summaryrefslogtreecommitdiffstats
path: root/firmware/export/config-clip.h
diff options
context:
space:
mode:
Diffstat (limited to 'firmware/export/config-clip.h')
-rw-r--r--firmware/export/config-clip.h176
1 files changed, 176 insertions, 0 deletions
diff --git a/firmware/export/config-clip.h b/firmware/export/config-clip.h
new file mode 100644
index 0000000000..b6ffccecab
--- /dev/null
+++ b/firmware/export/config-clip.h
@@ -0,0 +1,176 @@
+/*
+ * This config file is for the Sandisk Sansa e200
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 50
+#define MODEL_NAME "Sandisk Sansa Clip"
+#define FIRMWARE_OFFSET_FILE_DATA 0
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+#if 0
+#define HW_SAMPR_CAPS (SAMPR_CAP_44)
+
+/* define this if you have recording possibility */
+#define HAVE_RECORDING
+
+#define REC_SAMPR_CAPS (SAMPR_CAP_22)
+#define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */
+#define REC_SAMPR_DEFAULT SAMPR_22
+
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+ explicitly if different */
+#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
+#endif
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a light associated with the buttons */
+#define HAVE_BUTTON_LIGHT
+
+/* define this if you have access to the quickscreen */
+//#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+//#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+//#define HAVE_TAGCACHE
+
+/* LCD dimensions */
+#define LCD_WIDTH 128
+#define LCD_HEIGHT 64
+#define LCD_DEPTH 1
+#define LCD_PIXELFORMAT VERTICAL_PACKING
+
+/* define this if you have LCD enable function */
+#define HAVE_LCD_ENABLE
+
+#ifndef BOOTLOADER
+
+/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
+ should be defined as well. */
+//#define HAVE_LCD_SLEEP
+//#define HAVE_LCD_SLEEP_SETTING
+#endif
+
+/* define this if you can flip your LCD */
+//#define HAVE_LCD_FLIP
+
+/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
+
+#define CONFIG_KEYPAD SANSA_CLIP_PAD
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+/* There is no hardware tone control */
+#define HAVE_SW_TONE_CONTROLS
+
+#define HAVE_AS3525
+
+/* define this if you have a real-time clock */
+#ifndef BOOTLOADER
+//#define CONFIG_RTC RTC_AS3525
+#endif
+
+/* Define this if you have a software controlled poweroff */
+//#define HAVE_SW_POWEROFF
+
+#define HAVE_FAT16SUPPORT
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0
+//#define CODEC_SIZE 0x80000
+
+/* The number of bytes reserved for loadable plugins */
+//#define PLUGIN_BUFFER_SIZE 0x80000
+
+#define AB_REPEAT_ENABLE 1
+
+/* FM Tuner */
+//#define CONFIG_TUNER LV24020LP
+//#define HAVE_TUNER_PWR_CTRL
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+#define HAVE_BACKLIGHT_BRIGHTNESS
+
+/* define this if you have a flash memory storage */
+#define HAVE_FLASH_STORAGE
+
+/* define this if the flash memory uses the SecureDigital Memory Card protocol */
+#define HAVE_ATA_SD
+
+#define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 0 /* capacity increment */
+#define BATTERY_TYPES_COUNT 1 /* only one type */
+
+/* Hardware controlled charging? FIXME */
+#define CONFIG_CHARGING CHARGING_SIMPLE
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+/** Non-simulator section **/
+#ifndef SIMULATOR
+
+/* Define this if you have a PortalPlayer PP5024 */
+#define CONFIG_CPU AS3525
+
+/* Define this if you want to use the PP5024 i2c interface */
+#define CONFIG_I2C I2C_AS3525
+
+/* define this if the hardware can be powered off while charging */
+/* Sansa can't be powered off while charging */
+/* #define HAVE_POWEROFF_WHILE_CHARGING */
+
+/* The start address index for ROM builds */
+#define ROM_START 0x00000000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ 250000000
+
+/* Type of LCD */
+#define CONFIG_LCD LCD_SSD1303
+
+#ifndef BOOTLOADER
+#define HAVE_MULTIVOLUME
+#define HAVE_HOTSWAP
+
+/* USB On-the-go */
+#define CONFIG_USBOTG USBOTG_ARC
+
+/* enable these for the experimental usb stack */
+#define HAVE_USBSTACK
+#define USB_VENDOR_ID 0x0781
+#define USB_PRODUCT_ID 0x7421
+#endif /* BOOTLOADER */
+
+/* Virtual LED (icon) */
+#define CONFIG_LED LED_VIRTUAL
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define ICODE_ATTR_TREMOR_NOT_MDCT
+
+#define INCLUDE_TIMEOUT_API
+
+#endif /* SIMULATOR */
+
+/** Port-specific settings **/
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING 1
+#define MAX_BRIGHTNESS_SETTING 12
+#define DEFAULT_BRIGHTNESS_SETTING 6
+
+/* Default recording levels */
+#define DEFAULT_REC_MIC_GAIN 23
+#define DEFAULT_REC_LEFT_GAIN 23
+#define DEFAULT_REC_RIGHT_GAIN 23