summaryrefslogtreecommitdiffstats
path: root/manual
diff options
context:
space:
mode:
authorPeter D'Hoye <peter.dhoye@gmail.com>2007-09-14 22:31:37 +0000
committerPeter D'Hoye <peter.dhoye@gmail.com>2007-09-14 22:31:37 +0000
commit0875a953752cb863206ec8b616d74464a1d6b556 (patch)
tree9b302004bf826a21feed3e8f2b6a92d972ca7c0e /manual
parent554f0c3771ecee9a183fa07d6e44483205b87d8a (diff)
downloadrockbox-0875a953752cb863206ec8b616d74464a1d6b556.tar.gz
rockbox-0875a953752cb863206ec8b616d74464a1d6b556.zip
FS #7761 by Costas Calamvokis: sansa manual changes
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14705 a1c6a512-1295-4272-9138-f99709370657
Diffstat (limited to 'manual')
-rw-r--r--manual/configure_rockbox/recording_settings.tex334
-rw-r--r--manual/main_menu/recording_screen.tex8
-rw-r--r--manual/platform/e200.tex5
-rw-r--r--manual/rockbox_interface/browsing_and_playing.tex5
-rw-r--r--manual/rockbox_interface/wps.tex3
5 files changed, 186 insertions, 169 deletions
diff --git a/manual/configure_rockbox/recording_settings.tex b/manual/configure_rockbox/recording_settings.tex
index be32bf59b7..c3ed5dceb1 100644
--- a/manual/configure_rockbox/recording_settings.tex
+++ b/manual/configure_rockbox/recording_settings.tex
@@ -1,164 +1,170 @@
-% $Id:$ %
-\screenshot{main_menu/images/ss-recording-settings}{The recording settings screen}{}
-
-\note{To change the location where recordings are stored open the
- \setting{File Menu} (see \reference{ref:Filemenu}) on the directory
- where you want to store them in the \setting{File Browser} and select
- \setting{Set As Recording Directory}.}
-
-\opt{MASCODEC}{
- \section{Quality}
- Choose the quality here (0 to 7). Default is 5, best quality is 7,
- smallest file size is 0. This setting effects how much your sound
- sample will be compressed. Higher quality settings result in larger
- MP3 files.
-
- The quality setting is just a way of selecting an average bit rate,
- or number of bits per second, for a recording. When this setting
- is lowered, recordings are compressed more (meaning worse sound quality),
- and the average bitrate changes as follows.
-
- \begin{table}[h!]
- \begin{center}
- \begin{tabularx}{0.75\textwidth}{lX}\toprule
- \emph{Frequency} & \emph{Bitrate} (Kbit/s) -- quality 0$\rightarrow$7 \\\midrule
- 44100Hz stereo & 75, 80, 90, 100, 120, 140, 160, 170 \\
- 22050Hz stereo & 39, 41, 45, 50, 60, 80, 110, 130 \\
- 44100Hz mono & 65, 68, 73, 80, 90, 105, 125, 140 \\
- 22050Hz mono & 35, 38, 40, 45, 50, 60, 75, 90 \\\bottomrule
- \end{tabularx}
- \end{center}
- \end{table}
-}
-
-\opt{SWCODEC}{
- \section{Format}
- Choose which format to save your recording in. The available choices are
- the two uncompressed formats \setting{PCM Wave} and \setting{AIFF}, the
- losslessly compressed \setting{WavPack} and the lossy
- \setting{MPEG Layer 3}.
-
- \section{Encoder Settings}
- This sets the bitrate when using the \setting{MPEG Layer 3} format. And has
- no settings for the other formats.
-}
-
- \section{Frequency}
- Choose the recording frequency (sample rate).
- \opt{MASCODEC}{48kHz, 44.1kHz, 32kHz, 24kHz, 22.05kHz, 16kHz}
- \opt{h1xx,h300}{44.1kHz, 22.05kHz and 11.025kHz}
- \opt{x5}{88.2kHz, 44.1kHz, 22.05kHz and 11.025kHz}
- are available. Higher sample rates use up more disk space, but give better
- sound quality.
- \opt{SWCODEC}{\note{The 11.025kHz setting is not available when using%
- \setting{MPEG Layer 3} format.}
- }%
- \opt{MASCODEC}{
- The frequency setting also determines which version of the MPEG standard
- the sound is recorded using:\\
- MPEG v1 for 48, 44.1 and 32\\
- MPEG v2 for 24, 22.05 and 16\\
- }
- \opt{recorder,recorderv2fm,h1xx}
- {\note{You cannot change the sample rate for digital recordings.}
- }
-
-\section{Source}
- Choose the source of the recording. This can be
- \opt{recorder,recorderv2fm,h1xx}{\setting{SPDIF (digital)},}%
- \setting{Mic} or \setting{Line In}.
- \opt{CONFIG_TUNER}{For recording from the radio see \reference{ref:FMradio}.}
-
-\section{Channels}
- This allows you to select mono or stereo recording. Please note that
- for mono recording, only the left channel is recorded. Mono recordings
- are usually somewhat smaller than stereo.
-
-\opt{MASCODEC}{
- \section{Independent Frames}
- The independent frames option tells the \dap{} to encode with the bit
- reservoir disabled, so the frames are independent of each other. This
- makes a file easier to edit.
-}
-
-\section{File Split Options}
- This sub menu contains options for file splitting, which can be used to split
- up long recordings into manageable pieces. The splits are seamless (frame
- accurate), no audio is lost at the split point. The break between recordings
- is only the time required to stop and restart the recording, on the order of
- 2 -- 4 seconds.
- \begin{description}
- \item[Split Measure:]
- This option controls wether to split the recording when the
- \setting{Split Filesize} is reached or when the
- \setting{Split Time} has elapsed.
-
- \item[What to do when Splitting:]
- This controls what will happend when the splitting condition is
- fullfilled the two available options here are
- \setting{Start a new file} or \setting{Stop recording}.
-
- \item[Split Time:]
- Set the time to record between each split, if time is used as
- \setting{Split Measure}.\\
- Options (hours:minutes between splits): Off, 00:05, 00:10, 00:15, 00:30,
- 1:00, 1:14 (74 minute CD), 1:20 (80 minute CD), 2:00, 4:00, 8:00, 10:00,
- 12:00, 18:00, 24:00.
-
- \item[Split Filesize:]
- Set the filesize to record between each split, if filesize is used as
- \setting{Split Measure}.
-
- \end{description}
-
-\section{Prerecord Time}
- This setting buffers a small amount of audio so that when the record button
- is pressed, the recording will begin from that number of seconds earlier.
- This is useful for ensuring that a recording begins before a cue that is
- being waited for.
-
-\section{Clear Recording Directory}
- Resets the location where the recorded files are saved to the root of your
- \daps{} drive.
-
-\nopt{ondio}{
- \section{Clipping Light}
- Causes the backlight to flash on when clipping has been detected.\\
- Options: \setting{Off}, \setting{Main unit only},
- \setting{Main and remote unit}, \setting{Remote unit only}.
-}
- \section{Trigger}
- \fixme{Add description of triggered recording.}
-
-\opt{h1xx,h300}{%
- \section{Automatic Gain Control}
- The \setting{Automatic Gain Control} has five different presets for
- automatically controlling the gain while recording.
- \begin{description}
- \item[Safety (clip):]
- This preset will lower the gain when the levels get too high (-1dB)
- and will never increase gain.
-
- \item[Live (slow):]
- This preset is designed to be used for recording of live shows and has
- quite large headroom for loud parts. It heads for a nominal target peak
- level of -9dB and will slowly increase or decrease gain to reach it.
-
- \item[DJ-Set (slow):]
- This preset heads for a nominal target peak level of -5dB and will
- slowly increase or decrease gain to reach it.
-
- \item[Medium:]
- This preset heads for a nominal target peak level of -6dB and will
- increase or decrease gain to reach it.
-
- \item[Voice (fast):]
- This preset is designed to be used for voice recording and heads for a
- nominal target peak level of -7dB and will quickly increase or
- decrease gain to reach it.
- \end{description}
-
- \section{AGC clip time}
- This setting controls how long the level is too loud or soft before the
- \setting{Automatic Gain Control} kicks in.
-}%
+% $Id:$ %
+\screenshot{main_menu/images/ss-recording-settings}{The recording settings screen}{}
+
+\note{To change the location where recordings are stored open the
+ \setting{File Menu} (see \reference{ref:Filemenu}) on the directory
+ where you want to store them in the \setting{File Browser} and select
+ \setting{Set As Recording Directory}.}
+
+\opt{MASCODEC}{
+ \section{Quality}
+ Choose the quality here (0 to 7). Default is 5, best quality is 7,
+ smallest file size is 0. This setting effects how much your sound
+ sample will be compressed. Higher quality settings result in larger
+ MP3 files.
+
+ The quality setting is just a way of selecting an average bit rate,
+ or number of bits per second, for a recording. When this setting
+ is lowered, recordings are compressed more (meaning worse sound quality),
+ and the average bitrate changes as follows.
+
+ \begin{table}[h!]
+ \begin{center}
+ \begin{tabularx}{0.75\textwidth}{lX}\toprule
+ \emph{Frequency} & \emph{Bitrate} (Kbit/s) -- quality 0$\rightarrow$7 \\\midrule
+ 44100Hz stereo & 75, 80, 90, 100, 120, 140, 160, 170 \\
+ 22050Hz stereo & 39, 41, 45, 50, 60, 80, 110, 130 \\
+ 44100Hz mono & 65, 68, 73, 80, 90, 105, 125, 140 \\
+ 22050Hz mono & 35, 38, 40, 45, 50, 60, 75, 90 \\\bottomrule
+ \end{tabularx}
+ \end{center}
+ \end{table}
+}
+
+\opt{SWCODEC}{
+ \section{Format}
+ Choose which format to save your recording in. The available choices are
+ the two uncompressed formats \setting{PCM Wave} and \setting{AIFF}, the
+ losslessly compressed \setting{WavPack} and the lossy
+ \setting{MPEG Layer 3}.
+
+ \section{Encoder Settings}
+ This sets the bitrate when using the \setting{MPEG Layer 3} format. And has
+ no settings for the other formats.
+}
+
+ \section{Frequency}
+ \nopt{e200}{
+ Choose the recording frequency (sample rate).
+ \opt{MASCODEC}{48kHz, 44.1kHz, 32kHz, 24kHz, 22.05kHz, 16kHz}
+ \opt{h1xx,h300}{44.1kHz, 22.05kHz and 11.025kHz}
+ \opt{x5}{88.2kHz, 44.1kHz, 22.05kHz and 11.025kHz}
+ are available. Higher sample rates use up more disk space, but give better
+ sound quality.
+ \opt{SWCODEC}{\note{The 11.025kHz setting is not available when using%
+ \setting{MPEG Layer 3} format.}
+ }%
+ \opt{MASCODEC}{
+ The frequency setting also determines which version of the MPEG standard
+ the sound is recorded using:\\
+ MPEG v1 for 48, 44.1 and 32\\
+ MPEG v2 for 24, 22.05 and 16\\
+ }
+ \opt{recorder,recorderv2fm,h1xx}
+ {\note{You cannot change the sample rate for digital recordings.}
+ }
+ } % nopt e200
+ \opt{e200}{
+ Recordings can only be made at a 22.05kHz frequency (sample rate)
+ on this \dap.
+ } % opt e200
+
+\section{Source}
+ Choose the source of the recording. This can be
+ \opt{recorder,recorderv2fm,h1xx}{\setting{SPDIF (digital)},}%
+ \setting{Mic} or \setting{Line In}.
+ \opt{CONFIG_TUNER}{For recording from the radio see \reference{ref:FMradio}.}
+
+\section{Channels}
+ This allows you to select mono or stereo recording. Please note that
+ for mono recording, only the left channel is recorded. Mono recordings
+ are usually somewhat smaller than stereo.
+
+\opt{MASCODEC}{
+ \section{Independent Frames}
+ The independent frames option tells the \dap{} to encode with the bit
+ reservoir disabled, so the frames are independent of each other. This
+ makes a file easier to edit.
+}
+
+\section{File Split Options}
+ This sub menu contains options for file splitting, which can be used to split
+ up long recordings into manageable pieces. The splits are seamless (frame
+ accurate), no audio is lost at the split point. The break between recordings
+ is only the time required to stop and restart the recording, on the order of
+ 2 -- 4 seconds.
+ \begin{description}
+ \item[Split Measure:]
+ This option controls wether to split the recording when the
+ \setting{Split Filesize} is reached or when the
+ \setting{Split Time} has elapsed.
+
+ \item[What to do when Splitting:]
+ This controls what will happend when the splitting condition is
+ fullfilled the two available options here are
+ \setting{Start a new file} or \setting{Stop recording}.
+
+ \item[Split Time:]
+ Set the time to record between each split, if time is used as
+ \setting{Split Measure}.\\
+ Options (hours:minutes between splits): Off, 00:05, 00:10, 00:15, 00:30,
+ 1:00, 1:14 (74 minute CD), 1:20 (80 minute CD), 2:00, 4:00, 8:00, 10:00,
+ 12:00, 18:00, 24:00.
+
+ \item[Split Filesize:]
+ Set the filesize to record between each split, if filesize is used as
+ \setting{Split Measure}.
+
+ \end{description}
+
+\section{Prerecord Time}
+ This setting buffers a small amount of audio so that when the record button
+ is pressed, the recording will begin from that number of seconds earlier.
+ This is useful for ensuring that a recording begins before a cue that is
+ being waited for.
+
+\section{Clear Recording Directory}
+ Resets the location where the recorded files are saved to the root of your
+ \daps{} drive.
+
+\nopt{ondio}{
+ \section{Clipping Light}
+ Causes the backlight to flash on when clipping has been detected.\\
+ Options: \setting{Off}, \setting{Main unit only},
+ \setting{Main and remote unit}, \setting{Remote unit only}.
+}
+ \section{Trigger}
+ \fixme{Add description of triggered recording.}
+
+\opt{h1xx,h300}{%
+ \section{Automatic Gain Control}
+ The \setting{Automatic Gain Control} has five different presets for
+ automatically controlling the gain while recording.
+ \begin{description}
+ \item[Safety (clip):]
+ This preset will lower the gain when the levels get too high (-1dB)
+ and will never increase gain.
+
+ \item[Live (slow):]
+ This preset is designed to be used for recording of live shows and has
+ quite large headroom for loud parts. It heads for a nominal target peak
+ level of -9dB and will slowly increase or decrease gain to reach it.
+
+ \item[DJ-Set (slow):]
+ This preset heads for a nominal target peak level of -5dB and will
+ slowly increase or decrease gain to reach it.
+
+ \item[Medium:]
+ This preset heads for a nominal target peak level of -6dB and will
+ increase or decrease gain to reach it.
+
+ \item[Voice (fast):]
+ This preset is designed to be used for voice recording and heads for a
+ nominal target peak level of -7dB and will quickly increase or
+ decrease gain to reach it.
+ \end{description}
+
+ \section{AGC clip time}
+ This setting controls how long the level is too loud or soft before the
+ \setting{Automatic Gain Control} kicks in.
+}%
diff --git a/manual/main_menu/recording_screen.tex b/manual/main_menu/recording_screen.tex
index 9f51a60cee..2e6daa556e 100644
--- a/manual/main_menu/recording_screen.tex
+++ b/manual/main_menu/recording_screen.tex
@@ -6,7 +6,8 @@
Entering the \setting{Recording} option in the \setting{Main Menu} brings up
a screen in which you can choose to enter the \setting{Recording Screen} or
-the \setting{Recording Settings} (see below). The \setting{Recording Screen}
+the \setting{Recording Settings} (see \reference{ref:Recordingsettings}).
+The \setting{Recording Screen}
shows the time elapsed and the size of the file being recorded. A peak meter
is present to allow you set gain correctly. There is also a volume setting,
this will only affect the output level of the \dap{} and does \emph{not}
@@ -36,13 +37,14 @@ The controls for this screen are:
\ActionRecExit & Exit \setting{Recording Screen}.\\
& While recording: Stop recording.\\
%
- \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_X5_PAD}{
+ \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_X5_PAD,SANSA_E200_PAD}{
\ActionRecNewfile & Starts recording.\\
& While recording: close the current file and open
a new one.\\
}
%
- \ActionRecMenu & Open \setting{Recording Settings} (see below).\\
+ \ActionRecMenu & Open \setting{Recording Settings} (see
+ \reference{ref:Recordingsettings}).\\
%
\opt{RECORDER_PAD}{
\ActionRecFTwo & Quick menu for recording settings. A quick press will
diff --git a/manual/platform/e200.tex b/manual/platform/e200.tex
index 256b7a34b4..c46d9ac3e8 100644
--- a/manual/platform/e200.tex
+++ b/manual/platform/e200.tex
@@ -44,6 +44,7 @@
\newcommand{\ActionStdQuickScreen}{Long \ButtonDown}
\newcommand{\ActionStdMenu}{\ButtonPower}
\newcommand{\ActionStdOk}{\ButtonSelect{} or \ButtonRight}
+\newcommand{\ActionStdRec}{Long \ButtonRec}
%Button actions, wps context
\newcommand{\ActionWpsPlay}{\ButtonUp}
@@ -59,7 +60,7 @@
\newcommand{\ActionWpsQuickScreen}{Long \ButtonDown}
\newcommand{\ActionWpsMenu}{\ButtonPower}
\newcommand{\ActionWpsContext}{\ButtonDown}
-\newcommand{\ActionWpsBrowse}{Long \ButtonSelect}
+\newcommand{\ActionWpsBrowse}{\ButtonSelect}
\newcommand{\ActionWpsAbSetBNextDir}{\ButtonPower{} + \ButtonRight}
\newcommand{\ActionWpsAbSetAPrevDir}{\ButtonPower{} + \ButtonLeft}
@@ -68,7 +69,7 @@
%Button actions, tree context
\newcommand{\ActionTreeWps}{\ButtonUp}
\newcommand{\ActionTreeStop}{Long \ButtonUp}
-\newcommand{\ActionTreeEnter}{\ButtonSelect}
+\newcommand{\ActionTreeEnter}{\ButtonSelect{} or \ButtonRight}
\newcommand{\ActionTreeParentDirectory}{\ButtonLeft}
%Button actions, YesNo context
diff --git a/manual/rockbox_interface/browsing_and_playing.tex b/manual/rockbox_interface/browsing_and_playing.tex
index 726b7e8499..2c4dc08af3 100644
--- a/manual/rockbox_interface/browsing_and_playing.tex
+++ b/manual/rockbox_interface/browsing_and_playing.tex
@@ -86,6 +86,11 @@ the \setting{Show Files} setting to all.
\ButtonFThree & Switches to the Display Quick Menu \\
%
}
+ %
+ \opt{SANSA_E200_PAD}{
+ \ActionStdRec & Switches to the Recording screen \\
+ %
+ }
\end{btnmap}
\end{table}
diff --git a/manual/rockbox_interface/wps.tex b/manual/rockbox_interface/wps.tex
index 77eea92bdc..00da1e9cc9 100644
--- a/manual/rockbox_interface/wps.tex
+++ b/manual/rockbox_interface/wps.tex
@@ -107,6 +107,9 @@ your WPS (While Playing Screen).
\ActionWpsAbSetBNextDir & Skip to the next directory.\\%
\ActionWpsAbSetAPrevDir & Skip to the previous directory.\\%
}%
+ \opt{SANSA_E200_PAD}{
+ \ActionStdRec & Switches to the Recording screen \\
+ }%
\end{btnmap}
\end{table}