summaryrefslogtreecommitdiffstats
path: root/firmware/target/coldfire/iriver
diff options
context:
space:
mode:
authorJens Arnold <amiconn@rockbox.org>2006-10-29 13:48:57 +0000
committerJens Arnold <amiconn@rockbox.org>2006-10-29 13:48:57 +0000
commit85c9a05c56a290a0dd1686808d5bdb966d72f9a5 (patch)
tree4c05a7348210ed469e7ee0104f782c5e27378979 /firmware/target/coldfire/iriver
parentc4c4709d82e91f21283721eefcebe18182d901be (diff)
downloadrockbox-85c9a05c56a290a0dd1686808d5bdb966d72f9a5.tar.gz
rockbox-85c9a05c56a290a0dd1686808d5bdb966d72f9a5.zip
H300: Don't read the button ADC as long as no button is pressed, utilising the PCF50606 accessory detect feature. Ported from X5.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11383 a1c6a512-1295-4272-9138-f99709370657
Diffstat (limited to 'firmware/target/coldfire/iriver')
-rw-r--r--firmware/target/coldfire/iriver/button-target.h4
-rw-r--r--firmware/target/coldfire/iriver/h300/button-h300.c19
-rw-r--r--firmware/target/coldfire/iriver/h300/pcf50606-h300.c61
3 files changed, 80 insertions, 4 deletions
diff --git a/firmware/target/coldfire/iriver/button-target.h b/firmware/target/coldfire/iriver/button-target.h
index b89761b317..3d3247ab80 100644
--- a/firmware/target/coldfire/iriver/button-target.h
+++ b/firmware/target/coldfire/iriver/button-target.h
@@ -33,6 +33,10 @@ bool remote_button_hold(void);
bool remote_button_hold_only(void);
void button_init_device(void);
int button_read_device(void);
+#ifdef IRIVER_H300_SERIES
+void button_enable_scan(bool enable);
+bool button_scan_enabled(void);
+#endif
/* iRiver H100/H300 specific button codes */
diff --git a/firmware/target/coldfire/iriver/h300/button-h300.c b/firmware/target/coldfire/iriver/h300/button-h300.c
index 80210b6c19..bcd954df8a 100644
--- a/firmware/target/coldfire/iriver/h300/button-h300.c
+++ b/firmware/target/coldfire/iriver/h300/button-h300.c
@@ -27,9 +27,10 @@
#include "backlight.h"
#include "adc.h"
#include "system.h"
-#ifdef HAVE_REMOTE_LCD
#include "lcd-remote.h"
-#endif
+
+/* have buttons scan by default */
+static bool button_scan_on = true;
void button_init_device(void)
{
@@ -41,13 +42,23 @@ void button_init_device(void)
GPIO1_FUNCTION |= 0x00100062;
}
+void button_enable_scan(bool enable)
+{
+ button_scan_on = enable;
+}
+
+bool button_scan_enabled(void)
+{
+ return button_scan_on;
+}
+
bool button_hold(void)
{
return (GPIO1_READ & 0x00000002)?true:false;
}
bool remote_button_hold_only(void)
-{
+{
if(remote_type() == REMOTETYPE_H300_NONLCD)
return adc_scan(ADC_REMOTE)<0x0d; /* hold should be 0x00 */
else
@@ -88,7 +99,7 @@ int button_read_device(void)
backlight_hold_changed(hold_button);
#endif
- if (!hold_button)
+ if (button_scan_on && !hold_button)
{
data = adc_scan(ADC_BUTTONS);
diff --git a/firmware/target/coldfire/iriver/h300/pcf50606-h300.c b/firmware/target/coldfire/iriver/h300/pcf50606-h300.c
index c990f5ddcb..3a67d541d3 100644
--- a/firmware/target/coldfire/iriver/h300/pcf50606-h300.c
+++ b/firmware/target/coldfire/iriver/h300/pcf50606-h300.c
@@ -20,6 +20,7 @@
#include "system.h"
#include "kernel.h"
#include "pcf50606.h"
+#include "button-target.h"
/* These voltages were determined by measuring the output of the PCF50606
on a running H300, and verified by disassembling the original firmware */
@@ -37,10 +38,44 @@ static void set_voltages(void)
pcf50606_write_multiple(0x23, buf, 5);
}
+static void init_pmu_interrupts(void)
+{
+ /* inital data is interrupt masks */
+ unsigned char data[3] =
+ {
+ ~0x00,
+ ~0x00,
+ ~0x06, /* unmask ACDREM, ACDINS */
+ };
+
+ /* make sure GPI6 interrupt is off before unmasking anything */
+ and_l(~0x0f000000, &INTPRI5); /* INT38 - Priority 0 (Off) */
+
+ /* unmask the PMU interrupts we want to service */
+ pcf50606_write_multiple(0x05, data, 3);
+ /* clear INT1-3 as these are left set after standby */
+ pcf50606_read_multiple(0x02, data, 3);
+
+ /* Set to read pcf50606 INT but keep GPI6 off until init completes */
+ and_l(~0x00000040, &GPIO_ENABLE);
+ or_l(0x00000040, &GPIO_FUNCTION);
+ or_l(0x00004000, &GPIO_INT_EN); /* GPI6 H-L */
+}
+
+static inline void enable_pmu_interrupts(void)
+{
+ /* clear pending GPI6 interrupts first or it may miss the first
+ H-L transition */
+ or_l(0x00004000, &GPIO_INT_CLEAR);
+ or_l(0x03000000, &INTPRI5); /* INT38 - Priority 3 */
+}
+
void pcf50606_init(void)
{
pcf50606_i2c_init();
+ /* initialize pmu interrupts but don't service them yet */
+ init_pmu_interrupts();
set_voltages();
pcf50606_write(0x08, 0x60); /* Wake on USB and charger insertion */
@@ -49,4 +84,30 @@ void pcf50606_init(void)
pcf50606_write(0x35, 0x13); /* Backlight PWM = 512Hz 50/50 */
pcf50606_write(0x3a, 0x3b); /* PWM output on GPOOD1 */
+
+ pcf50606_write(0x33, 0x8c); /* Accessory detect: ACDAPE=1, THRSHLD=2.20V */
+
+ enable_pmu_interrupts(); /* allow GPI6 interrupts from PMU now */
+}
+
+/* PMU interrupt */
+void GPI6(void) __attribute__ ((interrupt_handler));
+void GPI6(void)
+{
+ unsigned char data[3]; /* 0 = INT1, 1 = INT2, 2 = INT3 */
+
+ /* Clear pending GPI6 interrupts */
+ or_l(0x00004000, &GPIO_INT_CLEAR);
+
+ /* clear pending interrupts from pcf50606 */
+ pcf50606_read_multiple(0x02, data, 3);
+
+ if (data[2] & 0x06)
+ {
+ /* ACDINS/ACDREM */
+ /* Check if the button driver should actually scan main buttons or not
+ - bias towards "yes" out of paranoia. */
+ button_enable_scan((data[2] & 0x02) != 0 ||
+ (pcf50606_read(0x33) & 0x01) != 0);
+ }
}