Make Clip+ bootloader build

Now making the Fuzev2 bootloader build should be pretty easy

TODO:
    - write button driver (FlynDice found all buttons already)
    - find button light
    - decide if lcd-ssd1303.c must be modified for Clip+ using SSP or forked
    - check if backlight code works (I copied Clipv2 code)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24520 a1c6a512-1295-4272-9138-f99709370657

11 files changed, 418 insertions, 10 deletions

diff --git a/firmware/SOURCES b/firmware/SOURCES
index 768ab49acb..eb3e88fd8b 100644
--- a/firmware/SOURCES
+++ b/firmware/SOURCES
@@ -1204,6 +1204,19 @@ target/arm/tcc77x/c100/audio-c100.c
 #endif /* SIMULATOR */
 #endif /* SANSA_C100 */
 
+#ifdef SANSA_CLIPPLUS
+#ifndef SIMULATOR
+target/arm/as3525/sansa-clip/lcd-ssd1303.c      /* FIXME */
+target/arm/as3525/sansa-clip/lcd-as-clip.S
+target/arm/as3525/sansa-clipplus/button-clip.c
+target/arm/as3525/sansa-clipplus/backlight-clip.c
+#ifndef BOOTLOADER
+target/arm/powermgmt-ascodec.c
+target/arm/as3525/sansa-clip/powermgmt-clip.c
+#endif /* !BOOTLOADER */
+#endif /* !SIMULATOR */
+#endif /* SANSA_CLIPV2 */
+
 #ifdef SANSA_CLIPV2
 #ifndef SIMULATOR
 target/arm/as3525/sansa-clip/lcd-ssd1303.c
diff --git a/firmware/export/config.h b/firmware/export/config.h
index 96fec57d7b..516161191b 100644
--- a/firmware/export/config.h
+++ b/firmware/export/config.h
@@ -384,6 +384,8 @@ Lyre prototype 1 */
 #include "config/sansaclip.h"
 #elif defined(SANSA_CLIPV2)
 #include "config/sansaclipv2.h"
+#elif defined(SANSA_CLIPPLUS)
+#include "config/sansaclipplus.h"
 #elif defined(SANSA_E200V2)
 #include "config/sansae200v2.h"
 #elif defined(SANSA_M200V4)
diff --git a/firmware/export/config/sansaclipplus.h b/firmware/export/config/sansaclipplus.h
new file mode 100644
index 0000000000..758f2679d0
--- /dev/null
+++ b/firmware/export/config/sansaclipplus.h
@@ -0,0 +1,215 @@
+/*
+ * This config file is for the Sandisk Sansa Clip+
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 68
+#define MODEL_NAME   "Sandisk Sansa Clip+"
+#define FIRMWARE_OFFSET_FILE_DATA 8
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+#if 0 /* disabled since there is no driver (yet) */
+
+#define HW_SAMPR_CAPS       (SAMPR_CAP_44)
+
+/* define this if you have recording possibility */
+#define HAVE_RECORDING
+
+#define REC_SAMPR_CAPS      (SAMPR_CAP_22)
+#define REC_FREQ_DEFAULT    REC_FREQ_22 /* Default is not 44.1kHz */
+#define REC_SAMPR_DEFAULT   SAMPR_22
+
+#endif
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+   explicitly if different */
+#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a light associated with the buttons */
+#define HAVE_BUTTON_LIGHT
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* LCD dimensions */
+#define LCD_WIDTH  128
+#define LCD_HEIGHT 64
+#define LCD_DEPTH  1
+
+#define LCD_PIXELFORMAT VERTICAL_PACKING
+#define HAVE_NEGATIVE_LCD /* bright on dark */
+#define HAVE_LCD_SPLIT    /* split display */
+
+/* Display colours, for screenshots and sim (0xRRGGBB) */
+#define LCD_DARKCOLOR        0x000000
+#define LCD_BRIGHTCOLOR      0x000000
+#define LCD_BL_DARKCOLOR     0x000000
+#define LCD_BL_BRIGHTCOLOR   0x0de2e5
+
+#define LCD_DARKCOLOR_2       0x000000
+#define LCD_BRIGHTCOLOR_2     0x000000
+#define LCD_BL_DARKCOLOR_2    0x000000
+#define LCD_BL_BRIGHTCOLOR_2  0xffe60f
+
+#define LCD_SPLIT_POS    16
+#define LCD_SPLIT_LINES  2
+
+/* define this if you have LCD enable function */
+#define HAVE_LCD_ENABLE
+
+#ifndef BOOTLOADER
+/* Define this if your LCD can be put to sleep.
+ * HAVE_LCD_ENABLE should be defined as well. */
+//#define HAVE_LCD_SLEEP
+//#define HAVE_LCD_SLEEP_SETTING
+#endif
+
+/* define this if you can flip your LCD */
+#define HAVE_LCD_FLIP
+
+/* define this if you can invert the pixels */
+#define HAVE_LCD_INVERT
+
+/* Define this if your LCD can set contrast */
+#define HAVE_LCD_CONTRAST
+
+#define MIN_CONTRAST_SETTING        0
+#define MAX_CONTRAST_SETTING        50
+#define DEFAULT_CONTRAST_SETTING    30
+
+#define IRAM_LCDFRAMEBUFFER IDATA_ATTR /* put the lcd frame buffer in IRAM */
+
+#define CONFIG_KEYPAD SANSA_CLIP_PAD
+
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+/* There is no hardware tone control */
+#define HAVE_SW_TONE_CONTROLS
+
+/* We're working on the assumption that the AS3525 has something
+   similar to the AS3514 for audio codec etc */
+#define HAVE_AS3514
+
+/* define this if you have a real-time clock */
+#ifndef BOOTLOADER
+#define CONFIG_RTC RTC_AS3514
+#endif
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+#define HAVE_FAT16SUPPORT
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+#define AB_REPEAT_ENABLE 1
+
+/* FM Tuner */
+#define CONFIG_TUNER SI4700 /* in fact SI4702 */
+//#define HAVE_TUNER_PWR_CTRL
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+
+/* define this if you have a flash memory storage */
+#define HAVE_FLASH_STORAGE
+
+/* define this if the flash memory uses the SecureDigital Memory Card protocol */
+#define CONFIG_STORAGE STORAGE_SD
+
+#define BATTERY_CAPACITY_DEFAULT 380    /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 380        /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 380        /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 0          /* capacity increment */
+#define BATTERY_TYPES_COUNT  1          /* only one type */
+
+/* Charging implemented in a target-specific algorithm */
+#define CONFIG_CHARGING CHARGING_TARGET
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+/** Non-simulator section **/
+#ifndef SIMULATOR
+
+/* Define this if you have a AMS AS3525v2 SoC */
+#define CONFIG_CPU AS3525v2
+
+/* Define this if you want to use the AS3525 i2c interface */
+#define CONFIG_I2C I2C_AS3525   /* FIXME : looks similar to AS353x interface */
+
+/* define this if the hardware can be powered off while charging */
+/* Sansa can't be powered off while charging */
+/* #define HAVE_POWEROFF_WHILE_CHARGING */
+
+/* The start address index for ROM builds */
+#define ROM_START 0x00000000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ      250000000
+
+/* Type of LCD */
+#define CONFIG_LCD LCD_SSD1303
+
+#ifndef BOOTLOADER
+
+#define USB_HANDLED_BY_OF
+
+#if 0 /* disabled since there is no USB driver */
+
+/* USB On-the-go */
+#define CONFIG_USBOTG USBOTG_ARC
+
+/* enable these for the experimental usb stack */
+#define HAVE_USBSTACK
+#define USB_VENDOR_ID 0x0781
+#define USB_PRODUCT_ID 0x7433
+#endif /* BOOTLOADER */
+
+#endif
+
+
+/* Virtual LED (icon) */
+#define CONFIG_LED LED_VIRTUAL
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define BOOTFILE_EXT    "sansa"
+#define BOOTFILE        "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#define ICODE_ATTR_TREMOR_NOT_MDCT
+
+#define INCLUDE_TIMEOUT_API
+
+#endif /* SIMULATOR */
+
+/** Port-specific settings **/
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING      1
+#define MAX_BRIGHTNESS_SETTING     12
+#define DEFAULT_BRIGHTNESS_SETTING  6
+
+/* Default recording levels */
+#define DEFAULT_REC_MIC_GAIN    23
+#define DEFAULT_REC_LEFT_GAIN   23
+#define DEFAULT_REC_RIGHT_GAIN  23
diff --git a/firmware/target/arm/as3525/boot.lds b/firmware/target/arm/as3525/boot.lds
index dcc291b54f..5bf75be789 100644
--- a/firmware/target/arm/as3525/boot.lds
+++ b/firmware/target/arm/as3525/boot.lds
@@ -6,7 +6,7 @@ OUTPUT_FORMAT(elf32-littlearm)
 OUTPUT_ARCH(arm)
 STARTUP(target/arm/crt0.o)
 
-#ifdef SANSA_CLIPV2
+#if CONFIG_CPU == AS3525v2
 #define RAMORIG 0x0             /* DRAM */
 #define RAMSIZE (MEM*0x100000)
 #else
diff --git a/firmware/target/arm/as3525/clock-target.h b/firmware/target/arm/as3525/clock-target.h
index fd3a1c7bf4..16f28429b8 100644
--- a/firmware/target/arm/as3525/clock-target.h
+++ b/firmware/target/arm/as3525/clock-target.h
@@ -56,7 +56,7 @@
 #define AS3525_CLK_FCLK           3         /* Available as PCLK input only  */
 
 /** ************ Change these to reconfigure clocking scheme *******************/
-#ifdef SANSA_CLIPV2
+#if CONFIG_CPU == AS3525v2
 
 /* PLL* registers differ from AS3525 */
 #define AS3525_PLLA_FREQ        240000000
@@ -74,7 +74,7 @@
 #define AS3525_PLLB_FREQ        384000000   /* allows 44.1kHz with 0.04% error*/
 #define AS3525_PLLB_SETTING     0x2630
 
-#endif  /* SANSA_CLIPV2 */
+#endif  /* CONFIG_CPU == AS3525v2 */
 
 //#define AS3525_PLLA_FREQ        384000000 /*192,128,96,76.8,64,54.9,48,42.7,38.4*/
        /* FCLK_PREDIV->  *7/8 = 336MHz      168, 112, 84, 67.2, 56, 48, 42, 37.3*/
@@ -142,12 +142,12 @@
 #define AS3525_IDE_SEL           AS3525_CLK_PLLA           /* Input Source   */
 #define AS3525_IDE_DIV           (CLK_DIV(AS3525_PLLA_FREQ, AS3525_IDE_FREQ) - 1)/*div=1/(n+1)*/
 
-#ifdef SANSA_CLIPV2
+#if CONFIG_CPU == AS3525v2
 #define AS3525_MS_FREQ          120000000
 #define AS3525_IDE_FREQ          80000000
 #else
 #define AS3525_IDE_FREQ          50000000    /* The OF uses 66MHz maximal freq */
-#endif /* SANSA_CLIPV2 */
+#endif /* CONFIG_CPU == AS3525v2 */
 
 
 //#define AS3525_USB_SEL           AS3525_CLK_PLLA            /* Input Source   */
diff --git a/firmware/target/arm/as3525/powermgmt-target.h b/firmware/target/arm/as3525/powermgmt-target.h
index 159a051e70..3e9cdad243 100644
--- a/firmware/target/arm/as3525/powermgmt-target.h
+++ b/firmware/target/arm/as3525/powermgmt-target.h
@@ -22,7 +22,9 @@
 #ifndef POWERMGMT_TARGET_H
 #define POWERMGMT_TARGET_H
 
-#if defined(SANSA_CLIP) || defined(SANSA_CLIPV2)
+#if defined(SANSA_CLIP) \
+    || defined(SANSA_CLIPV2)    /* FIXME */ \
+    || defined(SANSA_CLIPPLUS)  /* FIXME */
 
 /* Check if topped-off and monitor voltage while plugged. */
 #define BATT_FULL_VOLTAGE   4160
diff --git a/firmware/target/arm/as3525/sansa-clipplus/backlight-clip.c b/firmware/target/arm/as3525/sansa-clipplus/backlight-clip.c
new file mode 100644
index 0000000000..c51d61231d
--- /dev/null
+++ b/firmware/target/arm/as3525/sansa-clipplus/backlight-clip.c
@@ -0,0 +1,53 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright © 2009 Rafaël Carré
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include "backlight-target.h"
+#include "lcd.h"
+#include "as3525v2.h"
+#include "ascodec-target.h"
+
+/* FIXME : this is clipv2 code, not sure if it works the same on clip+ */
+
+void _backlight_on(void)
+{
+    ascodec_write(0x25, ascodec_read(0x25) | 2);    /* lcd power */
+    ascodec_write(0x1c, 8|1);
+    ascodec_write(0x1b, 0x90);
+    lcd_enable(true);
+}
+
+void _backlight_off(void)
+{
+    ascodec_write(0x25, ascodec_read(0x25) & ~2);    /* lcd power */
+    lcd_enable(false);
+}
+
+void _buttonlight_on(void)
+{
+    GPIOA_DIR |= (1<<5);
+    GPIOA_PIN(5) = (1<<5);  /* set pin a5 high */
+}
+
+void _buttonlight_off(void)
+{
+    GPIOA_DIR |= (1<<5);
+    GPIOA_PIN(5) = 0;       /* set pin a5 low */
+}
diff --git a/firmware/target/arm/as3525/sansa-clipplus/backlight-target.h b/firmware/target/arm/as3525/sansa-clipplus/backlight-target.h
new file mode 100644
index 0000000000..d202408356
--- /dev/null
+++ b/firmware/target/arm/as3525/sansa-clipplus/backlight-target.h
@@ -0,0 +1,32 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright © 2009 Rafaël Carré
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef BACKLIGHT_TARGET_H
+#define BACKLIGHT_TARGET_H
+
+#define _backlight_init() true
+
+void _backlight_on(void);
+void _backlight_off(void);
+
+void _buttonlight_on(void);
+void _buttonlight_off(void);
+
+#endif
diff --git a/firmware/target/arm/as3525/sansa-clipplus/button-clip.c b/firmware/target/arm/as3525/sansa-clipplus/button-clip.c
new file mode 100644
index 0000000000..52917cca6f
--- /dev/null
+++ b/firmware/target/arm/as3525/sansa-clipplus/button-clip.c
@@ -0,0 +1,33 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 François Dinel
+ * Copyright ©   2008-2009 Rafaël Carré
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include "button-target.h"
+#include "as3525v2.h"
+#include "kernel.h"
+
+void button_init_device(void)
+{
+}
+
+int button_read_device(void)
+{
+    return 0;
+}
diff --git a/firmware/target/arm/as3525/sansa-clipplus/button-target.h b/firmware/target/arm/as3525/sansa-clipplus/button-target.h
new file mode 100644
index 0000000000..69f5d984ba
--- /dev/null
+++ b/firmware/target/arm/as3525/sansa-clipplus/button-target.h
@@ -0,0 +1,57 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 François Dinel
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#ifndef _BUTTON_TARGET_H_
+#define _BUTTON_TARGET_H_
+
+#include <stdbool.h>
+#include "config.h"
+
+void button_init_device(void);
+int button_read_device(void);
+bool button_hold(void);
+
+/* Main unit's buttons */
+#define BUTTON_HOME         0x00000001
+
+#define BUTTON_VOL_UP       0x00000002
+#define BUTTON_VOL_DOWN     0x00000004
+
+#define BUTTON_UP           0x00000008
+#define BUTTON_DOWN         0x00000010
+#define BUTTON_LEFT         0x00000020
+#define BUTTON_RIGHT        0x00000040
+
+#define BUTTON_SELECT       0x00000080
+
+#define BUTTON_POWER        0x00000100
+
+#define BUTTON_MAIN (BUTTON_HOME|BUTTON_VOL_UP|BUTTON_VOL_DOWN\
+                    |BUTTON_UP|BUTTON_DOWN|BUTTON_LEFT|BUTTON_RIGHT\
+                    |BUTTON_SELECT|BUTTON_POWER)
+
+#define BUTTON_REMOTE 0
+
+/* Software power-off */
+#define POWEROFF_BUTTON BUTTON_POWER
+#define POWEROFF_COUNT 10
+
+#endif /* _BUTTON_TARGET_H_ */
diff --git a/firmware/target/arm/as3525/system-as3525.c b/firmware/target/arm/as3525/system-as3525.c
index 2e6b6d4085..6c3299eea3 100644
--- a/firmware/target/arm/as3525/system-as3525.c
+++ b/firmware/target/arm/as3525/system-as3525.c
@@ -205,7 +205,8 @@ static void sdram_init(void)
 /* 16 bits external bus, low power SDRAM, 16 Mbits = 2 Mbytes */
 #define MEMORY_MODEL 0x21
 
-#elif defined(SANSA_E200V2) || defined(SANSA_FUZE) || defined(SANSA_CLIPV2)
+#elif defined(SANSA_E200V2) || defined(SANSA_FUZE) || defined(SANSA_CLIPV2) \
+    || defined(SANSA_CLIPPLUS)
 /* 16 bits external bus, high performance SDRAM, 64 Mbits = 8 Mbytes */
 #define MEMORY_MODEL 0x5
 
@@ -256,7 +257,7 @@ void memory_init(void)
 
 void system_init(void)
 {
-#ifdef SANSA_CLIPV2
+#if CONFIG_CPU == AS3525v2
     /* Init procedure isn't fully understood yet
      * CCU_* registers differ from AS3525
      */
@@ -270,7 +271,7 @@ void system_init(void)
     CGU_PERI &= ~0x7f;      /* pclk 24 MHz */
     CGU_PERI |= ((CLK_DIV(AS3525_PLLA_FREQ, AS3525_PCLK_FREQ) - 1) << 2)
                 | 1; /* clk_in = PLLA */
-#else   /* SANSA_CLIPV2 */
+#else
     unsigned int reset_loops = 640;
 
     CCU_SRC = 0x1fffff0
@@ -315,7 +316,7 @@ void system_init(void)
     sdram_init();
 #endif  /* BOOTLOADER */
 
-#endif /* SANSA_CLIPV2 */
+#endif /* CONFIG_CPU == AS3525v2 */
 
 #if 0 /* the GPIO clock is already enabled by the dualboot function */
     CGU_PERI |= CGU_GPIO_CLOCK_ENABLE;