summaryrefslogtreecommitdiffstats
path: root/manual/configure_rockbox/recording_settings.tex
diff options
context:
space:
mode:
authorBertrik Sikken <bertrik@sikken.nl>2008-07-03 14:21:01 +0000
committerBertrik Sikken <bertrik@sikken.nl>2008-07-03 14:21:01 +0000
commitbb8bc32d0d730768270fd799730779a2c7d40093 (patch)
tree7763e27dafb77a5882c2147ce59033129e26d1f2 /manual/configure_rockbox/recording_settings.tex
parentf4d4a6ab60960385b99fd43d8e1d0213bdf1aec3 (diff)
downloadrockbox-bb8bc32d0d730768270fd799730779a2c7d40093.tar.gz
rockbox-bb8bc32d0d730768270fd799730779a2c7d40093.zip
Rename peakmeter to peak meter in the manual
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17928 a1c6a512-1295-4272-9138-f99709370657
Diffstat (limited to 'manual/configure_rockbox/recording_settings.tex')
-rw-r--r--manual/configure_rockbox/recording_settings.tex8
1 files changed, 4 insertions, 4 deletions
diff --git a/manual/configure_rockbox/recording_settings.tex b/manual/configure_rockbox/recording_settings.tex
index d4d1ac98f9..bb47401196 100644
--- a/manual/configure_rockbox/recording_settings.tex
+++ b/manual/configure_rockbox/recording_settings.tex
@@ -172,10 +172,10 @@
\item[Start Above]
The start threshold defines the minimal volume a sound must have to start the
recording. It is displayed numerically in the line "Start Above". Note that
- the unit of the threshold depends on the settings of the peakmeter. (i.e.
- When the peakmeter displays db you can adjust the level in db and when the
- peakmeter is set to linear the threshold is displayed as percentage.) In the
- peakmeter at the bottom of the screen the start threshold is displayed
+ the unit of the threshold depends on the settings of the peak meter. (i.e.
+ When the peak meter displays db you can adjust the level in db and when the
+ peak meter is set to linear the threshold is displayed as percentage.) In the
+ peak meter at the bottom of the screen the start threshold is displayed
graphically by a little triangle pointing to the right. There are two special
values. The value \setting{Off} turns the start condition off. With this
setting you have to start the recording manually and the trigger only stops