate is pin PWM3 */
+ /** Sansa Fuze+ has an internal eMMC 8-bit wide flash, power gate is pin PWM3
+ * and power up time is 20ms */
imx233_set_pin_function(1, 29, PINCTRL_FUNCTION_GPIO);
imx233_enable_gpio_output(1, 29, true);
imx233_set_gpio_output(1, 29, false);
+ sleep(HZ / 5);
imx233_ssp_setup_ssp2_sd_mmc_pins(true, 8, PINCTRL_DRIVE_8mA);
#endif
- /* SSPCLK @ 120MHz
- * gives bitrate of 120 / 100 / 3 = 400kHz */
- imx233_ssp_set_timings(MMC_SSP, 100, 2);
- imx233_ssp_set_timeout(MMC_SSP, 0xffff);
+ /* SSPCLK @ 96MHz
+ * gives bitrate of 96000 / 240 / 1 = 400kHz */
+ imx233_ssp_set_timings(MMC_SSP, 240, 0, 0xffff);
imx233_ssp_sd_mmc_power_up_sequence(MMC_SSP);
+ imx233_ssp_set_bus_width(MMC_SSP, 1);
+ imx233_ssp_set_block_size(MMC_SSP, 9);
/* go to idle state */
- int ret = imx233_ssp_sd_mmc_transfer(MMC_SSP, SD_GO_IDLE_STATE, 0, SSP_NO_RESP, NULL, 0, false, NULL);
+ int ret = imx233_ssp_sd_mmc_transfer(MMC_SSP, SD_GO_IDLE_STATE, 0, SSP_NO_RESP, NULL, 0, false, false, NULL);
if(ret != 0)
return -1;
/* send op cond until the card respond with busy bit set; it must complete within 1sec */
@@ -59,18 +77,82 @@ int mmc_init(void)
do
{
uint32_t ocr;
- ret = imx233_ssp_sd_mmc_transfer(MMC_SSP, 1, 0x40ff8000, SSP_SHORT_RESP, NULL, 0, false, &ocr);
+ ret = imx233_ssp_sd_mmc_transfer(MMC_SSP, 1, 0x40ff8000, SSP_SHORT_RESP, NULL, 0, false, false, &ocr);
if(ret == 0 && ocr & (1 << 31))
break;
}while(!TIME_AFTER(current_tick, timeout));
if(ret != 0)
return -2;
-
+ /* get CID */
uint32_t cid[4];
- ret = imx233_ssp_sd_mmc_transfer(MMC_SSP, 2, 0, SSP_LONG_RESP, NULL, 0, false, cid);
+ ret = imx233_ssp_sd_mmc_transfer(MMC_SSP, 2, 0, SSP_LONG_RESP, NULL, 0, false, false, cid);
if(ret != 0)
return -3;
+ /* Set RCA */
+ uint32_t status;
+ ret = imx233_ssp_sd_mmc_transfer(MMC_SSP, 3, MMC_RCA << 16, SSP_SHORT_RESP, NULL, 0, false, false, &status);
+ if(ret != 0)
+ return -4;
+ /* Select card */
+ ret = imx233_ssp_sd_mmc_transfer(MMC_SSP, 7, MMC_RCA << 16, SSP_SHORT_RESP, NULL, 0, false, false, &status);
+ if(ret != 0)
+ return -5;
+ /* Check TRAN state */
+ ret = imx233_ssp_sd_mmc_transfer(MMC_SSP, 13, MMC_RCA << 16, SSP_SHORT_RESP, NULL, 0, false, false, &status);
+ if(ret != 0)
+ return -6;
+ if(((status >> 9) & 0xf) != 4)
+ return -7;
+ /* Switch to 8-bit bus */
+ ret = imx233_ssp_sd_mmc_transfer(MMC_SSP, 6, 0x3b70200, SSP_SHORT_RESP, NULL, 0, true, false, &status);
+ if(ret != 0)
+ return -8;
+ /* switch error ? */
+ if(status & 0x80)
+ return -9;
+ imx233_ssp_set_bus_width(MMC_SSP, 8);
+ /* Switch to high speed mode */
+ ret = imx233_ssp_sd_mmc_transfer(MMC_SSP, 6, 0x3b90100, SSP_SHORT_RESP, NULL, 0, true, false, &status);
+ if(ret != 0)
+ return -10;
+ /* switch error ?*/
+ if(status & 0x80)
+ return -11;
+ /* SSPCLK @ 96MHz
+ * gives bitrate of 96 / 2 / 1 = 48MHz */
+ imx233_ssp_set_timings(MMC_SSP, 2, 0, 0xffff);
+
+ #ifdef SANSA_FUZEPLUS
+ /**
+ * The Fuze+ uses a strange layout: is has a first MBR at sector 0 with four entries:
+ * 1) Actual user partition
+ * 2) Sigmatel boot partition
+ * 3)4) Other (certificate related ?) partitions
+ * The partition 1) has type 1 but it's actually a type 5 (logical partition) with
+ * a second partition table with usually one entry which is the FAT32 one.
+ * The first table uses 512-byte sector size and the second one usually uses
+ * 2048-byte logical sector size.
+ *
+ * We restrict mmc window to the user partition */
+ uint8_t mbr[512];
+ mmc_window_start = 0;
+ mmc_window_end = INT_MAX;
+ ret = mmc_read_sectors(IF_MD2(0,) 0, 1, mbr);
+ if(ret != 0)
+ return -100;
+ if(mbr[510] != 0x55 || mbr[511] != 0xAA)
+ return -101; /* invalid MBR */
+ /* sanity check that the first partition is greater than 2Gib */
+ uint8_t *ent = &mbr[446];
+ mmc_window_start = ent[8] | ent[9] << 8 | ent[10] << 16 | ent[11] << 24;
+ mmc_window_end = (ent[12] | ent[13] << 8 | ent[14] << 16 | ent[15] << 24) +
+ mmc_window_start;
+ if(ent[4] == 0x53)
+ return -102; /* sigmatel partition */
+ if((mmc_window_end - mmc_window_start) < 4 * 1024 * 1024)
+ return -103; /* partition too small */
+ #endif
return 0;
}
@@ -81,13 +163,49 @@ int mmc_num_drives(int first_drive)
return 1;
}
-int mmc_read_sectors(IF_MD2(int drive,) unsigned long start, int count, void* buf)
+#ifdef STORAGE_GET_INFO
+void mmc_get_info(IF_MD2(int drive,) struct storage_info *info)
+{
+#ifdef HAVE_MULTIDRIVE
+ (void) drive;
+#endif
+ info->sector_size = 512;
+ info->num_sectors = 0xECC000 - 0x0001ac00;
+ info->vendor = "Rockbox";
+ info->product = "Internal Storage";
+ info->revision = "0.00";
+}
+#endif
+
+int mmc_read_sectors(IF_MD2(int drive,) unsigned long start, int count, void *buf)
{
IF_MD((void) drive);
- (void) start;
- (void) count;
- (void) buf;
- return -1;
+ /* check window */
+ start += mmc_window_start;
+ if((start + count) > mmc_window_end)
+ return -201;
+ /* get mutex (needed because we done multiple commands for count > 0 */
+ mutex_lock(&mmc_mutex);
+ int ret = 0;
+ uint32_t resp;
+
+ if(count == 1)
+ {
+ ret = imx233_ssp_sd_mmc_transfer(MMC_SSP, 17, start, SSP_SHORT_RESP, buf,
+ count, false, true, &resp);
+ }
+ else
+ {
+ ret = imx233_ssp_sd_mmc_transfer(MMC_SSP, 23, count, SSP_SHORT_RESP, NULL,
+ 0, false, false, &resp);
+ if(ret == 0)
+ ret = imx233_ssp_sd_mmc_transfer(MMC_SSP, 18, start, SSP_SHORT_RESP, buf,
+ count, false, true, &resp);
+ }
+
+ mutex_unlock(&mmc_mutex);
+
+ return ret;
}
int mmc_write_sectors(IF_MD2(int drive,) unsigned long start, int count, const void* buf)
diff --git a/firmware/target/arm/imx233/sd-imx233.c b/firmware/target/arm/imx233/sd-imx233.c
index 6f30c7a3c6..ccd8bf35c1 100644
--- a/firmware/target/arm/imx233/sd-imx233.c
+++ b/firmware/target/arm/imx233/sd-imx233.c
@@ -25,7 +25,7 @@
int sd_init(void)
{
- return -1;
+ return 0;
}
int sd_read_sectors(IF_MD2(int drive,) unsigned long start, int count,
diff --git a/firmware/target/arm/imx233/ssp-imx233.c b/firmware/target/arm/imx233/ssp-imx233.c
index c6be869ce6..22824964f3 100644
--- a/firmware/target/arm/imx233/ssp-imx233.c
+++ b/firmware/target/arm/imx233/ssp-imx233.c
@@ -42,6 +42,8 @@ static int ssp_in_use = 0;
static struct mutex ssp_mutex[2];
static struct semaphore ssp_sema[2];
static struct ssp_dma_command_t ssp_dma_cmd[2];
+static uint32_t ssp_bus_width[2];
+static unsigned ssp_log_block_size[2];
void INT_SSP(int ssp)
{
@@ -84,6 +86,7 @@ void imx233_ssp_init(void)
semaphore_init(&ssp_sema[1], 1, 0);
mutex_init(&ssp_mutex[0]);
mutex_init(&ssp_mutex[1]);
+ ssp_bus_width[0] = ssp_bus_width[1] = HW_SSP_CTRL0__BUS_WIDTH__ONE_BIT;
}
void imx233_ssp_start(int ssp)
@@ -96,11 +99,12 @@ void imx233_ssp_start(int ssp)
/* If first block to start, start SSP clock */
if(ssp_in_use == 0)
{
+ /** 2.3.1: the clk_ssp maximum frequency is 102.858 MHz */
/* fracdiv = 18 => clk_io = pll = 480Mhz
- * intdiv = 4 => clk_ssp = 120Mhz */
+ * intdiv = 5 => clk_ssp = 96Mhz */
imx233_set_fractional_divisor(CLK_IO, 18);
imx233_enable_clock(CLK_SSP, false);
- imx233_set_clock_divisor(CLK_SSP, 4);
+ imx233_set_clock_divisor(CLK_SSP, 5);
imx233_set_bypass_pll(CLK_SSP, false); /* use IO */
imx233_enable_clock(CLK_SSP, true);
}
@@ -127,18 +131,9 @@ void imx233_ssp_softreset(int ssp)
imx233_reset_block(&HW_SSP_CTRL0(ssp));
}
-void imx233_ssp_set_timings(int ssp, int divide, int rate)
+void imx233_ssp_set_timings(int ssp, int divide, int rate, int timeout)
{
- __REG_CLR(HW_SSP_TIMING(ssp)) =
- HW_SSP_TIMING__CLOCK_DIVIDE_BM | HW_SSP_TIMING__CLOCK_RATE_BM;
- __REG_SET(HW_SSP_TIMING(ssp)) =
- divide << HW_SSP_TIMING__CLOCK_DIVIDE_BP | rate;
-}
-
-void imx233_ssp_set_timeout(int ssp, int timeout)
-{
- __REG_CLR(HW_SSP_TIMING(ssp)) = HW_SSP_TIMING__CLOCK_TIMEOUT_BM;
- __REG_SET(HW_SSP_TIMING(ssp)) =
+ HW_SSP_TIMING(ssp) = divide << HW_SSP_TIMING__CLOCK_DIVIDE_BP | rate |
timeout << HW_SSP_TIMING__CLOCK_TIMEOUT_BP;
}
@@ -238,22 +233,43 @@ void imx233_ssp_set_mode(int ssp, unsigned mode)
}
}
-enum imx233_ssp_error_t imx233_ssp_sd_mmc_transfer(int ssp, uint8_t cmd, uint32_t cmd_arg,
- enum imx233_ssp_resp_t resp, void *buffer, int xfer_size, bool read, uint32_t *resp_ptr)
+void imx233_ssp_set_bus_width(int ssp, unsigned width)
+{
+ switch(width)
+ {
+ case 1: ssp_bus_width[ssp - 1] = HW_SSP_CTRL0__BUS_WIDTH__ONE_BIT; break;
+ case 4: ssp_bus_width[ssp - 1] = HW_SSP_CTRL0__BUS_WIDTH__FOUR_BIT; break;
+ case 8: ssp_bus_width[ssp - 1] = HW_SSP_CTRL0__BUS_WIDTH__EIGHT_BIT; break;
+ }
+}
+
+void imx233_ssp_set_block_size(int ssp, unsigned log_block_size)
+{
+ ssp_log_block_size[ssp - 1] = log_block_size;
+}
+
+enum imx233_ssp_error_t imx233_ssp_sd_mmc_transfer(int ssp, uint8_t cmd,
+ uint32_t cmd_arg, enum imx233_ssp_resp_t resp, void *buffer, unsigned block_count,
+ bool wait4irq, bool read, uint32_t *resp_ptr)
{
mutex_lock(&ssp_mutex[ssp - 1]);
/* Enable all interrupts */
imx233_enable_interrupt(INT_SRC_SSP_DMA(ssp), true);
imx233_dma_enable_channel_interrupt(APB_SSP(ssp), true);
- /* Assume only one block so ignore block_count and block_size */
- ssp_dma_cmd[ssp - 1].cmd0 = cmd | HW_SSP_CMD0__APPEND_8CYC;
+
+ unsigned xfer_size = block_count * (1 << ssp_log_block_size[ssp - 1]);
+
+ ssp_dma_cmd[ssp - 1].cmd0 = cmd | HW_SSP_CMD0__APPEND_8CYC |
+ ssp_log_block_size[ssp - 1] << HW_SSP_CMD0__BLOCK_SIZE_BP |
+ (block_count - 1) << HW_SSP_CMD0__BLOCK_COUNT_BP;
ssp_dma_cmd[ssp - 1].cmd1 = cmd_arg;
/* setup all flags and run */
ssp_dma_cmd[ssp - 1].ctrl0 = xfer_size | HW_SSP_CTRL0__ENABLE |
- HW_SSP_CTRL0__IGNORE_CRC |
- (resp != SSP_NO_RESP ? HW_SSP_CTRL0__GET_RESP | HW_SSP_CTRL0__WAIT_FOR_IRQ : 0) |
+ (buffer ? 0 : HW_SSP_CTRL0__IGNORE_CRC) |
+ (wait4irq ? HW_SSP_CTRL0__WAIT_FOR_IRQ : 0) |
+ (resp != SSP_NO_RESP ? HW_SSP_CTRL0__GET_RESP : 0) |
(resp == SSP_LONG_RESP ? HW_SSP_CTRL0__LONG_RESP : 0) |
- HW_SSP_CTRL0__BUS_WIDTH__ONE_BIT << HW_SSP_CTRL0__BUS_WIDTH_BP |
+ (ssp_bus_width[ssp - 1] << HW_SSP_CTRL0__BUS_WIDTH_BP) |
(buffer ? HW_SSP_CTRL0__DATA_XFER : 0) |
(read ? HW_SSP_CTRL0__READ : 0);
/* setup the dma parameters */
@@ -263,10 +279,11 @@ enum imx233_ssp_error_t imx233_ssp_sd_mmc_transfer(int ssp, uint8_t cmd, uint32_
(buffer == NULL ? HW_APB_CHx_CMD__COMMAND__NO_XFER :
read ? HW_APB_CHx_CMD__COMMAND__WRITE : HW_APB_CHx_CMD__COMMAND__READ) |
HW_APB_CHx_CMD__IRQONCMPLT | HW_APB_CHx_CMD__SEMAPHORE |
- HW_APB_CHx_CMD__WAIT4ENDCMD | HW_APB_CHx_CMD__HALTONTERMINATE |
+ HW_APB_CHx_CMD__WAIT4ENDCMD |
(3 << HW_APB_CHx_CMD__CMDWORDS_BP) |
(xfer_size << HW_APB_CHx_CMD__XFER_COUNT_BP);
+ imx233_dma_reset_channel(APB_SSP(ssp));
imx233_dma_start_command(APB_SSP(ssp), &ssp_dma_cmd[ssp - 1].dma);
/* the SSP hardware already has a timeout but we never know; 1 sec is a maximum
@@ -283,7 +300,7 @@ enum imx233_ssp_error_t imx233_ssp_sd_mmc_transfer(int ssp, uint8_t cmd, uint32_
else
ret = SSP_ERROR;
- if(ret == SSP_SUCCESS && resp_ptr != NULL)
+ if(resp_ptr != NULL)
{
if(resp != SSP_NO_RESP)
*resp_ptr++ = HW_SSP_SDRESP0(ssp);
diff --git a/firmware/target/arm/imx233/ssp-imx233.h b/firmware/target/arm/imx233/ssp-imx233.h
index e9bdf62b27..c7c891ec0b 100644
--- a/firmware/target/arm/imx233/ssp-imx233.h
+++ b/firmware/target/arm/imx233/ssp-imx233.h
@@ -67,7 +67,7 @@
#define HW_SSP_CMD0__BLOCK_SIZE_BM (0xf << 16)
#define HW_SSP_CMD0__BLOCK_SIZE_BP 16
#define HW_SSP_CMD0__BLOCK_COUNT_BM (0xff << 8)
-#define HW_SSP_CMD0__BLOCK_COUNT_BP 16
+#define HW_SSP_CMD0__BLOCK_COUNT_BP 8
#define HW_SSP_CMD0__CMD_BM 0xff
#define HW_SSP_CMD1(ssp) (*(volatile uint32_t *)(HW_SSP_BASE(ssp) + 0x20))
@@ -147,12 +147,15 @@ void imx233_ssp_start(int ssp);
void imx233_ssp_stop(int ssp);
/* only softreset between start and stop or it might hang ! */
void imx233_ssp_softreset(int ssp);
-void imx233_ssp_set_timings(int ssp, int divide, int rate);
-void imx233_ssp_set_timeout(int ssp, int timeout);
+void imx233_ssp_set_timings(int ssp, int divide, int rate, int timeout);
void imx233_ssp_set_mode(int ssp, unsigned mode);
+void imx233_ssp_set_bus_width(int ssp, unsigned width);
+/* block_size uses the SSP format so it's actually the log_2 of the block_size */
+void imx233_ssp_set_block_size(int ssp, unsigned log_block_size);
/* SD/MMC facilities */
-enum imx233_ssp_error_t imx233_ssp_sd_mmc_transfer(int ssp, uint8_t cmd, uint32_t cmd_arg,
- enum imx233_ssp_resp_t resp, void *buffer, int xfer_size, bool read, uint32_t *resp_ptr);
+enum imx233_ssp_error_t imx233_ssp_sd_mmc_transfer(int ssp, uint8_t cmd,
+ uint32_t cmd_arg, enum imx233_ssp_resp_t resp, void *buffer, unsigned block_count,
+ bool wait4irq, bool read, uint32_t *resp_ptr);
void imx233_ssp_setup_ssp2_sd_mmc_pins(bool enable_pullups, unsigned bus_width,
unsigned drive_strength);
/* SD/MMC requires that the card be provided the clock during an init sequence of
diff --git a/firmware/target/arm/imx233/system-imx233.c b/firmware/target/arm/imx233/system-imx233.c
index 9c843c48c1..6114ecca08 100644
--- a/firmware/target/arm/imx233/system-imx233.c
+++ b/firmware/target/arm/imx233/system-imx233.c
@@ -31,6 +31,7 @@
#include "ssp-imx233.h"
#include "lcd.h"
#include "backlight-target.h"
+#include "button-target.h"
#define default_interrupt(name) \
extern __attribute__((weak, alias("UIRQ"))) void name(void)
@@ -104,7 +105,13 @@ void system_reboot(void)
void system_exception_wait(void)
{
- /* what is this supposed to do ? */
+ /* make sure lcd and backlight are on */
+ _backlight_on();
+ _backlight_set_brightness(100);
+ /* wait until button release (if a button is pressed) */
+ while(button_read_device());
+ /* then wait until next button press */
+ while(!button_read_device());
}
void imx233_enable_interrupt(int src, bool enable)
@@ -177,3 +184,23 @@ void udelay(unsigned us)
while(!imx233_us_elapsed(ref, us));
}
+#ifdef HAVE_ADJUSTABLE_CPU_FREQ
+void set_cpu_frequency(long frequency)
+{
+ switch(frequency)
+ {
+ case IMX233_CPUFREQ_454_MHz:
+ /* clk_h@clk_p/3 */
+ imx233_set_clock_divisor(CLK_AHB, 3);
+ /* clk_p@ref_cpu/1*18/19 */
+ imx233_set_fractional_divisor(CLK_CPU, 19);
+ imx233_set_clock_divisor(CLK_CPU, 1);
+ /* ref_cpu@480 MHz
+ * clk_p@454.74 MHz
+ * clk_h@151.58 MHz */
+ break;
+ default:
+ break;
+ }
+}
+#endif
diff --git a/firmware/target/arm/imx233/system-target.h b/firmware/target/arm/imx233/system-target.h
index 163eacb41f..0f7bde4896 100644
--- a/firmware/target/arm/imx233/system-target.h
+++ b/firmware/target/arm/imx233/system-target.h
@@ -31,10 +31,35 @@
#define HW_DIGCTL_MICROSECONDS (*(volatile uint32_t *)(HW_DIGCTL_BASE + 0xC0))
#define HW_POWER_BASE 0x80044000
+
+#define HW_POWER_CTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x0))
+
+#define HW_POWER_5VCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x10))
+
+#define HW_POWER_MINPWR (*(volatile uint32_t *)(HW_POWER_BASE + 0x20))
+
+#define HW_POWER_CHARGE (*(volatile uint32_t *)(HW_POWER_BASE + 0x30))
+
+#define HW_POWER_VDDDCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x40))
+#define HW_POWER_VDDDCTRL__TRG_BP 0
+#define HW_POWER_VDDDCTRL__TRG_BM 0x1f
+#define HW_POWER_VDDDCTRL__TRG_STEP 25 /* mV */
+#define HW_POWER_VDDDCTRL__TRG_MIN 800 /* mV */
+
+#define HW_POWER_VDDACTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x50))
+
+#define HW_POWER_VDDIOCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x60))
+
+#define HW_POWER_VDDMEMCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x70))
+
+#define HW_POWER_MISC (*(volatile uint32_t *)(HW_POWER_BASE + 0x90))
+
#define HW_POWER_STS (*(volatile uint32_t *)(HW_POWER_BASE + 0xc0))
#define HW_POWER_STS__PSWITCH_BP 20
#define HW_POWER_STS__PSWITCH_BM (3 << 20)
+#define HW_POWER_BATTMONITOR (*(volatile uint32_t *)(HW_POWER_BASE + 0xe0))
+
#define HW_POWER_RESET (*(volatile uint32_t *)(HW_POWER_BASE + 0x100))
#define HW_POWER_RESET__UNLOCK 0x3E770000
#define HW_POWER_RESET__PWD 0x1
@@ -67,6 +92,22 @@
#define INT_SRC_LCDIF_ERROR 46
#define INT_SRC_NR_SOURCES 66
+/**
+ * Absolute maximum CPU speed: 454.74 MHz
+ * Intermediate CPU speeds: 392.73 MHz, 360MHz, 261.82 MHz, 64 MHz
+ * Absolute minimum CPU speed: 24 MHz */
+#define IMX233_CPUFREQ_454_MHz 454740000
+#define IMX233_CPUFREQ_392_MHz 392730000
+#define IMX233_CPUFREQ_360_MHz 360000000
+#define IMX233_CPUFREQ_261_MHz 261820000
+#define IMX233_CPUFREQ_64_MHz 64000000
+#define IMX233_CPUFREQ_24_MHz 24000000
+
+#define CPUFREQ_DEFAULT IMX233_CPUFREQ_454_MHz
+#define CPUFREQ_NORMAL IMX233_CPUFREQ_454_MHz
+#define CPUFREQ_MAX IMX233_CPUFREQ_454_MHz
+#define CPUFREQ_SLEEP IMX233_CPUFREQ_454_MHz
+
void imx233_enable_interrupt(int src, bool enable);
void imx233_softirq(int src, bool enable);
void udelay(unsigned us);
diff --git a/firmware/target/arm/imx233/usb-imx233.c b/firmware/target/arm/imx233/usb-imx233.c
index 83e50839b4..e3b540fd1e 100644
--- a/firmware/target/arm/imx233/usb-imx233.c
+++ b/firmware/target/arm/imx233/usb-imx233.c
@@ -48,7 +48,6 @@ void usb_drv_int_enable(bool enable)
void INT_USB_CTRL(void)
{
- printf("usb int");
usb_drv_int();
}