summaryrefslogtreecommitdiffstats
path: root/firmware
diff options
context:
space:
mode:
authorBertrik Sikken <bertrik@sikken.nl>2009-09-05 18:56:59 +0000
committerBertrik Sikken <bertrik@sikken.nl>2009-09-05 18:56:59 +0000
commit533c29b2f25ad836e4f704e75f22b66ab093119c (patch)
tree71370c34c915765cde7d7762d5effa514a2445de /firmware
parent4034e0b47fbc91cb530e9621cc6be243c071597c (diff)
downloadrockbox-533c29b2f25ad836e4f704e75f22b66ab093119c.tar.gz
rockbox-533c29b2f25ad836e4f704e75f22b66ab093119c.tar.bz2
rockbox-533c29b2f25ad836e4f704e75f22b66ab093119c.zip
Sansa c200v2: update DBOP button reading mechanism, this enables readout of the volume buttons, rec and hold button.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22635 a1c6a512-1295-4272-9138-f99709370657
Diffstat (limited to 'firmware')
-rw-r--r--firmware/target/arm/as3525/sansa-c200v2/button-c200v2.c59
-rw-r--r--firmware/target/arm/lcd-c200_c200v2.c50
2 files changed, 62 insertions, 47 deletions
diff --git a/firmware/target/arm/as3525/sansa-c200v2/button-c200v2.c b/firmware/target/arm/as3525/sansa-c200v2/button-c200v2.c
index 965006ce61..b7ce7330c0 100644
--- a/firmware/target/arm/as3525/sansa-c200v2/button-c200v2.c
+++ b/firmware/target/arm/as3525/sansa-c200v2/button-c200v2.c
@@ -26,10 +26,10 @@
#include "powermgmt.h"
-unsigned short _dbop_din = 0;
+static unsigned short _dbop_din = 0xFFFF;
/* in the lcd driver */
-extern bool lcd_button_support(void);
+extern unsigned short int lcd_dbop_input(void);
static bool hold_button = false;
#ifndef BOOTLOADER
@@ -52,26 +52,6 @@ bool button_hold(void)
return hold_button;
}
-static void button_read_dbop(void)
-{
- /* Set up dbop for input */
- DBOP_CTRL |= (1<<19); /* Tri-state DBOP on read cycle */
- DBOP_CTRL &= ~(1<<16); /* disable output (1:write enabled) */
- DBOP_TIMPOL_01 = 0xe167e167; /* Set Timing & Polarity regs 0 & 1 */
- DBOP_TIMPOL_23 = 0xe167006e; /* Set Timing & Polarity regs 2 & 3 */
-
- DBOP_CTRL |= (1<<15); /* start read */
- while (!(DBOP_STAT & (1<<16))); /* wait for valid data */
-
- _dbop_din = DBOP_DIN; /* Read dbop data*/
-
- /* Reset dbop for output */
- DBOP_TIMPOL_01 = 0x6e167; /* Set Timing & Polarity regs 0 & 1 */
- DBOP_TIMPOL_23 = 0xa167e06f; /* Set Timing & Polarity regs 2 & 3 */
- DBOP_CTRL |= (1<<16); /* Enable output (0:write disable) */
- DBOP_CTRL &= ~(1<<19); /* Tri-state when no active write */
-}
-
/*
* Get button pressed from hardware
*/
@@ -79,13 +59,27 @@ int button_read_device(void)
{
int btn = BUTTON_NONE;
+ _dbop_din = lcd_dbop_input();
+
+ /* hold button handling */
+ hold_button = ((_dbop_din & (1<<12)) == 0);
+#ifndef BOOTLOADER
+ /* light handling */
+ if (hold_button != hold_button_old)
+ {
+ hold_button_old = hold_button;
+ backlight_hold_changed(hold_button);
+ }
+#endif /* BOOTLOADER */
+ if (hold_button) {
+ return 0;
+ }
+
/* direct GPIO connections */
if (GPIOA_PIN(3))
btn |= BUTTON_POWER;
- if(lcd_button_support())
- button_read_dbop();
-
+ /* DBOP buttons */
if(!(_dbop_din & (1<<2)))
btn |= BUTTON_LEFT;
if(!(_dbop_din & (1<<3)))
@@ -96,15 +90,12 @@ int button_read_device(void)
btn |= BUTTON_UP;
if(!(_dbop_din & (1<<6)))
btn |= BUTTON_RIGHT;
-
-#ifndef BOOTLOADER
- /* light handling */
- if (hold_button != hold_button_old)
- {
- hold_button_old = hold_button;
- backlight_hold_changed(hold_button);
- }
-#endif /* BOOTLOADER */
+ if(!(_dbop_din & (1<<13)))
+ btn |= BUTTON_VOL_UP;
+ if(!(_dbop_din & (1<<14)))
+ btn |= BUTTON_VOL_DOWN;
+ if(!(_dbop_din & (1<<15)))
+ btn |= BUTTON_REC;
return btn;
}
diff --git a/firmware/target/arm/lcd-c200_c200v2.c b/firmware/target/arm/lcd-c200_c200v2.c
index 06cb475d9d..3ba1bf0f07 100644
--- a/firmware/target/arm/lcd-c200_c200v2.c
+++ b/firmware/target/arm/lcd-c200_c200v2.c
@@ -29,6 +29,7 @@
#ifdef SANSA_C200V2
/* button driver needs to know if a lcd operation is in progress */
static bool lcd_busy = false;
+static unsigned short dbop_input = 0xFFFF;
#endif
/* Display status */
@@ -182,24 +183,45 @@ static inline void as3525_dbop_init(void)
lcd_delay(20);
}
-/* we need to set the DBOP_DOUT pins high, for correct dbop reads */
-bool lcd_button_support(void)
+static unsigned short lcd_dbop_read(void)
{
- const fb_data data = 0xffff;
-
- if (lcd_busy) /* we can't use dbop for reading if we are in the */
- return false; /* middle of a write operation */
+ unsigned int dbop_ctrl_old = DBOP_CTRL;
+ unsigned int dbop_timpol23_old = DBOP_TIMPOL_23;
+ unsigned int value;
+
+ /* make sure that the DBOP FIFO is empty */
+ while ((DBOP_STAT & (1<<10)) == 0);
- /* use out of screen coordinates */
- lcd_send_command(R_X_ADDR_AREA, 0);
- lcd_send_command(1, 0);
- lcd_send_command(R_Y_ADDR_AREA, 0);
- lcd_send_command(1, 0);
+ /* write DBOP_DOUT to pre-charge DBOP data lines with a high level */
+ DBOP_TIMPOL_23 = 0xe167e167; /* no strobe towards lcd */
+ DBOP_CTRL = (1 << 16) | /* enw=1 (enable write) */
+ (1 << 12); /* ow=1 (16-bit data width) */
+ DBOP_DOUT = 0xFFFF; /* all pins high */
+ while ((DBOP_STAT & (1<<10)) == 0);
- lcd_write_data(&data, 1);
+ /* perform a DBOP read */
+ DBOP_CTRL = (1 << 15) | /* strd=1 (start read) */
+ (1 << 12) | /* ow=1 (16-bit data width) */
+ (31 << 0); /* rs_t=31 (read DBOP at end of cycle) */
+ while ((DBOP_STAT & (1<<16)) == 0);
+ value = DBOP_DIN;
+
+ /* restore previous values */
+ DBOP_TIMPOL_23 = dbop_timpol23_old;
+ DBOP_CTRL = dbop_ctrl_old;
+
+ return value;
+}
- return true;
+/* get the DBOP input value, either directly or cached if DBOP is busy */
+unsigned short int lcd_dbop_input(void)
+{
+ if (!lcd_busy) {
+ dbop_input = lcd_dbop_read();
+ }
+ return dbop_input;
}
+
#endif
/* LCD init */
@@ -430,6 +452,8 @@ void lcd_update_rect(int x, int y, int width, int height)
#ifdef SANSA_C200V2
lcd_busy = true;
+ /* perform a dbop read before doing a potentially lengthy lcd update */
+ dbop_input = lcd_dbop_read();
#endif
if (width <= 1) {