Make the measured LCD scanrates from the greylib known to the scanrate test plugin.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16938 a1c6a512-1295-4272-9138-f99709370657

4 files changed, 44 insertions, 76 deletions

diff --git a/firmware/export/config-player.h b/firmware/export/config-player.h
index 94d5edf451..26a643f152 100644
--- a/firmware/export/config-player.h
+++ b/firmware/export/config-player.h
@@ -49,7 +49,7 @@
 
 /* Uncomment this if you want to enable ATA power-off control.
  * Attention, some players crash when ATA power-off is enabled! */
-//#define HAVE_ATA_POWER_OFF
+#define HAVE_ATA_POWER_OFF
 
 /* Define this if you control ata power player style
    (with PB4, new player only) */
diff --git a/firmware/export/id3.h b/firmware/export/id3.h
index 8b2d02ea30..3145ee7225 100644
--- a/firmware/export/id3.h
+++ b/firmware/export/id3.h
@@ -49,6 +49,7 @@ enum
     AFMT_WAVPACK,      /* WavPack */
     AFMT_ALAC,         /* Apple Lossless Audio Codec */
     AFMT_AAC,          /* Advanced Audio Coding (AAC) in M4A container */
+    AFMT_MOD,          /* MOD File Format */
     AFMT_SHN,          /* Shorten */
     AFMT_SID,          /* SID File Format */
     AFMT_ADX,          /* ADX File Format */
diff --git a/firmware/id3.c b/firmware/id3.c
index d63acbb8aa..c750fff521 100644
--- a/firmware/id3.c
+++ b/firmware/id3.c
@@ -90,6 +90,9 @@ const struct afmt_entry audio_formats[AFMT_NUM_CODECS] =
     [AFMT_AAC] =
         AFMT_ENTRY("AAC",  "aac",     NULL,          "mp4\0"      ),
     /* Shorten */
+    [AFMT_MOD] =
+        AFMT_ENTRY("MOD",  "mod",     NULL,          "mod\0"      ),
+    /* Shorten */
     [AFMT_SHN] =
         AFMT_ENTRY("SHN",  "shorten", NULL,          "shn\0"      ),
     /* SID File Format */
diff --git a/firmware/target/arm/iriver/h10/lcd-h10_5gb.c b/firmware/target/arm/iriver/h10/lcd-h10_5gb.c
index 5b022e09c5..669654f5c3 100644
--- a/firmware/target/arm/iriver/h10/lcd-h10_5gb.c
+++ b/firmware/target/arm/iriver/h10/lcd-h10_5gb.c
@@ -108,6 +108,7 @@ void lcd_init_device(void)
 {  
     CLCD_CLOCK_SRC |= 0xc0000000; /* Set LCD interface clock to PLL */
     /* H10 LCD is initialised by the bootloader */
+    lcd_write_reg(R_ENTRY_MODE, 0x1030); /* BGR =1, ID1 = 1, ID0 = 1 */
 }
 
 /*** update functions ***/
@@ -275,88 +276,51 @@ void lcd_blit_yuv(unsigned char * const src[3],
 
 
 /* Update a fraction of the display. */
-void lcd_update_rect(int x0, int y0, int width, int height)
+void lcd_update_rect(int x, int y, int width, int height)
 {
-    int x1, y1;
-    int newx,newwidth;
-    unsigned long *addr;
+    const fb_data *addr;
+    int bytes_to_write;
+    
+    if (x + width >= LCD_WIDTH)
+        width = LCD_WIDTH - x;
+    if (y + height >= LCD_HEIGHT)
+        height = LCD_HEIGHT - y;
+        
+    if ((width <= 0) || (height <= 0))
+        return; /* Nothing left to do. 0 would hang the transfer. */
+        
+    /* Ensure x and width are both even, so we can read
+     * 32-bit aligned data from the framebuffer */
+    width = (width + (x & 1) + 1) & ~1;
+    x &= ~1;
+
+    lcd_write_reg(R_VERT_RAM_ADDR_POS, (LCD_HEIGHT-1) << 8);
+    lcd_write_reg(R_HORIZ_RAM_ADDR_POS, ((x + width - 1) << 8) | x);
+    lcd_write_reg(R_RAM_ADDR_SET, (y << 8) | x);
 
-    /* Ensure x and width are both even - so we can read 32-bit aligned 
-       data from lcd_framebuffer */
-    newx=x0&~1;
-    newwidth=width&~1;
-    if (newx+newwidth < x0+width) { newwidth+=2; }
-    x0=newx; width=newwidth;
-
-    /* calculate the drawing region */
-    y1 = (y0 + height) - 1;           /* max vert */
-    x1 = (x0 + width) - 1;          /* max horiz */
-
-
-    /* swap max horiz < start horiz */
-    if (y1 < y0) {
-        int t;
-        t = y0;
-        y0 = y1;
-        y1 = t;
-    }
-
-    /* swap max vert < start vert */
-    if (x1 < x0) {
-        int t;
-        t = x0;
-        x0 = x1;
-        x1 = t;
-    }
-
-    /* max horiz << 8 | start horiz */
-    lcd_write_reg(R_HORIZ_RAM_ADDR_POS, (x1 << 8) | x0);
-
-    /* max vert << 8 | start vert */
-    lcd_write_reg(R_VERT_RAM_ADDR_POS, (y1 << 8) | y0);
-
-    /* start vert << 8 | start horiz */
-    lcd_write_reg(R_RAM_ADDR_SET, (y0 << 8) | x0);
-
-    /* start drawing */
     lcd_send_cmd(R_WRITE_DATA_2_GRAM);
 
-    addr = (unsigned long*)&lcd_framebuffer[y0][x0];
-
-    while (height > 0) {
-        int c, r;
-        int h, pixels_to_write;
-
-        pixels_to_write = (width * height) * 2;
-        h = height;
-
-        /* calculate how much we can do in one go */
-        if (pixels_to_write > 0x10000) {
-            h = (0x10000/2) / width;
-            pixels_to_write = (width * h) * 2;
-        }
-
-        LCD2_BLOCK_CTRL = 0x10000080;
-        LCD2_BLOCK_CONFIG = 0xc0010000 | (pixels_to_write - 1);
-        LCD2_BLOCK_CTRL = 0x34000000;
+    addr = &lcd_framebuffer[y][x];
+    bytes_to_write = width * height * sizeof(fb_data);  
+    /* must be <= 0x10000, but that's guaranteed on H10. */
 
-        /* for each row */
-        for (r = 0; r < h; r++) {
-            /* for each column */
-            for (c = 0; c < width; c += 2) {
-                while (!(LCD2_BLOCK_CTRL & LCD2_BLOCK_TXOK));
-
-                /* output 2 pixels */
-                LCD2_BLOCK_DATA = *addr++;
-            }
-            addr += (LCD_WIDTH - width)/2;
+    LCD2_BLOCK_CTRL   = 0x10000080;
+    LCD2_BLOCK_CONFIG = 0xc0010000 | (bytes_to_write - 1);
+    LCD2_BLOCK_CTRL   = 0x34000000;
+    
+    do
+    {
+        int w = width >> 1;
+        do
+        {
+            while (!(LCD2_BLOCK_CTRL & LCD2_BLOCK_TXOK));
+            LCD2_BLOCK_DATA = *(unsigned long*)addr;  /* output 2 pixels */
+            addr += 2;
         }
-
-        while (!(LCD2_BLOCK_CTRL & LCD2_BLOCK_READY));
-        LCD2_BLOCK_CONFIG = 0;
-
-        height -= h;
+        while (--w > 0);
+        addr += LCD_WIDTH - width;
     }
+    while (--height > 0);
 }
 
 /* Update the display.