diff options
Diffstat (limited to 'firmware/export')
| -rw-r--r-- | firmware/export/config-clip.h | 13 | ||||
| -rw-r--r-- | firmware/export/config-e200v2.h | 202 | ||||
| -rw-r--r-- | firmware/export/config-m200v2.h | 127 | ||||
| -rw-r--r-- | firmware/export/config.h | 7 |
4 files changed, 344 insertions, 5 deletions
diff --git a/firmware/export/config-clip.h b/firmware/export/config-clip.h index 0685e45fd9..d2c2b51d18 100644 --- a/firmware/export/config-clip.h +++ b/firmware/export/config-clip.h @@ -4,7 +4,7 @@ #define TARGET_TREE /* this target is using the target tree system */ /* For Rolo and boot loader */ -#define MODEL_NUMBER 50 +#define MODEL_NUMBER 40 #define MODEL_NAME "Sandisk Sansa Clip" #define FIRMWARE_OFFSET_FILE_DATA 0 #define FIRMWARE_OFFSET_FILE_CRC 0 @@ -69,11 +69,9 @@ /* There is no hardware tone control */ #define HAVE_SW_TONE_CONTROLS -#define HAVE_AS3525 - /* define this if you have a real-time clock */ #ifndef BOOTLOADER -//#define CONFIG_RTC RTC_AS3525 +#define CONFIG_RTC RTC_AS3525 #endif /* Define this if you have a software controlled poweroff */ @@ -148,7 +146,7 @@ /* enable these for the experimental usb stack */ #define HAVE_USBSTACK #define USB_VENDOR_ID 0x0781 -#define USB_PRODUCT_ID 0x7421 +#define USB_PRODUCT_ID 0x7433 #endif /* BOOTLOADER */ /* Virtual LED (icon) */ @@ -157,6 +155,11 @@ /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ +#define MI4_FORMAT +#define BOOTFILE_EXT "sansa" +#define BOOTFILE "rockbox." BOOTFILE_EXT +#define BOOTDIR "/.rockbox" + #define ICODE_ATTR_TREMOR_NOT_MDCT #define INCLUDE_TIMEOUT_API diff --git a/firmware/export/config-e200v2.h b/firmware/export/config-e200v2.h new file mode 100644 index 0000000000..ac41cd33c4 --- /dev/null +++ b/firmware/export/config-e200v2.h @@ -0,0 +1,202 @@ +/* + * This config file is for the Sandisk Sansa e200v2 + */ +#define TARGET_TREE /* this target is using the target tree system */ + +/* For Rolo and boot loader */ +#define MODEL_NUMBER 41 +#define MODEL_NAME "Sandisk Sansa e200v2 series" + +#define HW_SAMPR_CAPS (SAMPR_CAP_44) + +/* define this if you have recording possibility */ +#define HAVE_RECORDING + +#define REC_SAMPR_CAPS (SAMPR_CAP_22) +#define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */ +#define REC_SAMPR_DEFAULT SAMPR_22 + +/* Define bitmask of input sources - recordable bitmask can be defined + explicitly if different */ +#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO) + +/* define this if you have a bitmap LCD display */ +#define HAVE_LCD_BITMAP + +/* define this if you have a colour LCD */ +#define HAVE_LCD_COLOR + +/* define this if you want album art for this target */ +#define HAVE_ALBUMART + +/* define this if you have a light associated with the buttons */ +#define HAVE_BUTTON_LIGHT + +/* define this if you have access to the quickscreen */ +#define HAVE_QUICKSCREEN + +/* define this if you have access to the pitchscreen */ +#define HAVE_PITCHSCREEN + +/* define this if you would like tagcache to build on this target */ +#define HAVE_TAGCACHE + +/* LCD dimensions */ +#define LCD_WIDTH 176 +#define LCD_HEIGHT 220 +#define LCD_DEPTH 16 /* 65536 colours */ +#define LCD_PIXELFORMAT RGB565 /* rgb565 */ + +/* define this if you have LCD enable function */ +#define HAVE_LCD_ENABLE + +/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE + should be defined as well. */ +#define HAVE_LCD_SLEEP +#define HAVE_LCD_SLEEP_SETTING + +/* define this if you can flip your LCD */ +#define HAVE_LCD_FLIP + +/* define this if you can invert the colours on your LCD */ +#define HAVE_LCD_INVERT + +/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */ + +#define CONFIG_KEYPAD SANSA_E200_PAD + +/* Define this if you do software codec */ +#define CONFIG_CODEC SWCODEC +/* There is no hardware tone control */ +#define HAVE_SW_TONE_CONTROLS + +/* Define this if you have an AMS AS3525 */ +#define HAVE_AS3525 + +/* define this if you have a real-time clock */ +#ifndef BOOTLOADER +#define CONFIG_RTC RTC_AS3525 +#endif + +/* Define this if you have a software controlled poweroff */ +#define HAVE_SW_POWEROFF + +/* Some Sansa E200s seem to be FAT16 formatted */ +#define HAVE_FAT16SUPPORT + +/* The number of bytes reserved for loadable codecs */ +#define CODEC_SIZE 0x100000 + +/* The number of bytes reserved for loadable plugins */ +#define PLUGIN_BUFFER_SIZE 0x80000 + +#define AB_REPEAT_ENABLE 1 + +/* FM Tuner */ +/* #define CONFIG_TUNER LV24020LP */ +/* #define HAVE_TUNER_PWR_CTRL */ + +/* Define this for LCD backlight available */ +#define HAVE_BACKLIGHT +#define HAVE_BACKLIGHT_BRIGHTNESS + +/* define this if the unit uses a scrollwheel for navigation */ +#define HAVE_SCROLLWHEEL +/* define from which rotation speed [degree/sec] on the acceleration starts */ +#define WHEEL_ACCEL_START 540 +/* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */ +#define WHEEL_ACCELERATION 1 + +/* define this if you have a flash memory storage */ +#define HAVE_FLASH_STORAGE + +/* define this if the flash memory uses the SecureDigital Memory Card protocol */ +#define HAVE_ATA_SD + +#define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */ +#define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */ +#define BATTERY_CAPACITY_INC 0 /* capacity increment */ +#define BATTERY_TYPES_COUNT 1 /* only one type */ + +/* Hardware controlled charging? FIXME */ +#define CONFIG_CHARGING CHARGING_SIMPLE + +/* define this if the unit can be powered or charged via USB */ +#define HAVE_USB_POWER + +/** Non-simulator section **/ +#ifndef SIMULATOR + +/* Define this if you have an AMS AS3525*/ +#define CONFIG_CPU AS3525 + +/* Define this if you want to use the AS2525 i2c interface */ +#define CONFIG_I2C I2C_AS3525 + +/* define this if the hardware can be powered off while charging */ +/* Sansa can't be powered off while charging */ +/* #define HAVE_POWEROFF_WHILE_CHARGING */ + +/* The start address index for ROM builds */ +#define ROM_START 0x00000000 + +/* Define this to the CPU frequency */ +#define CPU_FREQ 75000000 + +/* Type of LCD TODO: hopefully the same as the x5 but check this*/ +#define CONFIG_LCD LCD_X5 + +/* Offset ( in the firmware file's header ) to the file CRC and data. These are + only used when loading the old format rockbox.e200 file */ +#define FIRMWARE_OFFSET_FILE_CRC 0x0 +#define FIRMWARE_OFFSET_FILE_DATA 0x8 + +#ifndef BOOTLOADER +#define HAVE_MULTIVOLUME +#define HAVE_HOTSWAP +#endif + +/* #define USB_IPODSTYLE */ + +/* USB On-the-go */ +#define CONFIG_USBOTG USBOTG_AS3525 + +/* enable these for the experimental usb stack */ +#define HAVE_USBSTACK +#define USB_VENDOR_ID 0x0781 +#define USB_PRODUCT_ID 0x7423 + +/* Virtual LED (icon) */ +#define CONFIG_LED LED_VIRTUAL + +/* Define this if you have adjustable CPU frequency */ +#define HAVE_ADJUSTABLE_CPU_FREQ + +#define MI4_FORMAT +#define BOOTFILE_EXT "sansa" +#define BOOTFILE "rockbox." BOOTFILE_EXT +#define BOOTDIR "/.rockbox" + +#define ICODE_ATTR_TREMOR_NOT_MDCT + +#define INCLUDE_TIMEOUT_API + +#endif /* SIMULATOR */ + +/** Port-specific settings **/ + +/* Main LCD backlight brightness range and defaults */ +#define MIN_BRIGHTNESS_SETTING 1 +#define MAX_BRIGHTNESS_SETTING 12 +#define DEFAULT_BRIGHTNESS_SETTING 6 + +/* Default recording levels */ +#define DEFAULT_REC_MIC_GAIN 23 +#define DEFAULT_REC_LEFT_GAIN 23 +#define DEFAULT_REC_RIGHT_GAIN 23 + +#ifdef E200R_INSTALLER +#define IRAMORIG 0x40004000 +#endif + diff --git a/firmware/export/config-m200v2.h b/firmware/export/config-m200v2.h new file mode 100644 index 0000000000..9386a157f6 --- /dev/null +++ b/firmware/export/config-m200v2.h @@ -0,0 +1,127 @@ +/* + * This config file is for the Sansa M200 series + */ +#define TARGET_TREE /* this target is using the target tree system */ + +/* For Rolo and boot loader */ +#define MODEL_NUMBER 42 + +#define MODEL_NAME "Sandisk Sansa m200 series" + +/* Enable FAT16 support */ +#define HAVE_FAT16SUPPORT + +/* define this if you have recording possibility */ +//#define HAVE_RECORDING + +/* Define bitmask of input sources - recordable bitmask can be defined + explicitly if different */ +//#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF) + +/* define this if you have a bitmap LCD display */ +#define HAVE_LCD_BITMAP + +/* define this if you can flip your LCD */ +#define HAVE_LCD_FLIP + +/* define this if you can invert the colours on your LCD */ +#define HAVE_LCD_INVERT + +/* define this if you have access to the quickscreen */ +#define HAVE_QUICKSCREEN +/* define this if you have access to the pitchscreen */ +#define HAVE_PITCHSCREEN + +/* define this if you would like tagcache to build on this target */ +#define HAVE_TAGCACHE + +/* define this if you have a flash memory storage */ +#define HAVE_FLASH_STORAGE + +/* LCD dimensions */ +#define LCD_WIDTH 128 +#define LCD_HEIGHT 64 +#define LCD_DEPTH 1 + +#define LCD_PIXELFORMAT VERTICAL_PACKING + +/* define this to indicate your device's keypad */ +#define CONFIG_KEYPAD SANSA_M200_PAD + +/* define this if you have a real-time clock */ +#define CONFIG_RTC RTC_AS3525 + +/* define this if you have RTC RAM available for settings */ +//#define HAVE_RTC_RAM + +/* Define this if you have a software controlled poweroff */ +#define HAVE_SW_POWEROFF + +/* The number of bytes reserved for loadable codecs */ +#define CODEC_SIZE 0x38000 + +/* The number of bytes reserved for loadable plugins */ +#define PLUGIN_BUFFER_SIZE 0x10000 + +#define AB_REPEAT_ENABLE 1 + +/* Define this if you do software codec */ +#define CONFIG_CODEC SWCODEC + +/* Define this if you have the TLV320 audio codec */ +/*#define HAVE_TLV320*/ + +/* TLV320 has no tone controls, so we use the software ones */ +#define HAVE_SW_TONE_CONTROLS + +/* Define this for LCD backlight available */ +#define HAVE_BACKLIGHT + +#define CONFIG_I2C I2C_AS3525 + +#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */ +#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */ +#define BATTERY_CAPACITY_INC 50 /* capacity increment */ +#define BATTERY_TYPES_COUNT 1 /* only one type */ + +/* define this if the unit should not shut down on low battery. */ +#define NO_LOW_BATTERY_SHUTDOWN + +#ifndef SIMULATOR + +/* Define this if you have an AMS AS3525 */ +#define CONFIG_CPU AS3525 + +/* Define this if you have ATA power-off control */ +#define HAVE_ATA_POWER_OFF + +/* Define this to the CPU frequency */ +#define CPU_FREQ 120000000 + +/* Offset ( in the firmware file's header ) to the file CRC */ +#define FIRMWARE_OFFSET_FILE_CRC 0 + +/* Offset ( in the firmware file's header ) to the real data */ +#define FIRMWARE_OFFSET_FILE_DATA 8 + +/* Software controlled LED */ +#define CONFIG_LED LED_VIRTUAL + +#define CONFIG_LCD LCD_SSD1815 + +#define BOOTFILE_EXT "sansa" +#define BOOTFILE "rockbox." BOOTFILE_EXT +#define BOOTDIR "/" + +#define IBSS_ATTR_VOICE_STACK +#define ICODE_ATTR_TREMOR_NOT_MDCT +#define ICODE_ATTR_TREMOR_MDCT +#define ICODE_ATTR_FLAC +#define IBSS_ATTR_FLAC_DECODED0 +#define ICONST_ATTR_MPA_HUFFMAN +#define IBSS_ATTR_MPC_SAMPLE_BUF +#define ICODE_ATTR_ALAC +#define IBSS_ATTR_SHORTEN_DECODED0 + +#endif /* SIMULATOR */ diff --git a/firmware/export/config.h b/firmware/export/config.h index 7d36289ff2..73ecca1495 100644 --- a/firmware/export/config.h +++ b/firmware/export/config.h @@ -173,6 +173,7 @@ #define I2C_DM320 12 /* DM320 style */ #define I2C_S5L8700 13 #define I2C_JZ47XX 14 /* Ingenic Jz47XX style */ +#define I2C_AS3525 15 /* CONFIG_LED */ #define LED_REAL 1 /* SW controlled LED (Archos recorders, player) */ @@ -199,6 +200,7 @@ #define RTC_S5L8700 14 #define RTC_S35390A 15 #define RTC_JZ47XX 16 /* Ingenic Jz47XX */ +#define RTC_AS3525 17 /* USB On-the-go */ #define USBOTG_ISP1362 1362 /* iriver H300 */ @@ -206,6 +208,7 @@ #define USBOTG_M5636 5636 /* iAudio X5 */ #define USBOTG_ARC 5020 /* PortalPlayer 502x */ #define USBOTG_JZ4740 4740 /* Ingenic Jz4740/Jz4732 */ +#define USBOTG_AS3525 3525 /* AMS AS3525 */ /* Multiple cores */ #define CPU 0 @@ -306,6 +309,10 @@ #include "config-ondavx767.h" #elif defined(SANSA_CLIP) #include "config-clip.h" +#elif defined(SANSA_E200V2) +#include "config-e200v2.h" +#elif defined(SANSA_M200V2) +#include "config-m200v2.h" #else /* no known platform */ #endif |