summaryrefslogtreecommitdiffstats
path: root/firmware
diff options
context:
space:
mode:
authorDominik Wenger <domonoky@googlemail.com>2009-10-22 17:45:02 +0000
committerDominik Wenger <domonoky@googlemail.com>2009-10-22 17:45:02 +0000
commit5b4938a8ca8494afa560200b67eb76df4224caea (patch)
treea3051a2e0abf058d9b8a7b09483d3a3f381b8e50 /firmware
parent724d1e0f3cfba44d7aa4248d15c3ce35a718a91f (diff)
downloadrockbox-5b4938a8ca8494afa560200b67eb76df4224caea.tar.gz
rockbox-5b4938a8ca8494afa560200b67eb76df4224caea.zip
Working Bootloader for mini2440.
Flyspray: FS#10701 Author: Bob Cousins git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23316 a1c6a512-1295-4272-9138-f99709370657
Diffstat (limited to 'firmware')
-rw-r--r--firmware/SOURCES8
-rw-r--r--firmware/export/s3c2440.h131
-rw-r--r--firmware/export/sd.h43
-rw-r--r--firmware/target/arm/s3c2440/dma-s3c2440.c207
-rw-r--r--firmware/target/arm/s3c2440/dma-target.h59
-rw-r--r--firmware/target/arm/s3c2440/sd-s3c2440.c911
-rw-r--r--firmware/target/arm/s3c2440/uart-s3c2440.c248
-rw-r--r--firmware/target/arm/s3c2440/uart-s3c2440.h48
8 files changed, 1652 insertions, 3 deletions
diff --git a/firmware/SOURCES b/firmware/SOURCES
index a3c47a6ddb..5406b161ad 100644
--- a/firmware/SOURCES
+++ b/firmware/SOURCES
@@ -1399,24 +1399,26 @@ target/arm/at91sam/lyre_proto1/timer-lyre_proto1.c
target/arm/lcd-as-memframe.S
target/arm/mmu-arm.S
target/arm/s3c2440/debug-s3c2440.c
+target/arm/s3c2440/dma-s3c2440.c
target/arm/s3c2440/kernel-s3c2440.c
target/arm/s3c2440/lcd-s3c2440.c
+target/arm/s3c2440/sd-s3c2440.c
target/arm/s3c2440/system-s3c2440.c
+target/arm/s3c2440/uart-s3c2440.c
target/arm/s3c2440/mini2440/backlight-mini2440.c
target/arm/s3c2440/mini2440/button-mini2440.c
target/arm/s3c2440/mini2440/led-mini2440.c
target/arm/s3c2440/mini2440/power-mini2440.c
#ifdef BOOTLOADER
-/*target/arm/s3c2440/mini2440/mini2440_test.c*/
#endif
#ifndef BOOTLOADER
target/arm/s3c2440/mini2440/adc-mini2440.c
-target/arm/s3c2440/mini2440/i2c-mini2440.c
+//target/arm/s3c2440/mini2440/i2c-mini2440.c
target/arm/s3c2440/mini2440/pcm-mini2440.c
target/arm/s3c2440/mini2440/powermgmt-mini2440.c
target/arm/s3c2440/mini2440/power-mini2440.c
target/arm/s3c2440/mini2440/timer-mini2440.c
-target/arm/s3c2440/mini2440/usb-mini2440.c
+//target/arm/s3c2440/mini2440/usb-mini2440.c
#endif
#endif /* SIMULATOR */
#endif /* MINI2440 */
diff --git a/firmware/export/s3c2440.h b/firmware/export/s3c2440.h
index 5f595214a1..c783b37f29 100644
--- a/firmware/export/s3c2440.h
+++ b/firmware/export/s3c2440.h
@@ -212,6 +212,41 @@
#define DMASKTRIG_ON (1 << 1)
#define DMASKTRIG_SW_TRIG (1 << 0)
+/* Get DMA request source (HWSRCSEL) from the map for the specified channel */
+#define DMA_GET_SRC(map,channel) ( ((map) << (channel*8)) & 0xff)
+
+#define DMA_CH0(x) (x<<0)
+#define DMA_CH1(x) (x<<8)
+#define DMA_CH2(x) (x<<16)
+#define DMA_CH3(x) (x<<24)
+
+#define DMA_INVALID 0xff
+#define DMA_INV0 DMA_CH0(DMA_INVALID)
+#define DMA_INV1 DMA_CH1(DMA_INVALID)
+#define DMA_INV2 DMA_CH2(DMA_INVALID)
+#define DMA_INV3 DMA_CH3(DMA_INVALID)
+
+/* This map encodes the DMA request source field (HWSRCSEL) since it's value
+ * depends on channel number and peripheral type.
+ */
+#define DMA_SRC_MAP_XDREQ0 (DMA_CH0(0) | DMA_INV1 | DMA_INV2 | DMA_INV3)
+#define DMA_SRC_MAP_XDREQ1 (DMA_INV0 | DMA_CH1(0) | DMA_INV2 | DMA_INV3)
+#define DMA_SRC_MAP_USB_EP1 (DMA_CH0(4) | DMA_INV1 | DMA_INV2 | DMA_INV3)
+#define DMA_SRC_MAP_USB_EP2 (DMA_INV0 | DMA_CH1(4) | DMA_INV2 | DMA_INV3)
+#define DMA_SRC_MAP_USB_EP3 (DMA_INV0 | DMA_INV1 | DMA_CH2(4) | DMA_INV3)
+#define DMA_SRC_MAP_USB_EP4 (DMA_INV0 | DMA_INV1 | DMA_INV2 | DMA_CH3(4))
+#define DMA_SRC_MAP_SDI (DMA_CH0(2) | DMA_CH1(6) | DMA_CH2(2) | DMA_CH3(1))
+#define DMA_SRC_MAP_UART0 (DMA_CH0(1) | DMA_INV1 | DMA_INV2 | DMA_INV3)
+#define DMA_SRC_MAP_UART1 (DMA_INV0 | DMA_CH1(1) | DMA_INV2 | DMA_INV3)
+#define DMA_SRC_MAP_UART2 (DMA_INV0 | DMA_INV1 | DMA_INV2 | DMA_CH3(0))
+#define DMA_SRC_MAP_I2SSDO (DMA_CH0(5) | DMA_INV1 | DMA_CH2(0) | DMA_INV3)
+#define DMA_SRC_MAP_I2SSDI (DMA_INV0 | DMA_CH1(2) | DMA_CH2(1) | DMA_INV3)
+#define DMA_SRC_MAP_PCMOUT (DMA_INV0 | DMA_CH1(5) | DMA_INV2 | DMA_CH3(6))
+#define DMA_SRC_MAP_PCMIN (DMA_CH0(6) | DMA_INV1 | DMA_CH2(5) | DMA_INV3)
+#define DMA_SRC_MAP_MICIN (DMA_INV0 | DMA_INV1 | DMA_CH2(6) | DMA_CH3(5))
+#define DMA_SRC_MAP_SPI0 (DMA_INV0 | DMA_CH1(3) | DMA_INV2 | DMA_INV3)
+#define DMA_SRC_MAP_SPI1 (DMA_INV0 | DMA_INV1 | DMA_INV2 | DMA_CH3(2))
+#define DMA_SRC_MAP_TIMER (DMA_CH0(3) | DMA_INV1 | DMA_CH2(3) | DMA_CH3(3))
/* Clock & Power Management */
@@ -543,6 +578,102 @@
#define SDIDAT_HBE (*(volatile unsigned short *)0x5A000041) /* 16 */
#define SDIDAT_BBE (*(volatile unsigned char *)0x5A000043) /* 8 */
+/* SDI register bit definitions. S3C2440 is a superset of S3C2410 */
+
+#define S3C2440_SDICON_SDRESET (1<<8)
+#define S3C2440_SDICON_MMCCLOCK (1<<5)
+#define S3C2410_SDICON_BYTEORDER (1<<4)
+#define S3C2410_SDICON_SDIOIRQ (1<<3)
+#define S3C2410_SDICON_RWAITEN (1<<2)
+#define S3C2410_SDICON_FIFORESET (1<<1)
+#define S3C2410_SDICON_CLOCKTYPE (1<<0)
+
+#define S3C2410_SDICMDCON_ABORT (1<<12)
+#define S3C2410_SDICMDCON_WITHDATA (1<<11)
+#define S3C2410_SDICMDCON_LONGRSP (1<<10)
+#define S3C2410_SDICMDCON_WAITRSP (1<<9)
+#define S3C2410_SDICMDCON_CMDSTART (1<<8)
+#define S3C2410_SDICMDCON_SENDERHOST (1<<6)
+#define S3C2410_SDICMDCON_INDEX (0x3f)
+
+#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12)
+#define S3C2410_SDICMDSTAT_CMDSENT (1<<11)
+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
+#define S3C2410_SDICMDSTAT_RSPFIN (1<<9)
+#define S3C2410_SDICMDSTAT_XFERING (1<<8)
+#define S3C2410_SDICMDSTAT_INDEX (0xff)
+
+#define S3C2440_SDIDCON_DS_BYTE (0<<22)
+#define S3C2440_SDIDCON_DS_HALFWORD (1<<22)
+#define S3C2440_SDIDCON_DS_WORD (2<<22)
+#define S3C2410_SDIDCON_IRQPERIOD (1<<21)
+#define S3C2410_SDIDCON_TXAFTERRESP (1<<20)
+#define S3C2410_SDIDCON_RXAFTERCMD (1<<19)
+#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18)
+#define S3C2410_SDIDCON_BLOCKMODE (1<<17)
+#define S3C2410_SDIDCON_WIDEBUS (1<<16)
+#define S3C2410_SDIDCON_DMAEN (1<<15)
+#define S3C2410_SDIDCON_STOP (0<<14)
+#define S3C2440_SDIDCON_DATSTART (1<<14)
+#define S3C2410_SDIDCON_DATMODE (3<<12)
+#define S3C2410_SDIDCON_BLKNUM (0xfff)
+
+/* constants for S3C2410_SDIDCON_DATMODE */
+#define S3C2410_SDIDCON_XFER_READY (0<<12)
+#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
+#define S3C2410_SDIDCON_XFER_RXSTART (2<<12)
+#define S3C2410_SDIDCON_XFER_TXSTART (3<<12)
+
+#define S3C2410_SDIDCNT_BLKNUM_MASK (0xFFF)
+#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12)
+
+#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10)
+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
+#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */
+#define S3C2410_SDIDSTA_CRCFAIL (1<<7)
+#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6)
+#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5)
+#define S3C2410_SDIDSTA_XFERFINISH (1<<4)
+#define S3C2410_SDIDSTA_BUSYFINISH (1<<3)
+#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */
+#define S3C2410_SDIDSTA_TXDATAON (1<<1)
+#define S3C2410_SDIDSTA_RXDATAON (1<<0)
+
+#define S3C2410_SDIDSTA_CLEAR_BITS ( S3C2410_SDIDSTA_BUSYFINISH | \
+ S3C2410_SDIDSTA_XFERFINISH | S3C2410_SDIDSTA_DATATIMEOUT | \
+ S3C2410_SDIDSTA_RXCRCFAIL | S3C2410_SDIDSTA_CRCFAIL | \
+ S3C2410_SDIDSTA_SDIOIRQDETECT | S3C2410_SDIDSTA_RDYWAITREQ )
+
+#define S3C2440_SDIFSTA_FIFORESET (1<<16)
+#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */
+#define S3C2410_SDIFSTA_TFDET (1<<13)
+#define S3C2410_SDIFSTA_RFDET (1<<12)
+#define S3C2410_SDIFSTA_TFHALF (1<<11)
+#define S3C2410_SDIFSTA_TFEMPTY (1<<10)
+#define S3C2410_SDIFSTA_RFLAST (1<<9)
+#define S3C2410_SDIFSTA_RFFULL (1<<8)
+#define S3C2410_SDIFSTA_RFHALF (1<<7)
+#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
+
+#define S3C2410_SDIIMSK_RESPONSECRC (1<<17)
+#define S3C2410_SDIIMSK_CMDSENT (1<<16)
+#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15)
+#define S3C2410_SDIIMSK_RESPONSEND (1<<14)
+#define S3C2410_SDIIMSK_READWAIT (1<<13)
+#define S3C2410_SDIIMSK_SDIOIRQ (1<<12)
+#define S3C2410_SDIIMSK_FIFOFAIL (1<<11)
+#define S3C2410_SDIIMSK_CRCSTATUS (1<<10)
+#define S3C2410_SDIIMSK_DATACRC (1<<9)
+#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8)
+#define S3C2410_SDIIMSK_DATAFINISH (1<<7)
+#define S3C2410_SDIIMSK_BUSYFINISH (1<<6)
+#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */
+#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4)
+#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3)
+#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2)
+#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1)
+#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0)
+
/* AC97 Audio-CODEC Interface */
#define AC_GLBCTRL (*(volatile unsigned long *)0x5B000000) /* AC97 global control register */
diff --git a/firmware/export/sd.h b/firmware/export/sd.h
index 0b64bd768d..7204b1a0bf 100644
--- a/firmware/export/sd.h
+++ b/firmware/export/sd.h
@@ -100,4 +100,47 @@ int sd_num_drives(int first_drive);
#define SD_SEND_SCR 51 /* acmd51 */
#define SD_APP_CMD 55
+/*
+ SD/MMC status in R1, for native mode (SPI bits are different)
+ Type
+ e : error bit
+ s : status bit
+ r : detected and set for the actual command response
+ x : detected and set during command execution. the host must poll
+ the card by sending status command in order to read these bits.
+ Clear condition
+ a : according to the card state
+ b : always related to the previous command. Reception of
+ a valid command will clear it (with a delay of one command)
+ c : clear by read
+ */
+
+#define SD_R1_OUT_OF_RANGE (1 << 31) /* erx, c */
+#define SD_R1_ADDRESS_ERROR (1 << 30) /* erx, c */
+#define SD_R1_BLOCK_LEN_ERROR (1 << 29) /* erx, c */
+#define SD_R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */
+#define SD_R1_ERASE_PARAM (1 << 27) /* exx, c */
+#define SD_R1_WP_VIOLATION (1 << 26) /* erx, c */
+#define SD_R1_CARD_IS_LOCKED (1 << 25) /* sx, a */
+#define SD_R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */
+#define SD_R1_COM_CRC_ERROR (1 << 23) /* er, b */
+#define SD_R1_ILLEGAL_COMMAND (1 << 22) /* er, b */
+#define SD_R1_CARD_ECC_FAILED (1 << 21) /* erx, c */
+#define SD_R1_CC_ERROR (1 << 20) /* erx, c */
+#define SD_R1_ERROR (1 << 19) /* erx, c */
+#define SD_R1_UNDERRUN (1 << 18) /* ex, c */
+#define SD_R1_OVERRUN (1 << 17) /* ex, c */
+#define SD_R1_CSD_OVERWRITE (1 << 16) /* erx, c */
+#define SD_R1_WP_ERASE_SKIP (1 << 15) /* erx, c */
+#define SD_R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */
+#define SD_R1_ERASE_RESET (1 << 13) /* sr, c */
+#define SD_R1_STATUS(x) (x & 0xFFFFE000)
+#define SD_R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
+#define SD_R1_READY_FOR_DATA (1 << 8) /* sx, a */
+#define SD_R1_APP_CMD (1 << 5) /* sr, c */
+#define SD_R1_AKE_SEQ_ERROR (1 << 3) /* er, c */
+
+/* SD OCR bits */
+#define SD_OCR_CARD_CAPACITY_STATUS (1 << 30) /* Card Capacity Status */
+
#endif
diff --git a/firmware/target/arm/s3c2440/dma-s3c2440.c b/firmware/target/arm/s3c2440/dma-s3c2440.c
new file mode 100644
index 0000000000..b83897cb22
--- /dev/null
+++ b/firmware/target/arm/s3c2440/dma-s3c2440.c
@@ -0,0 +1,207 @@
+/***************************************************************************
+ * __________ __ ___.
+ * Open \______ \ ____ ____ | | _\_ |__ _______ ___
+ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
+ * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
+ * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
+ * \/ \/ \/ \/ \/
+ * $Id$
+ *
+ * Copyright 2009 by Bob Cousins
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include <stdbool.h>
+#include "config.h"
+#include "panic.h"
+#include "system.h"
+#include "mmu-arm.h"
+#include "s3c2440.h"
+#include "dma-target.h"
+#include "system-target.h"
+
+#define NUM_CHANNELS 4
+
+static int dma_used = 0;
+
+/* Status flags */
+#define STATUS_CHANNEL_ACTIVE (1<<0)
+
+struct dma_channel_state
+{
+ volatile unsigned status;
+ void (*callback)(void);
+} dma_state [NUM_CHANNELS];
+
+struct dma_channel_regs
+{
+ volatile unsigned long disrc;
+ volatile unsigned long disrcc;
+ volatile unsigned long didst;
+ volatile unsigned long didstc;
+ volatile unsigned long dcon;
+ volatile unsigned long dstat;
+ volatile unsigned long dcsrc;
+ volatile unsigned long dcdst;
+ volatile unsigned long dmasktrig;
+ volatile unsigned long reserved [7]; /* pad to 0x40 bytes */
+};
+
+
+struct dma_channel_regs *dma_regs [4] =
+ {
+ (struct dma_channel_regs *) &DISRC0,
+ (struct dma_channel_regs *) &DISRC1,
+ (struct dma_channel_regs *) &DISRC2,
+ (struct dma_channel_regs *) &DISRC3
+ }
+;
+
+
+void dma_init(void)
+{
+ /* TODO */
+
+ /* Enable interupt on DMA Finish */
+ /* Clear pending source */
+ SRCPND = DMA0_MASK | DMA1_MASK | DMA2_MASK | DMA3_MASK;
+ INTPND = DMA0_MASK | DMA1_MASK | DMA2_MASK | DMA3_MASK;
+
+ /* Enable interrupt in controller */
+ s3c_regclr32(&INTMOD, DMA0_MASK | DMA1_MASK | DMA2_MASK | DMA3_MASK);
+ s3c_regclr32(&INTMSK, DMA0_MASK | DMA1_MASK | DMA2_MASK | DMA3_MASK);
+}
+
+void dma_retain(void)
+{
+ /* TODO */
+ dma_used++;
+ if(dma_used > 0)
+ {
+ /* Enable DMA controller, clock? */
+ }
+}
+
+void dma_release(void)
+{
+ /* TODO */
+ if (dma_used > 0)
+ dma_used--;
+ if(dma_used == 0)
+ {
+ /* Disable DMA */
+ }
+}
+
+
+inline void dma_disable_channel(int channel)
+{
+ struct dma_channel_regs *regs = dma_regs [channel];
+
+ /* disable the specified channel */
+
+ /* Reset the channel */
+ regs->dmasktrig |= DMASKTRIG_STOP;
+
+ /* Wait for DMA controller to be ready */
+ while(regs->dmasktrig & DMASKTRIG_ON)
+ ;
+ while(regs->dstat & DSTAT_STAT_BUSY)
+ ;
+}
+
+void dma_enable_channel(int channel, struct dma_request *request)
+{
+ struct dma_channel_regs *regs = dma_regs [channel];
+
+ /* TODO - transfer sizes (assumes word) */
+
+ if (DMA_GET_SRC(request->source_map, channel) == DMA_INVALID)
+ panicf ("DMA: invalid channel");
+
+ /* setup a transfer on specified channel */
+ dma_disable_channel (channel);
+
+ if((unsigned long)request->source_addr < UNCACHED_BASE_ADDR)
+ regs->disrc = (unsigned long)request->source_addr + UNCACHED_BASE_ADDR;
+ else
+ regs->disrc = (unsigned long)request->source_addr;
+ regs->disrcc = request->source_control;
+
+ if((unsigned long)request->dest_addr < UNCACHED_BASE_ADDR)
+ regs->didst = (unsigned long)request->dest_addr + UNCACHED_BASE_ADDR;
+ else
+ regs->didst = (unsigned long)request->dest_addr;
+ regs->didstc = request->dest_control;
+
+ regs->dcon = request->control | request->count |
+ DMA_GET_SRC(request->source_map, channel) * DCON_HWSRCSEL;
+
+ dma_state [channel].callback = request->callback;
+
+ /* Activate the channel */
+ invalidate_dcache_range((void *)request->dest_addr, request->count * 4);
+
+ dma_state [channel].status |= STATUS_CHANNEL_ACTIVE;
+ regs->dmasktrig = DMASKTRIG_ON;
+
+ if ((request->control & DCON_HW_SEL) == 0)
+ {
+ /* Start DMA */
+ regs->dmasktrig |= DMASKTRIG_SW_TRIG;
+ }
+
+}
+
+/* ISRs */
+inline void generic_isr (unsigned channel)
+{
+ if (dma_state [channel].status | STATUS_CHANNEL_ACTIVE)
+ {
+ if (dma_state [channel].callback)
+ /* call callback for relevant channel */
+ dma_state [channel].callback();
+
+ dma_state [channel].status &= ~STATUS_CHANNEL_ACTIVE;
+ }
+}
+
+void DMA0(void)
+{
+ generic_isr (0);
+ /* Ack the interrupt */
+ SRCPND = DMA0_MASK;
+ INTPND = DMA0_MASK;
+}
+
+void DMA1(void)
+{
+ generic_isr (1);
+ /* Ack the interrupt */
+ SRCPND = DMA1_MASK;
+ INTPND = DMA1_MASK;
+}
+
+void DMA2(void)
+{
+ generic_isr (2);
+ /* Ack the interrupt */
+ SRCPND = DMA2_MASK;
+ INTPND = DMA2_MASK;
+}
+
+void DMA3(void)
+{
+ generic_isr (3);
+ /* Ack the interrupt */
+ SRCPND = DMA3_MASK;
+ INTPND = DMA3_MASK;
+}
diff --git a/firmware/target/arm/s3c2440/dma-target.h b/firmware/target/arm/s3c2440/dma-target.h
new file mode 100644
index 0000000000..1baf7feab5
--- /dev/null
+++ b/firmware/target/arm/s3c2440/dma-target.h
@@ -0,0 +1,59 @@
+/***************************************************************************
+ * __________ __ ___.
+ * Open \______ \ ____ ____ | | _\_ |__ _______ ___
+ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
+ * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
+ * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
+ * \/ \/ \/ \/ \/
+ * $Id$
+ *
+ * Copyright © 2009 by Bob Cousins
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#ifndef _DMA_TARGET_H
+#define _DMA_TARGET_H
+
+#include <stdbool.h>
+#include <stdlib.h>
+
+/* DMA Channel assignments */
+#ifdef GIGABEAT_F
+#define DMA_CHAN_ATA 0
+#define DMA_CHAN_AUDIO_OUT 2
+#elif defined(MINI2440)
+#define DMA_CHAN_SD 0
+#define DMA_CHAN_AUDIO_OUT 2
+#else
+#error Unsupported target
+#endif
+
+struct dma_request
+{
+ volatile void *source_addr;
+ volatile void *dest_addr;
+ unsigned long count;
+ unsigned long source_control;
+ unsigned long dest_control;
+ unsigned long source_map;
+ unsigned long control;
+ void (*callback)(void);
+};
+
+void dma_init(void);
+void dma_enable_channel(int channel, struct dma_request *request);
+
+inline void dma_disable_channel(int channel);
+
+void dma_retain(void);
+void dma_release(void);
+
+#endif
diff --git a/firmware/target/arm/s3c2440/sd-s3c2440.c b/firmware/target/arm/s3c2440/sd-s3c2440.c
new file mode 100644
index 0000000000..78c9e9bf23
--- /dev/null
+++ b/firmware/target/arm/s3c2440/sd-s3c2440.c
@@ -0,0 +1,911 @@
+/***************************************************************************
+ * __________ __ ___.
+ * Open \______ \ ____ ____ | | _\_ |__ _______ ___
+ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
+ * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
+ * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
+ * \/ \/ \/ \/ \/
+ * $Id$
+ *
+ * Copyright (C) 2009 by Bob Cousins
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#define SD_DEBUG
+
+#include "sd.h"
+#include "system.h"
+#include <string.h>
+#include "hotswap.h"
+#include "thread.h"
+#include "panic.h"
+
+#ifdef SD_DEBUG
+#include "uart-s3c2440.h"
+#endif
+#include "dma-target.h"
+#include "system-target.h"
+#include "led-mini2440.h"
+
+/* The configuration method is not very flexible. */
+#define CARD_NUM_SLOT 0
+#define NUM_CARDS 2
+
+#if NUM_CARDS < NUM_DRIVES
+#error NUM_CARDS less than NUM_DRIVES
+#endif
+
+#define EC_OK 0
+#define EC_FAILED 1
+#define EC_NOCARD 2
+#define EC_WAIT_STATE_FAILED 3
+#define EC_POWER_UP 4
+#define EC_FIFO_WR_EMPTY 5
+#define EC_FIFO_WR_DONE 6
+#define EC_TRAN_READ_ENTRY 7
+#define EC_TRAN_READ_EXIT 8
+#define EC_TRAN_WRITE_ENTRY 9
+#define EC_TRAN_WRITE_EXIT 10
+#define EC_COMMAND 11
+#define EC_WRITE_PROTECT 12
+
+#define MIN_YIELD_PERIOD 1000
+#define UNALIGNED_NUM_SECTORS 10
+#define MAX_TRANSFER_ERRORS 10
+
+/* command flags for send_cmd */
+#define MCI_NO_FLAGS (0<<0)
+#define MCI_RESP (1<<0)
+#define MCI_LONG_RESP (1<<1)
+#define MCI_ARG (1<<2)
+
+#define INITIAL_CLK 400000 /* Initial clock */
+#define SD_CLK 24000000 /* Clock for SD cards */
+#define MMC_CLK 15000000 /* Clock for MMC cards */
+
+#define SD_ACTIVE_LED LED4
+
+#ifdef SD_DEBUG
+#define dbgprintf uart_printf
+#else
+#define dbgprintf(...)
+#endif
+
+struct sd_card_status
+{
+ int retry;
+ int retry_max;
+};
+
+/** static, private data **/
+
+/* for compatibility */
+static long last_disk_activity = -1;
+
+static bool initialized = false;
+static bool sd_enabled = false;
+static long next_yield = 0;
+
+static tCardInfo card_info [NUM_CARDS];
+
+#ifdef HAVE_MULTIDRIVE
+static int curr_card = 0; /* current active card */
+#if 0
+static struct sd_card_status sd_status[NUM_CARDS] =
+{
+#if NUM_CARDS > 1
+ {0, 10},
+#endif
+ {0, 10}
+};
+#endif
+#endif
+
+/* Shoot for around 75% usage */
+static long sd_stack [(DEFAULT_STACK_SIZE*2 + 0x1c0)/sizeof(long)];
+static const char sd_thread_name[] = "sd";
+static struct mutex sd_mtx SHAREDBSS_ATTR;
+static struct event_queue sd_queue;
+static struct wakeup transfer_completion_signal;
+static volatile unsigned int transfer_error[NUM_VOLUMES];
+/* align on cache line size */
+static unsigned char aligned_buffer[UNALIGNED_NUM_SECTORS * SD_BLOCK_SIZE]
+ __attribute__((aligned(32)));
+static unsigned char * uncached_buffer;
+
+
+/* TODO: should be in target include file */
+/*****************************************************************************
+ Definitions specific to Mini2440
+ *****************************************************************************/
+#define FCLK 405000000
+#define HCLK (FCLK/4) /* = 101,250,000 */
+#define PCLK (HCLK/2) /* = 50,625,000 */
+
+#define SD_CD (1<<8) /* Port G */
+#define SD_WP (1<<8) /* Port H */
+
+/*****************************************************************************
+ Functions specific to S3C2440 SoC
+ *****************************************************************************/
+static inline void mci_delay(void)
+{
+ /* Does this get optimised out ? */
+ int i = 0xffff;
+ while(i--) ;
+}
+
+#ifdef SD_DEBUG
+static unsigned reg_copy[16], reg_copy2[16];
+static void get_regs (unsigned *regs)
+{
+ unsigned j;
+ volatile unsigned long *sdi_reg = &SDICON;
+
+ for (j=0; j < 16;j++)
+ {
+ *regs++ = *sdi_reg++;
+ }
+}
+
+static void dump_regs (unsigned *regs1, unsigned *regs2)
+{
+ unsigned j;
+ volatile unsigned long*sdi_reg = &SDICON;
+ unsigned long diff;
+
+ for (j=0; j < 16;j++)
+ {
+ diff = *regs1 ^ *regs2;
+ if (diff)
+ uart_printf ("%8x %8x %8x %8x\n", sdi_reg, *regs1, *regs2, diff );
+ regs1++;
+ regs2++;
+ sdi_reg++;
+ }
+}
+#endif
+
+static void debug_r1(int cmd)
+{
+#if defined(SD_DEBUG)
+ uart_printf("CMD%2.2d:SDICSTA=%04x [%c%c%c%c%c-%c%c%c%c%c%c%c] SDIRSP0=%08x [%d %s] \n",
+ cmd,
+ SDICSTA,
+ (SDICSTA & S3C2410_SDICMDSTAT_CRCFAIL) ? 'C' : ' ',
+ (SDICSTA & S3C2410_SDICMDSTAT_CMDSENT) ? 'S' : ' ',
+ (SDICSTA & S3C2410_SDICMDSTAT_CMDTIMEOUT) ? 'T' : ' ',
+ (SDICSTA & S3C2410_SDICMDSTAT_RSPFIN) ? 'R' : ' ',
+ (SDICSTA & S3C2410_SDICMDSTAT_XFERING) ? 'X' : ' ',
+
+ (SDICSTA & 0x40) ? 'P' : ' ',
+ (SDICSTA & 0x20) ? 'A' : ' ',
+ (SDICSTA & 0x10) ? 'E' : ' ',
+ (SDICSTA & 0x08) ? 'C' : ' ',
+ (SDICSTA & 0x04) ? 'I' : ' ',
+ (SDICSTA & 0x02) ? 'R' : ' ',
+ (SDICSTA & 0x01) ? 'Z' : ' ',
+
+ SDIRSP0,
+ SD_R1_CURRENT_STATE(SDIRSP0),
+ (SDIRSP0 & SD_R1_READY_FOR_DATA) ? "RDY " : " "
+ );
+#else
+ (void)cmd;
+#endif
+}
+
+void SDI (void)
+{
+ int status = SDIDSTA;
+
+ transfer_error[curr_card] = status
+#if 0
+ & ( S3C2410_SDIDSTA_CRCFAIL | S3C2410_SDIDSTA_RXCRCFAIL |
+ S3C2410_SDIDSTA_DATATIMEOUT )
+#endif
+ ;
+
+ SDIDSTA |= S3C2410_SDIDSTA_CLEAR_BITS; /* needed to clear int */
+
+ dbgprintf ("SDI %x\n", transfer_error[curr_card]);
+
+ wakeup_signal(&transfer_completion_signal);
+
+ /* Ack the interrupt */
+ SRCPND = SDI_MASK;
+ INTPND = SDI_MASK;
+}
+
+#if 0
+void dma_callback (void)
+{
+ const int status = SDIDSTA;
+
+ transfer_error[0] = status & (S3C2410_SDIDSTA_CRCFAIL |
+ S3C2410_SDIDSTA_RXCRCFAIL |
+ S3C2410_SDIDSTA_DATATIMEOUT );
+
+ SDIDSTA |= S3C2410_SDIDSTA_CLEAR_BITS; /* needed to clear int */
+
+ dbgprintf ("dma_cb\n");
+ wakeup_signal(&transfer_completion_signal);
+}
+#endif
+
+static void init_sdi_controller(const int card_no)
+{
+ (void)card_no;
+
+/*****************************************************************************/
+#ifdef MINI2440
+ /* Specific to Mini2440 */
+
+ /* Enable pullups on SDCMD and SDDAT pins */
+ S3C2440_GPIO_PULLUP (GPEUP, 6, GPIO_PULLUP_ENABLE);
+ S3C2440_GPIO_PULLUP (GPEUP, 7, GPIO_PULLUP_ENABLE);
+ S3C2440_GPIO_PULLUP (GPEUP, 8, GPIO_PULLUP_ENABLE);
+ S3C2440_GPIO_PULLUP (GPEUP, 9, GPIO_PULLUP_ENABLE);
+ S3C2440_GPIO_PULLUP (GPEUP, 10, GPIO_PULLUP_ENABLE);
+
+ /* Enable special function for SDCMD, SDCLK and SDDAT pins */
+ S3C2440_GPIO_CONFIG (GPECON, 5, GPIO_FUNCTION);
+ S3C2440_GPIO_CONFIG (GPECON, 6, GPIO_FUNCTION);
+ S3C2440_GPIO_CONFIG (GPECON, 7, GPIO_FUNCTION);
+ S3C2440_GPIO_CONFIG (GPECON, 8, GPIO_FUNCTION);
+ S3C2440_GPIO_CONFIG (GPECON, 9, GPIO_FUNCTION);
+ S3C2440_GPIO_CONFIG (GPECON, 10, GPIO_FUNCTION);
+
+ /* Card Detect input */
+ S3C2440_GPIO_CONFIG (GPGCON, 8, GPIO_INPUT);
+
+ /* Write Protect input */
+ S3C2440_GPIO_CONFIG (GPHCON, 8, GPIO_INPUT);
+/*****************************************************************************/
+#else
+#error Unsupported target
+#endif
+/*****************************************************************************/
+
+ /* About 400KHz for initial comms with card */
+ SDIPRE = PCLK / INITIAL_CLK - 1;
+ /* Byte order=Type A (Little Endian), clock enable */
+ SDICON = S3C2410_SDICON_CLOCKTYPE;
+ SDIFSTA |= S3C2440_SDIFSTA_FIFORESET;
+ SDIBSIZE = SD_BLOCK_SIZE;
+ SDIDTIMER= 0x7fffff; /* Set timeout count - max value */
+
+ /* Enable interupt on Data Finish or data transfer error */
+ /* Clear pending source */
+ SRCPND = SDI_MASK;
+ INTPND = SDI_MASK;
+
+#if 1
+ /* Enable interrupt in controller */
+ s3c_regclr32(&INTMOD, SDI_MASK);
+ s3c_regclr32(&INTMSK, SDI_MASK);
+
+ SDIIMSK |= S3C2410_SDIIMSK_DATAFINISH
+ | S3C2410_SDIIMSK_DATATIMEOUT
+ | S3C2410_SDIIMSK_DATACRC
+ | S3C2410_SDIIMSK_CRCSTATUS
+ | S3C2410_SDIIMSK_FIFOFAIL
+ ;
+#endif
+}
+
+static bool send_cmd(const int card_no, const int cmd, const int arg,
+ const int flags, long *response)
+{
+ bool ret;
+ unsigned val, status;
+ (void)card_no;
+
+#ifdef SD_DEBUG
+ get_regs (reg_copy);
+#endif
+ /* A major bodge. For some reason a delay is required here */
+ mci_delay();
+ dbgprintf ("send_cmd: c=%3.3d a=%08x f=%02x \n", cmd, arg, flags);
+
+#ifdef SD_DEBUG
+ get_regs (reg_copy2);
+ dump_regs (reg_copy, reg_copy2);
+#endif
+
+#if 0
+ while (SDICSTA & S3C2410_SDICMDSTAT_XFERING)
+ ; /* wait ?? */
+#endif
+ /* set up new command */
+
+ if (flags & MCI_ARG)
+ SDICARG = arg;
+ else
+ SDICARG = 0;
+
+ val = cmd | S3C2410_SDICMDCON_CMDSTART | S3C2410_SDICMDCON_SENDERHOST;
+ if(flags & MCI_RESP)
+ {
+ val |= S3C2410_SDICMDCON_WAITRSP;
+ if(flags & MCI_LONG_RESP)
+ val |= S3C2410_SDICMDCON_LONGRSP;
+ }
+
+ /* Clear command/data status flags */
+ SDICSTA |= 0x0f << 9;
+ SDIDSTA |= S3C2410_SDIDSTA_CLEAR_BITS;
+
+ /* Initiate the command */
+ SDICCON = val;
+
+ if (flags & MCI_RESP)
+ {
+ /* wait for response or timeout */
+ do
+ {
+ status = SDICSTA;
+ } while ( (status & (S3C2410_SDICMDSTAT_RSPFIN |
+ S3C2410_SDICMDSTAT_CMDTIMEOUT) ) == 0);
+ debug_r1(cmd);
+ if (status & S3C2410_SDICMDSTAT_CMDTIMEOUT)
+ ret = false;
+ else if (status & (S3C2410_SDICMDSTAT_RSPFIN))
+ {
+ /* resp received */
+ if(flags & MCI_LONG_RESP)
+ {
+ /* store the response in reverse word order */
+ response[0] = SDIRSP3;
+ response[1] = SDIRSP2;
+ response[2] = SDIRSP1;
+ response[3] = SDIRSP0;
+ }
+ else
+ response[0] = SDIRSP0;
+ ret = true;
+ }
+ else
+ ret = true;
+ }
+ else
+ {
+ /* wait for command completion or timeout */
+ do
+ {
+ status = SDICSTA;
+ } while ( (status & (S3C2410_SDICMDSTAT_CMDSENT |
+ S3C2410_SDICMDSTAT_CMDTIMEOUT)) == 0);
+ debug_r1(cmd);
+ if (status & S3C2410_SDICMDSTAT_CMDTIMEOUT)
+ ret = false;
+ else
+ ret = true;
+ }
+
+ /* Clear Command status flags */
+ SDICSTA |= 0x0f << 9;
+
+ mci_delay();
+
+ return ret;
+}
+
+static int sd_init_card(const int card_no)
+{
+ unsigned long temp_reg[4];
+ unsigned long response;
+ long init_timeout;
+ bool sdhc;
+ int i;
+
+ if(!send_cmd(card_no, SD_GO_IDLE_STATE, 0, MCI_NO_FLAGS, NULL))
+ return -1;
+
+ mci_delay();
+
+ sdhc = false;
+ if(send_cmd(card_no, SD_SEND_IF_COND, 0x1AA, MCI_RESP|MCI_ARG, &response))
+ if((response & 0xFFF) == 0x1AA)
+ sdhc = true;
+
+ /* timeout for initialization is 1sec, from SD Specification 2.00 */
+ init_timeout = current_tick + HZ;
+
+ do {
+ /* timeout */
+ if(current_tick > init_timeout)
+ return -2;
+
+ /* app_cmd */
+ if( !send_cmd(card_no, SD_APP_CMD, 0, MCI_RESP|MCI_ARG, &response) ||
+ !(response & (1<<5)) )
+ {
+ return -3;
+ }
+
+ /* acmd41 */
+ if(!send_cmd(card_no, SD_APP_OP_COND, (sdhc ? 0x40FF8000 : (1<<23)),
+ MCI_RESP|MCI_ARG, &card_info[card_no].ocr))
+ {
+ return -4;
+ }
+
+ } while(!(card_info[card_no].ocr & (1<<31)));
+
+ /* send CID */
+ if(!send_cmd(card_no, SD_ALL_SEND_CID, 0, MCI_RESP|MCI_LONG_RESP|MCI_ARG,
+ temp_reg))
+ return -5;
+
+ for(i=0; i<4; i++)
+ card_info[card_no].cid[3-i] = temp_reg[i];
+
+ /* send RCA */
+ if(!send_cmd(card_no, SD_SEND_RELATIVE_ADDR, 0, MCI_RESP|MCI_ARG,
+ &card_info[card_no].rca))
+ return -6;
+
+ /* send CSD */
+ if(!send_cmd(card_no, SD_SEND_CSD, card_info[card_no].rca,
+ MCI_RESP|MCI_LONG_RESP|MCI_ARG, temp_reg))
+ return -7;
+
+ for(i=0; i<4; i++)
+ card_info[card_no].csd[3-i] = temp_reg[i];
+
+ sd_parse_csd(&card_info[card_no]);
+
+ if(!send_cmd(card_no, SD_SELECT_CARD, card_info[card_no].rca, MCI_ARG, NULL))
+ return -9;
+
+ if(!send_cmd(card_no, SD_APP_CMD, card_info[card_no].rca, MCI_ARG, NULL))
+ return -10;
+
+ if(!send_cmd(card_no, SD_SET_BUS_WIDTH, card_info[card_no].rca | 2, MCI_ARG, NULL))
+ return -11;
+
+ if(!send_cmd(card_no, SD_SET_BLOCKLEN, card_info[card_no].blocksize, MCI_ARG,
+ NULL))
+ return -12;
+
+ card_info[card_no].initialized = 1;
+
+ /* full speed for controller clock */
+ SDIPRE = PCLK / SD_CLK - 1;
+ mci_delay();
+
+ return EC_OK;
+}
+
+/*****************************************************************************
+ Generic functions
+ *****************************************************************************/
+
+/*****************************************************************************/
+#ifdef HAVE_HOTSWAP
+
+bool card_detect_target(void)
+{
+ /* TODO - use interrupt on change? */
+#ifdef MINI2440
+ return (GPGDAT & SD_CD) == 0;
+#else
+#error Unsupported target
+#endif
+}
+
+void card_enable_monitoring_target(bool on)
+{
+ (void)on;
+ /* TODO */
+}
+
+#if 0
+void EXT0(void)
+{
+ static struct timeout sd1_oneshot;
+
+ /* TODO */
+}
+#endif
+
+bool sd_removable(IF_MD_NONVOID(int card_no))
+{
+#ifndef HAVE_MULTIDRIVE
+ const int card_no = 0;
+#endif
+ dbgprintf ("sd_remov (hs) [%d] %d\n", card_no, card_no == CARD_NUM_SLOT );
+ return (card_no == CARD_NUM_SLOT);
+}
+
+bool sd_present(IF_MD_NONVOID(int card_no))
+{
+#ifdef HAVE_MULTIDRIVE
+ (void)card_no;
+#endif
+ dbgprintf ("sd_pres (hs) [%d] %d\n", card_no, card_detect_target());
+ return card_detect_target();
+}
+
+/*****************************************************************************/
+#else
+
+bool card_detect_target(void)
+{
+ /* not applicable */
+ return false;
+}
+
+bool sd_removable(IF_MD_NONVOID(int card_no))
+{
+#ifndef HAVE_MULTIDRIVE
+ const int card_no = 0;
+#endif
+ (void)card_no;
+
+ /* not applicable */
+ dbgprintf ("sd_remov");
+ return false;
+}
+
+#endif /* HAVE_HOTSWAP */
+/*****************************************************************************/
+
+static void sd_thread(void) __attribute__((noreturn));
+static void sd_thread(void)
+{
+ struct queue_event ev;
+
+ /* TODO */
+ while (1)
+ {
+ queue_wait_w_tmo(&sd_queue, &ev, HZ);
+
+ switch ( ev.id )
+ {
+ }
+ }
+}
+
+static int sd_wait_for_state(const int card_no, unsigned int state)
+{
+ unsigned long response = 0;
+ unsigned int timeout = HZ; /* ticks */
+ long t = current_tick;
+
+ while (1)
+ {
+ long tick;
+
+ if(!send_cmd(card_no, SD_SEND_STATUS, card_info[card_no].rca,
+ MCI_RESP|MCI_ARG, &response))
+ return -1;
+
+ if( (SD_R1_CURRENT_STATE(response) == state) )
+ return 0;
+
+ if(TIME_AFTER(current_tick, t + timeout))
+ return -2;
+
+ if (TIME_AFTER((tick = current_tick), next_yield))
+ {
+ yield();
+ timeout += current_tick - tick;
+ next_yield = tick + MIN_YIELD_PERIOD;
+ }
+ }
+}
+
+static int sd_transfer_sectors(IF_MD2(int card_no,) unsigned long start,
+ int count, void* buf, const bool write)
+{
+#ifndef HAVE_MULTIDRIVE
+ const int card_no = 0;
+#endif
+ int ret = EC_OK;
+ unsigned loops = 0;
+ struct dma_request request;
+
+ mutex_lock(&sd_mtx);
+ sd_enable(true);
+ set_leds(SD_ACTIVE_LED);
+
+ curr_card = card_no;
+ if (card_info[card_no].initialized <= 0)
+ {
+ ret = sd_init_card(card_no);
+ if (!(card_info[card_no].initialized))
+ goto sd_transfer_error;
+ }
+
+ last_disk_activity = current_tick;
+
+ ret = sd_wait_for_state(card_no, SD_TRAN);
+ if (ret < 0)
+ {
+ ret -= 20;
+ goto sd_transfer_error;
+ }
+
+ dma_retain();
+
+ while(count)
+ {
+ /* 128 * 512 = 2^16, and doesn't fit in the 16 bits of DATA_LENGTH
+ * register, so we have to transfer maximum 127 sectors at a time. */
+ unsigned int transfer = (count >= 128) ? 127 : count; /* sectors */
+ void *dma_buf;
+ const int cmd =
+ write ? SD_WRITE_MULTIPLE_BLOCK : SD_READ_MULTIPLE_BLOCK;
+ unsigned long start_addr = start;
+
+ dma_buf = aligned_buffer;
+ if(transfer > UNALIGNED_NUM_SECTORS)
+ transfer = UNALIGNED_NUM_SECTORS;
+ if(write)
+ memcpy(uncached_buffer, buf, transfer * SD_BLOCK_SIZE);
+
+ /* Set start_addr to the correct unit (blocks or bytes) */
+ if(!(card_info[card_no].ocr & SD_OCR_CARD_CAPACITY_STATUS))/* not SDHC */
+ start_addr *= SD_BLOCK_SIZE;
+
+ /* TODO? */
+ SDIFSTA = SDIFSTA | S3C2440_SDIFSTA_FIFORESET;
+ SDIDCON = S3C2440_SDIDCON_DS_WORD |
+ S3C2410_SDIDCON_BLOCKMODE | S3C2410_SDIDCON_WIDEBUS |
+ S3C2410_SDIDCON_DMAEN |
+ S3C2440_SDIDCON_DATSTART |
+ ( transfer << 0);
+ if (write)
+ SDIDCON |= S3C2410_SDIDCON_TXAFTERRESP | S3C2410_SDIDCON_XFER_TXSTART;
+ else
+ SDIDCON |= S3C2410_SDIDCON_RXAFTERCMD | S3C2410_SDIDCON_XFER_RXSTART;
+
+ SDIDSTA |= S3C2410_SDIDSTA_CLEAR_BITS; /* needed to clear int */
+ SRCPND = SDI_MASK;
+ INTPND = SDI_MASK;
+
+ /* Initiate read/write command */
+ if(!send_cmd(card_no, cmd, start_addr, MCI_ARG | MCI_RESP, NULL))
+ {
+ ret -= 3*20;
+ goto sd_transfer_error;
+ }
+
+ if(write)
+ {
+ request.source_addr = dma_buf;
+ request.source_control = DISRCC_LOC_AHB | DISRCC_INC_AUTO;
+ request.dest_addr = &SDIDAT_LLE;
+ request.dest_control = DISRCC_LOC_APB | DISRCC_INC_FIXED;
+ request.count = transfer * SD_BLOCK_SIZE / sizeof(long);
+ request.source_map = DMA_SRC_MAP_SDI;
+ request.control = DCON_DMD_HS | DCON_SYNC_APB |
+ DCON_HW_SEL |
+ DCON_NO_RELOAD | DCON_DSZ_WORD;
+ request.callback = NULL;
+
+ dma_enable_channel(0, &request);
+ }
+ else
+ {
+ request.source_addr = &SDIDAT_LLE;
+ request.source_control = DISRCC_LOC_APB | DISRCC_INC_FIXED;
+ request.dest_addr = dma_buf;
+ request.dest_control = DISRCC_LOC_AHB | DISRCC_INC_AUTO;
+ request.count = transfer * SD_BLOCK_SIZE / sizeof(long);
+ request.source_map = DMA_SRC_MAP_SDI;
+ request.control = DCON_DMD_HS | DCON_SYNC_APB |
+ DCON_HW_SEL |
+ DCON_NO_RELOAD | DCON_DSZ_WORD;
+ request.callback = NULL;
+
+ dma_enable_channel(0, &request);
+ }
+
+#if 0
+ /* FIXME : we should check if the timeouts calculated from the card's
+ * CSD are lower, and use them if it is the case
+ * Note : the OF doesn't seem to use them anyway */
+ MCI_DATA_TIMER(drive) = write ?
+ SD_MAX_WRITE_TIMEOUT : SD_MAX_READ_TIMEOUT;
+ MCI_DATA_LENGTH(drive) = transfer * card_info[drive].blocksize;
+ MCI_DATA_CTRL(drive) = (1<<0) /* enable */ |
+ (!write<<1) /* transfer direction */ |
+ (1<<3) /* DMA */ |
+ (9<<4) /* 2^9 = 512 */ ;
+#endif
+
+ wakeup_wait(&transfer_completion_signal, 100 /*TIMEOUT_BLOCK*/);
+
+ /* wait for DMA to finish */
+ while (DSTAT0 & DSTAT_STAT_BUSY)
+ ;
+
+#if 0
+ status = SDIDSTA;
+ while ((status & (S3C2410_SDIDSTA_DATATIMEOUT|S3C2410_SDIDSTA_XFERFINISH)) == 0)
+ {
+ status = SDIDSTA;
+ }
+ uart_printf("%x \n", status);
+#endif
+ if( transfer_error[card_no] & S3C2410_SDIDSTA_XFERFINISH )
+ {
+ if(!write)
+ memcpy(buf, uncached_buffer, transfer * SD_BLOCK_SIZE);
+ buf += transfer * SD_BLOCK_SIZE;
+ start += transfer;
+ count -= transfer;
+ loops = 0; /* reset errors counter */
+ }
+ else
+ {
+ dbgprintf ("SD transfer error : 0x%x\n", transfer_error[card_no]);
+
+ if(loops++ > MAX_TRANSFER_ERRORS)
+ {
+ led_flash(LED1|LED2, LED3|LED4);
+ /* panicf("SD transfer error : 0x%x", transfer_error[card_no]); */
+ }
+ }
+
+ last_disk_activity = current_tick;
+
+ if(!send_cmd(card_no, SD_STOP_TRANSMISSION, 0, MCI_RESP, NULL))
+ {
+ ret = -4*20;
+ goto sd_transfer_error;
+ }
+
+#if 0
+ ret = sd_wait_for_state(card_no, SD_TRAN);
+ if (ret < 0)
+ {
+ ret -= 5*20;
+ goto sd_transfer_error;
+ }
+#endif
+ }
+
+ ret = EC_OK;
+
+sd_transfer_error:
+
+ dma_release();
+
+ clear_leds(SD_ACTIVE_LED);
+ sd_enable(false);
+
+ if (ret) /* error */
+ card_info[card_no].initialized = 0;
+
+ mutex_unlock(&sd_mtx);
+ return ret;
+}
+
+int sd_read_sectors(IF_MD2(int card_no,) unsigned long start, int incount,
+ void* inbuf)
+{
+ int ret;
+
+#ifdef HAVE_MULTIDRIVE
+ dbgprintf ("sd_read %d %x %d\n", card_no, start, incount);
+#else
+ dbgprintf ("sd_read %x %d\n", start, incount);
+#endif
+ ret = sd_transfer_sectors(IF_MD2(card_no,) start, incount, inbuf, false);
+ dbgprintf ("sd_read, ret=%d\n", ret);
+ return ret;
+}
+
+/*****************************************************************************/
+#ifndef X_BOOTLOADER
+/* writing not required for Bootloader - or is it? */
+int sd_write_sectors(IF_MD2(int card_no,) unsigned long start, int count,
+ const void* outbuf)
+{
+ dbgprintf ("sd_write %d %x %d\n", card_no, start, count);
+
+ return sd_transfer_sectors(IF_MD2(card_no,) start, count, outbuf, true);
+}
+#endif /* BOOTLOADER */
+/*****************************************************************************/
+
+void sd_enable(bool on)
+{
+ dbgprintf ("sd_enable %d\n", on);
+ /* TODO: enable/disable SDI clock */
+
+ if (sd_enabled == on)
+ return; /* nothing to do */
+ if (on)
+ {
+ sd_enabled = true;
+ }
+ else
+ {
+ sd_enabled = false;
+ }
+}
+
+int sd_init(void)
+{
+ int ret = EC_OK;
+ dbgprintf ("\n==============================\n");
+ dbgprintf (" sd_init\n");
+ dbgprintf ("==============================\n");
+
+ init_sdi_controller (0);
+#ifndef BOOTLOADER
+ sd_enabled = true;
+ sd_enable(false);
+#endif
+ wakeup_init(&transfer_completion_signal);
+ /* init mutex */
+ mutex_init(&sd_mtx);
+ queue_init(&sd_queue, true);
+ create_thread(sd_thread, sd_stack, sizeof(sd_stack), 0,
+ sd_thread_name IF_PRIO(, PRIORITY_USER_INTERFACE) IF_COP(, CPU));
+
+ uncached_buffer = UNCACHED_ADDR(&aligned_buffer[0]);
+
+ initialized = true;
+ return ret;
+}
+
+long sd_last_disk_activity(void)
+{
+ return last_disk_activity;
+}
+
+tCardInfo *card_get_info_target(int card_no)
+{
+ return &card_info[card_no];
+}
+
+/*****************************************************************************/
+#ifdef CONFIG_STORAGE_MULTI
+
+int sd_num_drives(int first_drive)
+{
+ dbgprintf ("sd_num_drv");
+#if 0
+ /* Store which logical drive number(s) we have been assigned */
+ sd_first_drive = first_drive;
+#endif
+
+ return NUM_CARDS;
+}
+
+void sd_sleepnow(void)
+{
+}
+
+bool sd_disk_is_active(void)
+{
+ return false;
+}
+
+int sd_soft_reset(void)
+{
+ return 0;
+}
+
+int sd_spinup_time(void)
+{
+ return 0;
+}
+
+#endif /* CONFIG_STORAGE_MULTI */
+/*****************************************************************************/
+
diff --git a/firmware/target/arm/s3c2440/uart-s3c2440.c b/firmware/target/arm/s3c2440/uart-s3c2440.c
new file mode 100644
index 0000000000..2a61b61a39
--- /dev/null
+++ b/firmware/target/arm/s3c2440/uart-s3c2440.c
@@ -0,0 +1,248 @@
+/***************************************************************************
+ * __________ __ ___.
+ * Open \______ \ ____ ____ | | _\_ |__ _______ ___
+ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
+ * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
+ * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
+ * \/ \/ \/ \/ \/
+ * $Id$
+ *
+ * Copyright (C) 2009 by Bob Cousins
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+/* Include Standard files */
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdarg.h>
+#include "inttypes.h"
+#include "string.h"
+#include "cpu.h"
+#include "system.h"
+#include "kernel.h"
+#include "thread.h"
+
+#include "uart-s3c2440.h"
+
+#define FCLK 405000000
+#define HCLK (FCLK/4) /* = 101,250,000 */
+#define PCLK (HCLK/2) /* = 50,625,000 */
+
+#define MAX_TX_BUF 1024
+
+
+/****************************************************************************
+ * General purpose debug function
+ ****************************************************************************/
+
+void uart_printf (const char *format, ...)
+{
+ static bool debug_uart_init = false;
+ static char tx_buf [MAX_TX_BUF];
+
+ int len;
+ unsigned char *ptr;
+ va_list ap;
+ va_start(ap, format);
+
+ ptr = tx_buf;
+ len = vsnprintf(ptr, sizeof(tx_buf), format, ap);
+ va_end(ap);
+
+ if (!debug_uart_init)
+ {
+ uart_init_device(UART_DEBUG);
+ debug_uart_init = true;
+ }
+
+ uart_send (UART_DEBUG, tx_buf, len);
+}
+
+/****************************************************************************
+ * Device level functions specific to S3C2440
+ *****************************************************************************/
+
+bool uart_init (void)
+{
+ /* anything ? */
+ return true;
+}
+
+bool uart_init_device (unsigned dev)
+{
+ /* set GPIOs, clock enable? etc */
+
+ switch (dev)
+ {
+ case 0:
+ {
+ S3C2440_GPIO_CONFIG (GPHCON, 2, GPIO_FUNCTION);
+ S3C2440_GPIO_CONFIG (GPHCON, 3, GPIO_FUNCTION);
+ S3C2440_GPIO_PULLUP (GPHUP, 2, GPIO_PULLUP_DISABLE);
+ S3C2440_GPIO_PULLUP (GPHUP, 3, GPIO_PULLUP_DISABLE);
+ break;
+ }
+ case 1:
+ {
+ S3C2440_GPIO_CONFIG (GPHCON, 4, GPIO_FUNCTION);
+ S3C2440_GPIO_CONFIG (GPHCON, 5, GPIO_FUNCTION);
+ S3C2440_GPIO_PULLUP (GPHUP, 4, GPIO_PULLUP_DISABLE);
+ S3C2440_GPIO_PULLUP (GPHUP, 5, GPIO_PULLUP_DISABLE);
+ break;
+ }
+ case 2:
+ {
+ S3C2440_GPIO_CONFIG (GPHCON, 6, GPIO_FUNCTION);
+ S3C2440_GPIO_CONFIG (GPHCON, 7, GPIO_FUNCTION);
+ S3C2440_GPIO_PULLUP (GPHUP, 6, GPIO_PULLUP_DISABLE);
+ S3C2440_GPIO_PULLUP (GPHUP, 7, GPIO_PULLUP_DISABLE);
+ break;
+ }
+ default:
+ return false;
+ }
+
+ /* set a default configuration */
+ uart_config (dev, 115200, 8, UART_NO_PARITY, UART_1_STOP_BIT);
+ return true;
+}
+
+bool uart_config (unsigned dev, unsigned speed, unsigned num_bits,
+ unsigned parity, unsigned stop_bits)
+{
+ switch (dev)
+ {
+ case 0:
+ ULCON0 = (parity << 3) + (stop_bits << 2) + (num_bits-5);
+ UCON0 = (1 << 2) + (1 << 0); /* enable TX, RX, use PCLK */
+ UBRDIV0 = PCLK / (speed*16);
+ break;
+
+ case 1:
+ ULCON1 = (parity << 3) + (stop_bits << 2) + (num_bits-5);
+ UCON1 = (1 << 2) + (1 << 0); /* enable TX, RX, use PCLK */
+ UBRDIV1 = PCLK / (speed*16);
+ break;
+
+ case 2:
+ ULCON2 = (parity << 3) + (stop_bits << 2) + (num_bits-5);
+ UCON2 = (1 << 2) + (1 << 0); /* enable TX, RX, use PCLK */
+ UBRDIV2 = PCLK / (speed*16);
+ break;
+ }
+
+ return true;
+}
+
+bool uart_send_byte (unsigned dev, char ch)
+{
+ switch (dev)
+ {
+ case 0:
+ /* wait for transmit buffer empty */
+ while ((UTRSTAT0 & 0x02) == 0)
+ ;
+ UTXH0 = ch;
+ break;
+
+ case 1:
+ /* wait for transmit buffer empty */
+ while ((UTRSTAT1 & 0x02) == 0)
+ ;
+ UTXH1 = ch;
+ break;
+
+ case 2:
+ /* wait for transmit buffer empty */
+ while ((UTRSTAT2 & 0x02) == 0)
+ ;
+ UTXH2 = ch;
+ break;
+ }
+
+ return true;
+}
+
+char uart_rx_ready (unsigned dev)
+{
+ switch (dev)
+ {
+ case 0:
+ /* wait for receive buffer data ready */
+ if (UTRSTAT0 & 0x01)
+ return true;
+ else
+ return false;
+ break;
+ case 1:
+ /* wait for receive buffer data ready */
+ if (UTRSTAT1 & 0x01)
+ return true;
+ else
+ return false;
+ break;
+ case 2:
+ /* wait for receive buffer data ready */
+ if (UTRSTAT2 & 0x01)
+ return true;
+ else
+ return false;
+ break;
+ }
+ return false;
+}
+
+char uart_read_byte (unsigned dev)
+{
+ switch (dev)
+ {
+ case 0:
+ while (!uart_rx_ready(dev))
+ ;
+ return URXH0;
+ break;
+ case 1:
+ while (!uart_rx_ready(dev))
+ ;
+ return URXH1;
+ break;
+ case 2:
+ while (!uart_rx_ready(dev))
+ ;
+ return URXH2;
+ break;
+ }
+
+ return true;
+}
+
+/****************************************************************************
+ * General
+ *****************************************************************************/
+
+bool uart_send (unsigned dev, char *buf, unsigned len)
+{
+ unsigned index=0;
+ while (index<len)
+ {
+ uart_send_byte (dev, buf[index]);
+
+ /* hack for ASCII terminals */
+ if (buf[index] == '\n')
+ uart_send_byte (dev, '\r');
+
+ index++;
+ }
+ return true;
+}
+
+
+/****************************************************************************/
diff --git a/firmware/target/arm/s3c2440/uart-s3c2440.h b/firmware/target/arm/s3c2440/uart-s3c2440.h
new file mode 100644
index 0000000000..01a8f67ea1
--- /dev/null
+++ b/firmware/target/arm/s3c2440/uart-s3c2440.h
@@ -0,0 +1,48 @@
+/***************************************************************************
+ * __________ __ ___.
+ * Open \______ \ ____ ____ | | _\_ |__ _______ ___
+ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
+ * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
+ * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
+ * \/ \/ \/ \/ \/
+ *
+ *
+ * Copyright (C) 2009 by Bob Cousins
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#ifndef __UART_S3C2440_H__
+#define __UART_S3C2440_H__
+
+#define UART_DEBUG 0
+
+#define UART_NO_PARITY 0
+#define UART_ODD_PARITY 4
+#define UART_EVEN_PARITY 5
+#define UART_MARK_PARITY 6
+#define UART_SPACE_PARITY 7
+
+#define UART_1_STOP_BIT 0
+#define UART_2_STOP_BIT 1
+
+bool uart_init (void);
+void uart_printf (const char *format, ...);
+
+/* low level routines */
+bool uart_init_device (unsigned dev);
+bool uart_config (unsigned dev, unsigned speed, unsigned num_bits, unsigned parity, unsigned stop_bits);
+bool uart_send (unsigned dev, char *buf, unsigned len);
+
+char uart_read_byte (unsigned dev);
+char uart_rx_ready (unsigned dev);
+
+
+#endif