summaryrefslogtreecommitdiffstats
path: root/manual/configure_rockbox/recording_settings.tex
diff options
context:
space:
mode:
authorAndree Buschmann <AndreeBuschmann@t-online.de>2010-04-14 20:38:21 +0000
committerAndree Buschmann <AndreeBuschmann@t-online.de>2010-04-14 20:38:21 +0000
commit1248e9c6de7687ee7bb76e43dcebac2e0575ecc7 (patch)
tree38d33f19065b92d52f0617f9cca228ee3e4c3bf9 /manual/configure_rockbox/recording_settings.tex
parent53cf63fbbc3a8b0d41feb7b81c1ef0da652f616b (diff)
downloadrockbox-1248e9c6de7687ee7bb76e43dcebac2e0575ecc7.tar.gz
rockbox-1248e9c6de7687ee7bb76e43dcebac2e0575ecc7.zip
More work on consistent usage of units in the manual. Use non-breaking spaces if applicable.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25649 a1c6a512-1295-4272-9138-f99709370657
Diffstat (limited to 'manual/configure_rockbox/recording_settings.tex')
-rw-r--r--manual/configure_rockbox/recording_settings.tex42
1 files changed, 21 insertions, 21 deletions
diff --git a/manual/configure_rockbox/recording_settings.tex b/manual/configure_rockbox/recording_settings.tex
index 5b2c1d2d68..aa469aca03 100644
--- a/manual/configure_rockbox/recording_settings.tex
+++ b/manual/configure_rockbox/recording_settings.tex
@@ -21,10 +21,10 @@
\begin{table}[h!]
\begin{rbtabular}{0.75\textwidth}{lX}%
{\emph{Frequency} & \emph{Bitrate} (Kbit/s) -- quality 0$\rightarrow$7}{}{}
- 44100 Hz stereo & 75, 80, 90, 100, 120, 140, 160, 170 \\
- 22050 Hz stereo & 39, 41, 45, 50, 60, 80, 110, 130 \\
- 44100 Hz mono & 65, 68, 73, 80, 90, 105, 125, 140 \\
- 22050 Hz mono & 35, 38, 40, 45, 50, 60, 75, 90 \\
+ 44100~Hz stereo & 75, 80, 90, 100, 120, 140, 160, 170 \\
+ 22050~Hz stereo & 39, 41, 45, 50, 60, 80, 110, 130 \\
+ 44100~Hz mono & 65, 68, 73, 80, 90, 105, 125, 140 \\
+ 22050~Hz mono & 35, 38, 40, 45, 50, 60, 75, 90 \\
\end{rbtabular}
\end{table}
}
@@ -44,30 +44,30 @@
\section{Frequency}
\nopt{sansa}{
Choose the recording frequency (sample rate).
- \opt{masf}{48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz}
- \opt{h100,h300}{44.1 kHz, 22.05 kHz and 11.025 kHz}
- \opt{x5}{88.2 kHz, 44.1 kHz, 22.05 kHz and 11.025 kHz}
- \opt{sansaAMS}{96 kHz, 88.2 kHz, 64 kHz, 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, %
- 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz and 8 kHz}
- \opt{gigabeats}{48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, %
- 11.025 kHz and 8 kHz}
+ \opt{masf}{48~kHz, 44.1~kHz, 32~kHz, 24~kHz, 22.05~kHz, 16~kHz}
+ \opt{h100,h300}{44.1~kHz, 22.05~kHz and 11.025~kHz}
+ \opt{x5}{88.2~kHz, 44.1~kHz, 22.05~kHz and 11.025~kHz}
+ \opt{sansaAMS}{96~kHz, 88.2~kHz, 64~kHz, 48~kHz, 44.1~kHz, 32~kHz, 24~kHz, %
+ 22.05~kHz, 16~kHz, 12~kHz, 11.025~kHz and 8~kHz}
+ \opt{gigabeats}{48~kHz, 44.1~kHz, 32~kHz, 24~kHz, 22.05~kHz, 16~kHz, 12~kHz, %
+ 11.025~kHz and 8~kHz}
are available. Higher sample rates use up more disk space, but give better
sound quality.
- \opt{swcodec}{\note{The 11.025 kHz setting is not available when using %
+ \opt{swcodec}{\note{The 11.025~kHz setting is not available when using %
\setting{MPEG Layer 3} format.}
}%
\opt{masf}{
The frequency setting also determines which version of the MPEG standard
the sound is recorded using:\\
- MPEG v1 for 48 kHz, 44.1 kHz and 32 kHz.\\
- MPEG v2 for 24 kHz, 22.05 kHz and 16 kHz.\\
+ MPEG v1 for 48~kHz, 44.1~kHz and 32~kHz.\\
+ MPEG v2 for 24~kHz, 22.05~kHz and 16~kHz.\\
}
\opt{recorder,recorderv2fm,h100}
{\note{You cannot change the sample rate for digital recordings.}
}
} % nopt sansa
\opt{sansa}{
- Recordings can only be made at a 22.05 kHz frequency (sample rate)
+ Recordings can only be made at a 22.05~kHz frequency (sample rate)
on this \dap.
} % opt sansa
@@ -121,7 +121,7 @@
Set the time to record between each split, if time is used as
\setting{Split Measure}.\\
Options (hours:minutes between splits): Off, 00:05, 00:10, 00:15, 00:30,
- 1:00, 1:14 (74 minute CD), 1:20 (80 minute CD), 2:00, 4:00, 8:00, 10:00,
+ 1:00, 1:14 (74 minute CD), 1:20 (80 minute CD), 2:00, 4:00, 8:00, 10:00,
12:00, 18:00, 24:00.
\item[Split Filesize.]
@@ -242,25 +242,25 @@ More information can be found at \wikilink{VolumeTriggeredRecording}.
automatically controlling the gain while recording.
\begin{description}
\item[Safety (clip).]
- This preset will lower the gain when the levels get too high (-1 dB)
+ This preset will lower the gain when the levels get too high (-1~dB)
and will never increase gain.
\item[Live (slow).]
This preset is designed to be used for recording of live shows and has
quite large headroom for loud parts. It heads for a nominal target peak
- level of -9 dB and will slowly increase or decrease gain to reach it.
+ level of -9~dB and will slowly increase or decrease gain to reach it.
\item[DJ-Set (slow).]
- This preset heads for a nominal target peak level of -5 dB and will
+ This preset heads for a nominal target peak level of -5~dB and will
slowly increase or decrease gain to reach it.
\item[Medium.]
- This preset heads for a nominal target peak level of -6 dB and will
+ This preset heads for a nominal target peak level of -6~dB and will
increase or decrease gain to reach it.
\item[Voice (fast).]
This preset is designed to be used for voice recording and heads for a
- nominal target peak level of -7 dB and will quickly increase or
+ nominal target peak level of -7~dB and will quickly increase or
decrease gain to reach it.
\end{description}