1 files changed, 106 insertions, 0 deletions
diff --git a/firmware/export/config-lyre_proto1.h b/firmware/export/config-lyre_proto1.h
new file mode 100644
index 0000000000..d157f5be2d
--- /dev/null
+++ b/firmware/export/config-lyre_proto1.h
@@ -0,0 +1,106 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ *
+ *
+ * Copyright (C) 2009 by Jorge Pinto
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+/*
+ * This config file is for the Lyre prototype 1.
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+#define CONFIG_SDRAM_START 0x20000000
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 130
+
+/* define this if the flash memory uses the
+ * SecureDigital Memory Card protocol */
+#define CONFIG_STORAGE STORAGE_SD
+#define HAVE_FLASH_STORAGE
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+#define CONFIG_LCD LCD_LYRE_PROTO1
+
+/* LCD dimensions */
+#define LCD_WIDTH  128
+#define LCD_HEIGHT 128
+/* The LCD used is just rgb444, 64 colours. We do a bit conversion on LCD
+ * drivers. */
+#define LCD_DEPTH  16   /* 65536 colours */
+#define LCD_PIXELFORMAT RGB565 /* rgb565 */
+
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+#define CONFIG_KEYPAD LYRE_PROTO1_PAD
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x100000
+
+/* Lyre prototype 1 do not use I2C, just SPI */
+#define CONFIG_I2C I2C_NONE
+
+/* Define this if you have the TLV320 audio codec -> controlled by the DSP */
+#define HAVE_TLV320
+
+/* TLV320 has no tone controls, so we use the software ones */
+#define HAVE_SW_TONE_CONTROLS
+
+#define BATTERY_CAPACITY_DEFAULT 1100 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 500        /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 2500        /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 100         /* capacity increment */
+#define BATTERY_TYPES_COUNT  1          /* only one type */
+
+#ifndef SIMULATOR
+
+#define CONFIG_CPU AT91SAM9260
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ 198656000
+#define MCK_FREQ 99328000
+#define SLOW_CLOCK 32768
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+#define BOOTFILE_EXT "lyre_proto1"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#endif