Philips SA9200. Add LCD features: enable, sleep, flip, contrast, and invert.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21583 a1c6a512-1295-4272-9138-f99709370657

3 files changed, 241 insertions, 25 deletions

diff --git a/firmware/target/arm/philips/sa9200/backlight-sa9200.c b/firmware/target/arm/philips/sa9200/backlight-sa9200.c
index 22aae1ae6b..0de4c05df5 100644
--- a/firmware/target/arm/philips/sa9200/backlight-sa9200.c
+++ b/firmware/target/arm/philips/sa9200/backlight-sa9200.c
@@ -25,6 +25,7 @@
 #include "ascodec.h"
 #include "as3514.h"
 #include "synaptics-mep.h"
+#include "lcd.h"
 
 void _backlight_set_brightness(int brightness)
 {
diff --git a/firmware/target/arm/philips/sa9200/lcd-sa9200.c b/firmware/target/arm/philips/sa9200/lcd-sa9200.c
index d7fe2e9c12..3937c078c6 100755
--- a/firmware/target/arm/philips/sa9200/lcd-sa9200.c
+++ b/firmware/target/arm/philips/sa9200/lcd-sa9200.c
@@ -24,6 +24,19 @@
 #include "kernel.h"
 #include "system.h"
 
+/* Settings to remember when display is turned off */
+static bool invert;
+static bool flip;
+static int  contrast;
+
+static bool power_on;
+static bool display_on;
+
+/* Forward declarations */
+#if defined(HAVE_LCD_ENABLE) || defined(HAVE_LCD_SLEEP)
+static void lcd_display_off(void);
+#endif
+
 /* The SA9200 controller closely matches the register defines for the
    Samsung S6D0151 */
 #define R_START_OSC             0x00
@@ -95,12 +108,11 @@ static void lcd_write_reg(unsigned reg, unsigned data)
     lcd_send_data(data);
 }
 
+/* LCD init */
 void lcd_init_device(void)
 {
 #if 0
-    /* This is the init done by the OF bootloader.
-       Re-initializing the lcd causes it to flash
-       a white screen, so for now disable this. */
+    /* This is done by the OF bootloader, no need to redo */
     DEV_INIT1 &= ~0x3000;
     DEV_INIT1 = DEV_INIT1;
     DEV_INIT2 &= ~0x400;
@@ -115,82 +127,272 @@ void lcd_init_device(void)
     LCD1_CONTROL &= ~0x800;
     LCD1_CONTROL &= ~0x400;
     udelay(30000);
+#endif
+
+    power_on = true;
+    display_on = true;
+    invert = false;
+    flip = false;
+    contrast = DEFAULT_CONTRAST_SETTING;
+}
 
+#ifdef HAVE_LCD_SLEEP
+static void lcd_power_on(void)
+{
     LCD1_CONTROL |= 0x1;
 
+    /** Power ON Sequence **/
+
+    /* Start Oscillation */
     lcd_write_reg(R_START_OSC, 0x0001);
-    udelay(50000);
+    
+    sleep(HZ/20); /* 50ms or more */
+
+    /* DSTB=0, SAP2-0=001, BT2-0=101, DC2-0=000, AP2-0=001, SLP=0, STB=0 */
+    lcd_write_reg(R_POWER_CONTROL1, 0x0d04);
 
+    /* VR1C=0, VRN14-10=10111, VRP14-10=11111 */
     lcd_write_reg(R_GAMMA_CONTROL1, 0x171f);
+
+    /* SVC3-0=0000, VRH5-4=01 */
     lcd_write_reg(R_POWER_CONTROL2, 0x0001);
-    lcd_write_reg(R_POWER_CONTROL3, 0x08cd);
-    lcd_write_reg(R_POWER_CONTROL4, 0x0416);
+
+    /* VCMR=1, PON=0, VRH3-0=1101 */
+    lcd_write_reg(R_POWER_CONTROL3, 0x080d);
+
+    /* VDV6-0=0000100, VCOMG=0, VCM6-0=xxxxxxx */
+    lcd_write_reg(R_POWER_CONTROL4, 0x0400 | contrast);
+
+    /* DSTB=0, SAP2-0=010, BT2-0=010, DC2-0=000, AP2-0=010, SLP=0, STB=0 */
     lcd_write_reg(R_POWER_CONTROL1, 0x1208);
-    udelay(50000);
 
+    sleep(HZ/20); /* 50ms or more */
+
+    /* VCMR=1, PON=1, VRH3-0=1100 */
     lcd_write_reg(R_POWER_CONTROL3, 0x081c);
-    udelay(200000);
 
-    lcd_write_reg(R_DRV_OUTPUT_CONTROL, 0x0a0c);
+    sleep(HZ/20); /* OF bootlaoder uses 200ms, no delay in OF firmware */
+
+    /* Instructions for other mode settings (in register order). */
+
+    lcd_write_reg(R_DRV_OUTPUT_CONTROL, flip ? 0x090c : 0x0a0c);
+
+    /* FL1-0=10, FDL=0 */
     lcd_write_reg(R_INVERSION_CONTROL, 0x0200);
+
+    /* BGR=1, MDT1-0=00, I/D1-0=11, AM=0 */
     lcd_write_reg(R_ENTRY_MODE, 0x1030);
+
+    /* PT1-0=00, SPT=0, GON=0, DTE=0, CL=0, REV=1, D1-0=01 */
     lcd_write_reg(R_DISP_CONTROL, 0x0005);
+
+    /* FP3-0=0011, BT3-0=1010 */
     lcd_write_reg(R_BLANK_PERIOD_CONTROL, 0x030a);
+
+    /* DIV1-0=00, RTN3-0=0000 */
     lcd_write_reg(R_FRAME_CYCLE_CONTROL, 0x0000);
+
+    /* RM=0, DM1-0=00, RIM1-0=00 */
     lcd_write_reg(R_EXT_INTERFACE_CONTROL, 0x0000);
 
+    /* PKP1=0x0, PKP0=0x0 */
     lcd_write_reg(R_GAMMA_FINE_ADJ_POS1, 0x0000);
+
+    /* PKP3=0x2, PKP2=0x4 */
     lcd_write_reg(R_GAMMA_FINE_ADJ_POS2, 0x0204);
+
+    /* PKP5=0x0, PKP4=0x1 */
     lcd_write_reg(R_GAMMA_FINE_ADJ_POS3, 0x0001);
+
+    /* PRP1=0x6, PRP0=0x0 */
     lcd_write_reg(R_GAMMA_GRAD_ADJ_POS, 0x0600);
+
+    /* PKN1=0x6, PKN0=0x7 */
     lcd_write_reg(R_GAMMA_FINE_ADJ_NEG1, 0x0607);
+
+    /* PKN3=0x3, PKN2=0x5 */
     lcd_write_reg(R_GAMMA_FINE_ADJ_NEG2, 0x0305);
+
+    /* PKN5=0x7, PKN4=0x7 */
     lcd_write_reg(R_GAMMA_FINE_ADJ_NEG3, 0x0707);
+
+    /* PRN1=0x0, PRN0=0x6 */
     lcd_write_reg(R_GAMMA_GRAD_ADJ_NEG, 0x0006);
+
+    /* VRN0=0x4, VRP=0x0 */
     lcd_write_reg(R_GAMMA_CONTROL3, 0x0400);
 
+    /* SCN=0x0 */
     lcd_write_reg(R_GATE_SCAN_START_POS, 0x0000);
+
+    /* SE1=LCD_HEIGHT-1, SS1=0x0 */
     lcd_write_reg(R_1ST_SCR_DRV_POS, 0x9f00);
+
+    /* SE2=0x0, SS2=0x0 */
     lcd_write_reg(R_2ND_SCR_DRV_POS, 0x0000);
+
+    /* HEA=LCD_WIDTH-1, HSA=0x0 */
     lcd_write_reg(R_HORIZ_RAM_ADDR_POS, 0x7f00);
+
+    /* VEA=LCD_HEIGHT-1, VSA=0x0 */
     lcd_write_reg(R_VERT_RAM_ADDR_POS, 0x9f00);
 
+    /* Unknown registers */
     lcd_write_reg(0x00a8, 0x0125);
     lcd_write_reg(0x00a9, 0x0014);
     lcd_write_reg(0x00a7, 0x0022);
 
+    power_on = true;
+}
+
+static void lcd_power_off(void)
+{
+    /* Display must be off first */
+    if (display_on)
+        lcd_display_off();
+
+    power_on = false;
+
+    /** Power OFF sequence **/
+
+    /* DSTB=0, SAP2-0=000, BT2-0=001, DC2-0=000, AP2-0=000, SLP=0, STB=0 */
+    lcd_write_reg(R_POWER_CONTROL1, 0x0100);
+
+    /* VCMR=1, PON=0, VRH3-0=1101 */
+    lcd_write_reg(R_POWER_CONTROL3, 0x080d);
+}
+
+void lcd_sleep(void)
+{
+    if (power_on)
+        lcd_power_off();
+
+    /* Set standby mode */
+
+    /* PT1-0=00, SPT=0, GON=1, DTE=1, CL=0, REV=1, D1-0=10 */
+    lcd_write_reg(R_DISP_CONTROL, 0x0036);
+
+    /* DSTB=0, SAP2-0=000, BT2-0=101, DC2-0=000, AP2-0=000, SLP=0, STB=1 */
+    lcd_write_reg(R_POWER_CONTROL1, 0x0501);
+
+    LCD1_CONTROL &= ~0xffff0001;
+}
+#endif
+
+#if defined(HAVE_LCD_ENABLE) || defined(HAVE_LCD_SLEEP)
+static void lcd_display_off(void)
+{
+    display_on = false;
+
+    /** Display OFF sequence **/
+
+    /* PT1-0=10, SPT=0, GON=1, DTE=1, CL=0, REV=1, D1-0=10 */
+    lcd_write_reg(R_DISP_CONTROL, 0x1036);
+
+    sleep(HZ/25); /* 2 or more frames */
+
+    /* PT1-0=10, SPT=0, GON=1, DTE=0, CL=0, REV=1, D1-0=00 */
+    lcd_write_reg(R_DISP_CONTROL, 0x1034);
+
+    sleep(HZ/500); /* 1ms or more */
+
+    /* PT1-0=10, SPT=0, GON=0, DTE=0, CL=0, REV=1, D1-0=00 */
+    lcd_write_reg(R_DISP_CONTROL, 0x1004);
+
+    sleep(HZ/25); /* 2 or more frames */
+}
+#endif
+
+#if defined(HAVE_LCD_ENABLE)
+static void lcd_display_on(void)
+{
+    /* Be sure power is on first */
+    if (!power_on)
+        lcd_power_on();
+
+    /** Display ON Sequence **/
+
+    /* PT1-0=00, SPT=0, GON=1, DTE=0, CL=0, REV=0, D1-0=01 */
     lcd_write_reg(R_DISP_CONTROL, 0x0021);
-    udelay(40000);
+
+    sleep(HZ/500); /* 1ms or more */
+
+    /* PT1-0=00, SPT=0, GON=1, DTE=0, CL=0, REV=0, D1-0=11 */
     lcd_write_reg(R_DISP_CONTROL, 0x0023);
-    udelay(40000);
-    lcd_write_reg(R_DISP_CONTROL, 0x1037);
 
-    lcd_write_reg(R_RAM_ADDR_SET, 0x0000);
+    sleep(HZ/25); /* 2 or more frames */
+
+    /* PT1-0=10, SPT=0, GON=1, DTE=1, CL=0, REV=x, D1-0=11 */
+    lcd_write_reg(R_DISP_CONTROL, invert ? 0x1033 : 0x1037);
+
+    display_on = true;
+}
+
+void lcd_enable(bool on)
+{
+    if (on == display_on)
+        return;
+
+    if (on)
+    {
+        lcd_display_on();
+        /* Probably out of sync and we don't wanna pepper the code with
+           lcd_update() calls for this. */
+        lcd_update();
+        lcd_activation_call_hook();
+    }
+    else
+    {
+        lcd_display_off();
+    }
+}
 #endif
+
+#if defined(HAVE_LCD_ENABLE) || defined(HAVE_LCD_SLEEP)
+bool lcd_active(void)
+{
+    return display_on;
 }
+#endif
 
 /*** hardware configuration ***/
-#if 0
 int lcd_default_contrast(void)
 {
     return DEFAULT_CONTRAST_SETTING;
 }
-#endif
 
 void lcd_set_contrast(int val)
 {
-    (void)val;
+    contrast = val & 0x7f;
+
+    if (!display_on)
+        return;
+
+    /* VDV6-0=0000100, VCOMG=0, VCM6-0=xxxxxxx */
+    lcd_write_reg(R_POWER_CONTROL4, 0x0400 | contrast);
 }
 
 void lcd_set_invert_display(bool yesno)
 {
-    (void)yesno;
+    invert = yesno;
+
+    if (!display_on)
+        return;
+
+    /* PT1-0=10, SPT=0, GON=1, DTE=1, CL=0, REV=x, D1-0=11 */
+    lcd_write_reg(R_DISP_CONTROL, invert ? 0x1033 : 0x1037);
 }
 
 /* turn the display upside down (call lcd_update() afterwards) */
 void lcd_set_flip(bool yesno)
 {
-    (void)yesno;
+    flip = yesno;
+
+    if (!display_on)
+        return;
+
+    /* DPL=0, EPL=1, SM=0, GS=x, SS=x, NL4-0=01100 */
+    lcd_write_reg(R_DRV_OUTPUT_CONTROL, flip ? 0x090c : 0x0a0c);
 }
 
 void lcd_yuv_set_options(unsigned options)
@@ -224,21 +426,27 @@ void lcd_update(void)
 void lcd_update_rect(int x, int y, int width, int height)
 {
     const fb_data *addr;
-    
-    if (x + width >= LCD_WIDTH)
+
+    if (!display_on)
+        return;
+
+    if (x + width > LCD_WIDTH)
         width = LCD_WIDTH - x;
-    if (y + height >= LCD_HEIGHT)
+
+    if (y + height > LCD_HEIGHT)
         height = LCD_HEIGHT - y;
-        
+
     if ((width <= 0) || (height <= 0))
         return; /* Nothing left to do. */
 
     addr = &lcd_framebuffer[y][x];
 
-    do {
-        lcd_write_reg(R_RAM_ADDR_SET, ((y++ & 0xff) << 8) | (x & 0xff));
-        lcd_send_command(R_WRITE_DATA_2_GRAM);
+    lcd_write_reg(R_HORIZ_RAM_ADDR_POS, ((x + width - 1) << 8) | x);
+    lcd_write_reg(R_VERT_RAM_ADDR_POS, ((y + height -1) << 8) | y);
+    lcd_write_reg(R_RAM_ADDR_SET, ((y & 0xff) << 8) | (x & 0xff));
+    lcd_send_command(R_WRITE_DATA_2_GRAM);
 
+    do {
         int w = width;
         do {
             lcd_send_data(*addr++);
diff --git a/firmware/target/arm/philips/sa9200/power-sa9200.c b/firmware/target/arm/philips/sa9200/power-sa9200.c
index e0bdfcf8ea..236dd72a72 100644
--- a/firmware/target/arm/philips/sa9200/power-sa9200.c
+++ b/firmware/target/arm/philips/sa9200/power-sa9200.c
@@ -26,6 +26,7 @@
 #include "as3514.h"
 #include "power.h"
 #include "synaptics-mep.h"
+#include "lcd.h"
 #include "logf.h"
 
 void power_init(void)
@@ -72,6 +73,12 @@ void power_off(void)
 {
     char byte;
 
+    /* Backlight off */
+    ascodec_write(AS3514_DCDC15, 0);
+
+    /* LCD off/sleep (otherwise the image slowly fades out) */
+    lcd_sleep();
+
     /* Send shutdown command to PMU */
     byte = ascodec_read(AS3514_SYSTEM);
     byte &= ~0x1;