summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--firmware/target/mips/ingenic_jz47xx/xduoo_x3/sadc-xduoo_x3.c18
1 files changed, 14 insertions, 4 deletions
diff --git a/firmware/target/mips/ingenic_jz47xx/xduoo_x3/sadc-xduoo_x3.c b/firmware/target/mips/ingenic_jz47xx/xduoo_x3/sadc-xduoo_x3.c
index ffc6f25a38..b478beceeb 100644
--- a/firmware/target/mips/ingenic_jz47xx/xduoo_x3/sadc-xduoo_x3.c
+++ b/firmware/target/mips/ingenic_jz47xx/xduoo_x3/sadc-xduoo_x3.c
@@ -91,6 +91,9 @@ bool button_hold(void)
return (__gpio_get_pin(PIN_BTN_HOLD) ? true : false);
}
+/* NOTE: Due to how this is wired, button combinations are not allowed
+ unless one of the two buttons is the POWER
+*/
int button_read_device(void)
{
#ifndef BOOTLOADER
@@ -104,8 +107,10 @@ int button_read_device(void)
int btn = BUTTON_NONE;
bool gpio_btn = (__gpio_get_pin(PIN_BTN_POWER) ? false : true);
- REG_SADC_ADCFG = ADCFG_VBAT_SEL + ADCFG_CMD_AUX(1);
- REG_SADC_ADENA = ADENA_VBATEN + ADENA_AUXEN;
+ /* Don't initiate a new request if we have one pending */
+ if (!(REG_SADC_ADENA & (ADENA_VBATEN | ADENA_AUXEN))) {
+ REG_SADC_ADENA = ADENA_VBATEN | ADENA_AUXEN;
+ }
#ifndef BOOTLOADER
if (hold_button != hold_button_old) {
@@ -192,6 +197,11 @@ int _battery_voltage(void)
return (bat_val*BATTERY_SCALE_FACTOR)>>10;
}
+/* 12MHz XTAL
+ /61 = 196 MHz base clock (max is 200, err on the side of safety)
+ /(1+1) = 98.4KHz "us_clk (ie ~10us/tick)
+ /(199+1) = 983.6KHz "ms_clk" (ie ~1ms/tick)
+*/
void adc_init(void)
{
bat_val = 0xfff;
@@ -202,8 +212,8 @@ void adc_init(void)
mdelay(70);
REG_SADC_ADSTATE = 0;
REG_SADC_ADCTRL = ADCTRL_MASK_ALL - ADCTRL_ARDYM - ADCTRL_VRDYM;
- REG_SADC_ADCFG = ADCFG_VBAT_SEL + ADCFG_CMD_AUX(1);
- REG_SADC_ADCLK = (4 << 16) | (1 << 8) | 59; /* 200KHz */
+ REG_SADC_ADCFG = ADCFG_VBAT_SEL | ADCFG_CMD_AUX(1); /* VBAT_SEL is undocumented but required! */
+ REG_SADC_ADCLK = (199 << 16) | (1 << 8) | 61;
system_enable_irq(IRQ_SADC);
}