Archos: Moved the ata_address_detect() code into ata_device_init(), removing the associated #ifdef and some public #defines. Saves a tiny bit of code as well.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11812 a1c6a512-1295-4272-9138-f99709370657

2 files changed, 14 insertions, 17 deletions

diff --git a/firmware/target/sh/archos/ata-archos.c b/firmware/target/sh/archos/ata-archos.c
index 73e56b8d84..c685700fa3 100755
--- a/firmware/target/sh/archos/ata-archos.c
+++ b/firmware/target/sh/archos/ata-archos.c
@@ -25,6 +25,9 @@
 #include "ata-target.h"
 #include "hwcompat.h"
 
+#define ATA_CONTROL1    ((volatile unsigned char*)0x06200206)
+#define ATA_CONTROL2    ((volatile unsigned char*)0x06200306)
+
 volatile unsigned char* ata_control;
 int ata_io_address; /* 0x300 or 0x200 */
 
@@ -39,20 +42,6 @@ void ata_reset(void)
     sleep(1); /* > 2ms */
 }
 
-void ata_address_detect(void)
-{
-    if (read_hw_mask() & ATA_ADDRESS_200)
-    {
-        ata_io_address = 0x200; /* For debug purposes only */
-        ata_control = ATA_CONTROL1;
-    }
-    else
-    {
-        ata_io_address = 0x300; /* For debug purposes only */
-        ata_control = ATA_CONTROL2;
-    }
-}
-
 void ata_enable(bool on)
 {
     if(on)
@@ -68,6 +57,17 @@ void ata_device_init(void)
     or_b(0x02, &PAIORH); /* output for ATA reset */
     or_b(0x02, &PADRH);  /* release ATA reset */
     PACR2 &= 0xBFFF; /* GPIO function for PA7 (IDE enable) */
+ 
+    if (read_hw_mask() & ATA_ADDRESS_200)
+    {
+        ata_io_address = 0x200; /* For debug purposes only */
+        ata_control = ATA_CONTROL1;
+    }
+    else
+    {
+        ata_io_address = 0x300; /* For debug purposes only */
+        ata_control = ATA_CONTROL2;
+    }
 }
 
 bool ata_is_coldstart(void)
diff --git a/firmware/target/sh/archos/ata-target.h b/firmware/target/sh/archos/ata-target.h
index ddffb34f5a..ae9329387d 100755
--- a/firmware/target/sh/archos/ata-target.h
+++ b/firmware/target/sh/archos/ata-target.h
@@ -22,14 +22,11 @@
 /* asm optimised read & write loops */
 #define ATA_OPTIMIZED_READING
 #define ATA_OPTIMIZED_WRITING
-#define ATA_ADDRESS_DETECT /* need address detection */
 
 #define SWAP_WORDS
 
 #define ATA_IOBASE      0x06100100
 #define ATA_DATA        (*((volatile unsigned short*)0x06104100))
-#define ATA_CONTROL1    ((volatile unsigned char*)0x06200206)
-#define ATA_CONTROL2    ((volatile unsigned char*)0x06200306)
 #define ATA_CONTROL     (*ata_control)
 
 #define ATA_ERROR       (*((volatile unsigned char*)ATA_IOBASE + 1))