summaryrefslogtreecommitdiffstats
path: root/firmware/target
diff options
context:
space:
mode:
authorRafaël Carré <rafael.carre@gmail.com>2010-02-21 22:49:53 +0000
committerRafaël Carré <rafael.carre@gmail.com>2010-02-21 22:49:53 +0000
commitc6af5c962d04e482dddb3693c7f9ed73f638a5ea (patch)
tree4e0b20a8fa7b72f3bb6d203b145d894046a84ef4 /firmware/target
parent4832c3ce420d25e129e6d66dfa35951a9fddc560 (diff)
downloadrockbox-c6af5c962d04e482dddb3693c7f9ed73f638a5ea.tar.gz
rockbox-c6af5c962d04e482dddb3693c7f9ed73f638a5ea.zip
sd-as3525v2: describe interrupt mask bits
Reset DMA before transfers and check data transfer over bit in isr Still no error or data transfer over conditions Read the correct status register in isr : there is a masked interrupt status register and a general status register git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24836 a1c6a512-1295-4272-9138-f99709370657
Diffstat (limited to 'firmware/target')
-rw-r--r--firmware/target/arm/as3525/sd-as3525v2.c105
1 files changed, 28 insertions, 77 deletions
diff --git a/firmware/target/arm/as3525/sd-as3525v2.c b/firmware/target/arm/as3525/sd-as3525v2.c
index 27c73720b6..477f61e1a8 100644
--- a/firmware/target/arm/as3525/sd-as3525v2.c
+++ b/firmware/target/arm/as3525/sd-as3525v2.c
@@ -140,24 +140,27 @@ static void printf(const char *format, ...)
*/
/* interrupt bits */
-#define MCI_INT_CRDDET (1<<0)
-#define MCI_INT_RE (1<<1)
-#define MCI_INT_CD (1<<2)
-#define MCI_INT_DTO (1<<3)
-#define MCI_INT_TXDR (1<<4)
-#define MCI_INT_RXDR (1<<5)
-#define MCI_INT_RCRC (1<<6)
-#define MCI_INT_DCRC (1<<7)
-#define MCI_INT_RTO (1<<8)
-#define MCI_INT_DRTO (1<<9)
-#define MCI_INT_HTO (1<<10)
-#define MCI_INT_FRUN (1<<11)
-#define MCI_INT_HLE (1<<12)
-#define MCI_INT_SBE (1<<13)
-#define MCI_INT_ACD (1<<14)
-#define MCI_INT_EBE (1<<15)
+#define MCI_INT_CRDDET (1<<0) /* card detect */
+#define MCI_INT_RE (1<<1) /* response error */
+#define MCI_INT_CD (1<<2) /* command done */
+#define MCI_INT_DTO (1<<3) /* data transfer over */
+#define MCI_INT_TXDR (1<<4) /* tx fifo data request */
+#define MCI_INT_RXDR (1<<5) /* rx fifo data request */
+#define MCI_INT_RCRC (1<<6) /* response crc error */
+#define MCI_INT_DCRC (1<<7) /* data crc error */
+#define MCI_INT_RTO (1<<8) /* response timeout */
+#define MCI_INT_DRTO (1<<9) /* data read timeout */
+#define MCI_INT_HTO (1<<10) /* data starv timeout */
+#define MCI_INT_FRUN (1<<11) /* fifo over/underrun */
+#define MCI_INT_HLE (1<<12) /* hw locked while error */
+#define MCI_INT_SBE (1<<13) /* start bit error */
+#define MCI_INT_ACD (1<<14) /* auto command done */
+#define MCI_INT_EBE (1<<15) /* end bit error */
#define MCI_INT_SDIO (0xf<<16)
+#define MCI_ERROR (MCI_INT_RE | MCI_INT_RCRC | MCI_INT_DCRC | MCI_INT_RTO \
+ | MCI_INT_DRTO | MCI_INT_HTO | MCI_INT_FRUN | MCI_INT_HLE \
+ | MCI_INT_SBE | MCI_INT_EBE)
#define MCI_FIFOTH SD_REG(0x4C) /* FIFO threshold */
/* TX watermark : bits 11:0
@@ -188,8 +191,6 @@ static void printf(const char *format, ...)
#define MCI_DSCADDR SD_REG(0x94) /* current host descriptor address */
#define MCI_BUFADDR SD_REG(0x98) /* current host buffer address */
-#define MCI_ERROR 0 /* FIXME */
-
#define MCI_FIFO ((unsigned long *) (SD_BASE+0x100))
static int sd_init_card(void);
@@ -218,61 +219,15 @@ static inline void mci_delay(void) { int i = 0xffff; while(i--) ; }
void INT_NAND(void)
{
- MCI_CTRL &= INT_ENABLE;
- const int status = MCI_STATUS;
+ MCI_CTRL &= ~INT_ENABLE;
+ const int status = MCI_MASK_STATUS;
+
+ MCI_RAW_STATUS = status; /* clear status */
-#if 0
if(status & MCI_ERROR)
retry = true;
-#endif
-
-// wakeup_signal(&transfer_completion_signal);
- MCI_RAW_STATUS = status;
-
- //static int x = 0;
- switch(status)
- {
- case 0x4: /* cmd received ? = MCI_INT_CDMCI_INT_CD */
-
- case 0x104: /* ? 1 time in init (10th interrupt)
- * = MCI_INT_CD | MCI_INT_RTO */
-
- case 0x2000: /* ? after cmd read_mul_blocks | 0x2200
- * = MCI_INT_SBE */
-
- case 0x820: /* ? 1 time while copy from FIFO (not DMA)
- * = MCI_INT_RXDR | MCI_INT_FRUN */
-
- case 0x20: /* ? rx fifo empty = MCI_INT_RXDR */
- break;
-#if 0
- default:
- printf("%2d NAND 0x%x", ++x, status);
- int delay = 0x100000; while(delay--) ;
-#endif
- }
- /*
- * MCI_STATUS =
- * 0x106 = MCI_INT_RE | MCI_INT_CD | MCI_INT_RTO
- * 0x4106 |= MCI_INT_ACD
- * 1B906 = MCI_INT_RE | MCI_INT_CD | MCI_INT_RTO | MCI_INT_FRUN
- * | MCI_INT_HLE | MCI_INT_SBE | MCI_INT_EBE
- * 1F906 |= MCI_INT_ACD
- * 1B906
- * 1F906
- * 1F906
- * 1906
- * ...
- * 6906 = MCI_INT_RE | MCI_INT_CD | MCI_INT_RTO | MCI_INT_FRUN |
- * MCI_INT_SBE | MCI_INT_ACD
- * 6D06 (dma) |= MCI_INT_HTO
- *
- * read resp (6, 7, 12, 42) : while bit 9 is unset ;
- *
- */
- //printf("%x %x", status, MCI_STATUS);
- //while(!button_read_device());
- //while(button_read_device());
+ else if(status & MCI_INT_DTO)
+ wakeup_signal(&transfer_completion_signal);
MCI_CTRL |= INT_ENABLE;
}
@@ -658,15 +613,11 @@ static int sd_transfer_sectors(unsigned long start, int count, void* buf, bool w
do
{
- MCI_CTRL |= FIFO_RESET;
- while(MCI_CTRL & FIFO_RESET)
- ;
-
- //MCI_BLKSIZ = 512;
+ MCI_BLKSIZ = 512;
MCI_BYTCNT = count * 512;
- MCI_CTRL |= FIFO_RESET;
- while(MCI_CTRL & FIFO_RESET)
+ MCI_CTRL |= (FIFO_RESET|DMA_RESET);
+ while(MCI_CTRL & (FIFO_RESET|DMA_RESET))
;
MCI_CTRL |= DMA_ENABLE;