diff options
Diffstat (limited to 'firmware/export/config')
| -rw-r--r-- | firmware/export/config/mpiohd200.h | 32 |
1 files changed, 13 insertions, 19 deletions
diff --git a/firmware/export/config/mpiohd200.h b/firmware/export/config/mpiohd200.h index 465154a4bd..b9e9b11e2d 100644 --- a/firmware/export/config/mpiohd200.h +++ b/firmware/export/config/mpiohd200.h @@ -14,26 +14,18 @@ #define ATA_SWAP_WORDS /* define this if you have recording possibility */ -/* not implemented yet - * #define HAVE_RECORDING - */ - +#define HAVE_RECORDING /* Define bitmask of input sources - recordable bitmask can be defined * explicitly if different - * not implemented yet */ - #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO) - /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) -/* define the bitmask of recording sample rates - * not implemented yet - *#define REC_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) - */ +/* define the bitmask of recording sample rates */ +#define REC_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP @@ -114,9 +106,17 @@ #define CONFIG_TUNER_XTAL 32768 -/* we have WM8750 codec in I2S slave mode */ +/* we have WM8750 codec in I2S master mode */ #define HAVE_WM8750 -#define CODEC_SLAVE + +/* clocking setup based on 11.2896 MHz master clock + * provided to the codec by MCU + * WM8750L Datasheet Table 40, page 46 + */ +#define CODEC_SRCTRL_11025HZ (0x18 << 1) +#define CODEC_SRCTRL_22050HZ (0x1A << 1) +#define CODEC_SRCTRL_44100HZ (0x10 << 1) +#define CODEC_SRCTRL_88200HZ (0x1E << 1) #define BATTERY_CAPACITY_DEFAULT 950 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 950 /* min. capacity selectable */ @@ -142,12 +142,6 @@ /* Define this if you want to use coldfire's i2c interface */ #define CONFIG_I2C I2C_COLDFIRE -/* OF resets device instead of poweroff while charging - * this triggers bootloader code which takes care of charging. - * I have feeling that powering off while charging may cause - * partition table corruption I am experiencing from time to time - */ - /* define this if the hardware can be powered off while charging */ /* #define HAVE_POWEROFF_WHILE_CHARGING */ |