diff options
Diffstat (limited to 'firmware/target/arm/pbell')
| -rw-r--r-- | firmware/target/arm/pbell/vibe500/lcd-as-vibe500.S | 556 | ||||
| -rw-r--r-- | firmware/target/arm/pbell/vibe500/lcd-vibe500.c | 75 |
2 files changed, 631 insertions, 0 deletions
diff --git a/firmware/target/arm/pbell/vibe500/lcd-as-vibe500.S b/firmware/target/arm/pbell/vibe500/lcd-as-vibe500.S new file mode 100644 index 0000000000..e03011c168 --- /dev/null +++ b/firmware/target/arm/pbell/vibe500/lcd-as-vibe500.S @@ -0,0 +1,556 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id:$ + * + * Copyright (C) 2007-2008 by Michael Sevakis + * Adapted for the Packard Bell Vibe 500 by Szymon Dziok + * + * Packard Bell Vibe 500 LCD assembly routines + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#include "config.h" +#include "cpu.h" + +/**************************************************************************** + * void lcd_write_yuv420_lines(unsigned char const * const src[3], + * int width, + * int stride); + * + * |R| |1.000000 -0.000001 1.402000| |Y'| + * |G| = |1.000000 -0.334136 -0.714136| |Pb| + * |B| |1.000000 1.772000 0.000000| |Pr| + * Scaled, normalized, rounded and tweaked to yield RGB 565: + * |R| |74 0 101| |Y' - 16| >> 9 + * |G| = |74 -24 -51| |Cb - 128| >> 8 + * |B| |74 128 0| |Cr - 128| >> 9 + * + * Write four RGB565 pixels in the following order on each loop: + * 1 3 + > down + * 2 4 \/ left + */ + .section .icode, "ax", %progbits + .align 2 + .global lcd_write_yuv420_lines + .type lcd_write_yuv420_lines, %function +lcd_write_yuv420_lines: + @ r0 = yuv_src + @ r1 = width + @ r2 = stride + stmfd sp!, { r4-r11, lr } @ save non-scratch + ldmia r0, { r4, r5, r6 } @ r4 = yuv_src[0] = Y'_p + @ r5 = yuv_src[1] = Cb_p + @ r6 = yuv_src[2] = Cr_p + @ + ldr r0, =LCD1_BASE @ + @ + sub r2, r2, #1 @ Adjust stride because of increment +10: @ loop line @ + ldrb r7, [r4], #1 @ r7 = *Y'_p++; + ldrb r8, [r5], #1 @ r8 = *Cb_p++; + ldrb r9, [r6], #1 @ r9 = *Cr_p++; + @ + sub r7, r7, #16 @ r7 = Y = (Y' - 16)*74 + add r12, r7, r7, asl #2 @ actually (Y' - 16)*37 and shift right + add r7, r12, r7, asl #5 @ by one less when adding - same for all + @ + sub r8, r8, #128 @ Cb -= 128 + sub r9, r9, #128 @ Cr -= 128 + @ + add r10, r9, r9, asl #1 @ r10 = Cr*51 + Cb*24 + add r10, r10, r10, asl #4 @ + add r10, r10, r8, asl #3 @ + add r10, r10, r8, asl #4 @ + @ + add r11, r9, r9, asl #2 @ r9 = Cr*101 + add r11, r11, r9, asl #5 @ + add r9, r11, r9, asl #6 @ + @ + add r8, r8, #2 @ r8 = bu = (Cb*128 + 128) >> 8 + mov r8, r8, asr #2 @ + add r9, r9, #256 @ r9 = rv = (r8 + 256) >> 9 + mov r9, r9, asr #9 @ + rsb r10, r10, #128 @ r10 = guv = (-r9 + 128) >> 8 + mov r10, r10, asr #8 @ + @ compute R, G, and B + add r3, r8, r7, asr #8 @ r3 = b = (Y >> 9) + bu + add r11, r9, r7, asr #8 @ r11 = r = (Y >> 9) + rv + add r7, r10, r7, asr #7 @ r7 = g = (Y >> 8) + guv + @ + orr r12, r3, r11 @ check if clamping is needed... + orr r12, r12, r7, asr #1 @ ...at all + cmp r12, #31 @ + bls 15f @ no clamp @ + cmp r3, #31 @ clamp b + mvnhi r3, r3, asr #31 @ + andhi r3, r3, #31 @ + cmp r11, #31 @ clamp r + mvnhi r11, r11, asr #31 @ + andhi r11, r11, #31 @ + cmp r7, #63 @ clamp g + mvnhi r7, r7, asr #31 @ + andhi r7, r7, #63 @ +15: @ no clamp @ + @ + ldrb r12, [r4, r2] @ r12 = Y' = *(Y'_p + stride) + @ + orr r3, r3, r11, lsl #11 @ r3 = b | (r << 11) + orr r3, r3, r7, lsl #5 @ r3 |= (g << 5) + @ + movs r7, r3, lsr #8 @ store pixel +20: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 20b @ + str r7, [r0, #0x10] @ +25: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 25b @ + str r3, [r0, #0x10] @ + @ + sub r7, r12, #16 @ r7 = Y = (Y' - 16)*74 + add r12, r7, r7, asl #2 @ + add r7, r12, r7, asl #5 @ + @ compute R, G, and B + add r3, r8, r7, asr #8 @ r3 = b = (Y >> 9) + bu + add r11, r9, r7, asr #8 @ r11 = r = (Y >> 9) + rv + add r7, r10, r7, asr #7 @ r7 = g = (Y >> 8) + guv + @ + orr r12, r3, r11 @ check if clamping is needed... + orr r12, r12, r7, asr #1 @ ...at all + cmp r12, #31 @ + bls 15f @ no clamp @ + cmp r3, #31 @ clamp b + mvnhi r3, r3, asr #31 @ + andhi r3, r3, #31 @ + cmp r11, #31 @ clamp r + mvnhi r11, r11, asr #31 @ + andhi r11, r11, #31 @ + cmp r7, #63 @ clamp g + mvnhi r7, r7, asr #31 @ + andhi r7, r7, #63 @ +15: @ no clamp @ + @ + ldrb r12, [r4], #1 @ r12 = Y' = *(Y'_p++) + @ + orr r3, r3, r11, lsl #11 @ r3 = b | (r << 11) + orr r3, r3, r7, lsl #5 @ r3 |= (g << 5) + @ + movs r7, r3, lsr #8 @ store pixel +20: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 20b @ + str r7, [r0, #0x10] @ +25: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 25b @ + str r3, [r0, #0x10] @ + @ + sub r7, r12, #16 @ r7 = Y = (Y' - 16)*74 + add r12, r7, r7, asl #2 @ + add r7, r12, r7, asl #5 @ + @ compute R, G, and B + add r3, r8, r7, asr #8 @ r3 = b = (Y >> 9) + bu + add r11, r9, r7, asr #8 @ r11 = r = (Y >> 9) + rv + add r7, r10, r7, asr #7 @ r7 = g = (Y >> 8) + guv + @ + orr r12, r3, r11 @ check if clamping is needed... + orr r12, r12, r7, asr #1 @ ...at all + cmp r12, #31 @ + bls 15f @ no clamp @ + cmp r3, #31 @ clamp b + mvnhi r3, r3, asr #31 @ + andhi r3, r3, #31 @ + cmp r11, #31 @ clamp r + mvnhi r11, r11, asr #31 @ + andhi r11, r11, #31 @ + cmp r7, #63 @ clamp g + mvnhi r7, r7, asr #31 @ + andhi r7, r7, #63 @ +15: @ no clamp @ + @ + ldrb r12, [r4, r2] @ r12 = Y' = *(Y'_p + stride) + @ + orr r3, r3, r7, lsl #5 @ r3 = b | (g << 5) + orr r3, r3, r11, lsl #11 @ r3 |= (r << 11) + @ + movs r7, r3, lsr #8 @ store pixel +20: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 20b @ + str r7, [r0, #0x10] @ +25: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 25b @ + str r3, [r0, #0x10] @ + @ + sub r7, r12, #16 @ r7 = Y = (Y' - 16)*74 + add r12, r7, r7, asl #2 @ + add r7, r12, r7, asl #5 @ + @ compute R, G, and B + add r3, r8, r7, asr #8 @ r3 = b = (Y >> 9) + bu + add r11, r9, r7, asr #8 @ r11 = r = (Y >> 9) + rv + add r7, r10, r7, asr #7 @ r7 = g = (Y >> 8) + guv + @ + orr r12, r3, r11 @ check if clamping is needed... + orr r12, r12, r7, asr #1 @ ...at all + cmp r12, #31 @ + bls 15f @ no clamp @ + cmp r3, #31 @ clamp b + mvnhi r3, r3, asr #31 @ + andhi r3, r3, #31 @ + cmp r11, #31 @ clamp r + mvnhi r11, r11, asr #31 @ + andhi r11, r11, #31 @ + cmp r7, #63 @ clamp g + mvnhi r7, r7, asr #31 @ + andhi r7, r7, #63 @ +15: @ no clamp @ + @ + orr r3, r3, r11, lsl #11 @ r3 = b | (r << 11) + orr r3, r3, r7, lsl #5 @ r3 |= (g << 5) + @ + movs r7, r3, lsr #8 @ store pixel +20: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 20b @ + str r7, [r0, #0x10] @ +25: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 25b @ + str r3, [r0, #0x10] @ + @ + subs r1, r1, #2 @ subtract block from width + bgt 10b @ loop line @ + @ + ldmpc regs=r4-r11 @ restore registers and return + .ltorg @ dump constant pool + .size lcd_write_yuv420_lines, .-lcd_write_yuv420_lines + + +/**************************************************************************** + * void lcd_write_yuv420_lines_odither(unsigned char const * const src[3], + * int width, + * int stride, + * int x_screen, + * int y_screen); + * + * |R| |1.000000 -0.000001 1.402000| |Y'| + * |G| = |1.000000 -0.334136 -0.714136| |Pb| + * |B| |1.000000 1.772000 0.000000| |Pr| + * Red scaled at twice g & b but at same precision to place it in correct + * bit position after multiply and leave instruction count lower. + * |R| |258 0 408| |Y' - 16| + * |G| = |149 -49 -104| |Cb - 128| + * |B| |149 258 0| |Cr - 128| + * + * Write four RGB565 pixels in the following order on each loop: + * 1 3 + > down + * 2 4 \/ left + * + * Kernel pattern (raw|use order): + * 5 3 4 2 row0 row2 > down + * 1 7 0 6 | 5 1 3 7 4 0 2 6 col0 left + * 4 2 5 3 | 4 0 2 6 5 1 3 7 col2 \/ + * 0 6 1 7 + */ + .section .icode, "ax", %progbits + .align 2 + .global lcd_write_yuv420_lines_odither + .type lcd_write_yuv420_lines_odither, %function +lcd_write_yuv420_lines_odither: + @ r0 = yuv_src + @ r1 = width + @ r2 = stride + @ r3 = x_screen + @ [sp] = y_screen + stmfd sp!, { r4-r11, lr } @ save non-scratch + ldmia r0, { r4, r5, r6 } @ r4 = yuv_src[0] = Y'_p + @ r5 = yuv_src[1] = Cb_p + @ r6 = yuv_src[2] = Cr_p + @ + ldr r0, [sp, #36] @ Line up pattern and kernel quadrant + eor r14, r3, r0 @ + and r14, r14, #0x2 @ + mov r14, r14, lsl #6 @ 0x00 or 0x80 + @ + ldr r0, =LCD1_BASE @ + @ + sub r2, r2, #1 @ Adjust stride because of increment +10: @ loop line @ + @ + ldrb r7, [r4], #1 @ r7 = *Y'_p++; + ldrb r8, [r5], #1 @ r8 = *Cb_p++; + ldrb r9, [r6], #1 @ r9 = *Cr_p++; + @ + eor r14, r14, #0x80 @ flip pattern quadrant + @ + sub r7, r7, #16 @ r7 = Y = (Y' - 16)*149 + add r12, r7, r7, asl #2 @ + add r12, r12, r12, asl #4 @ + add r7, r12, r7, asl #6 @ + @ + sub r8, r8, #128 @ Cb -= 128 + sub r9, r9, #128 @ Cr -= 128 + @ + add r10, r8, r8, asl #4 @ r10 = guv = Cr*104 + Cb*49 + add r10, r10, r8, asl #5 @ + add r10, r10, r9, asl #3 @ + add r10, r10, r9, asl #5 @ + add r10, r10, r9, asl #6 @ + @ + mov r8, r8, asl #1 @ r8 = bu = Cb*258 + add r8, r8, r8, asl #7 @ + @ + add r9, r9, r9, asl #1 @ r9 = rv = Cr*408 + add r9, r9, r9, asl #4 @ + mov r9, r9, asl #3 @ + @ + @ compute R, G, and B + add r3, r8, r7 @ r3 = b' = Y + bu + add r11, r9, r7, asl #1 @ r11 = r' = Y*2 + rv + rsb r7, r10, r7 @ r7 = g' = Y + guv + @ + @ r8 = bu, r9 = rv, r10 = guv + @ + sub r12, r3, r3, lsr #5 @ r3 = 31/32*b + b/256 + add r3, r12, r3, lsr #8 @ + @ + sub r12, r11, r11, lsr #5 @ r11 = 31/32*r + r/256 + add r11, r12, r11, lsr #8 @ + @ + sub r12, r7, r7, lsr #6 @ r7 = 63/64*g + g/256 + add r7, r12, r7, lsr #8 @ + @ + add r12, r14, #0x200 @ + @ + add r3, r3, r12 @ b = r3 + delta + add r11, r11, r12, lsl #1 @ r = r11 + delta*2 + add r7, r7, r12, lsr #1 @ g = r7 + delta/2 + @ + orr r12, r3, r11, asr #1 @ check if clamping is needed... + orr r12, r12, r7 @ ...at all + movs r12, r12, asr #15 @ + beq 15f @ no clamp @ + movs r12, r3, asr #15 @ clamp b + mvnne r3, r12, lsr #15 @ + andne r3, r3, #0x7c00 @ mask b only if clamped + movs r12, r11, asr #16 @ clamp r + mvnne r11, r12, lsr #16 @ + movs r12, r7, asr #15 @ clamp g + mvnne r7, r12, lsr #15 @ +15: @ no clamp @ + @ + ldrb r12, [r4, r2] @ r12 = Y' = *(Y'_p + stride) + @ + and r11, r11, #0xf800 @ pack pixel + and r7, r7, #0x7e00 @ r3 = pixel = (r & 0xf800) | + orr r11, r11, r7, lsr #4 @ ((g & 0x7e00) >> 4) | + orr r3, r11, r3, lsr #10 @ (b >> 10) + @ + movs r7, r3, lsr #8 @ store pixel +20: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 20b @ + str r7, [r0, #0x10] @ +25: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 25b @ + str r3, [r0, #0x10] @ + @ + sub r7, r12, #16 @ r7 = Y = (Y' - 16)*149 + add r12, r7, r7, asl #2 @ + add r12, r12, r12, asl #4 @ + add r7, r12, r7, asl #6 @ + @ compute R, G, and B + add r3, r8, r7 @ r3 = b' = Y + bu + add r11, r9, r7, asl #1 @ r11 = r' = Y*2 + rv + rsb r7, r10, r7 @ r7 = g' = Y + guv + @ + sub r12, r3, r3, lsr #5 @ r3 = 31/32*b' + b'/256 + add r3, r12, r3, lsr #8 @ + @ + sub r12, r11, r11, lsr #5 @ r11 = 31/32*r' + r'/256 + add r11, r12, r11, lsr #8 @ + @ + sub r12, r7, r7, lsr #6 @ r7 = 63/64*g' + g'/256 + add r7, r12, r7, lsr #8 @ + @ + @ This element is zero - use r14 @ + @ + add r3, r3, r14 @ b = r3 + delta + add r11, r11, r14, lsl #1 @ r = r11 + delta*2 + add r7, r7, r14, lsr #1 @ g = r7 + delta/2 + @ + orr r12, r3, r11, asr #1 @ check if clamping is needed... + orr r12, r12, r7 @ ...at all + movs r12, r12, asr #15 @ + beq 15f @ no clamp @ + movs r12, r3, asr #15 @ clamp b + mvnne r3, r12, lsr #15 @ + andne r3, r3, #0x7c00 @ mask b only if clamped + movs r12, r11, asr #16 @ clamp r + mvnne r11, r12, lsr #16 @ + movs r12, r7, asr #15 @ clamp g + mvnne r7, r12, lsr #15 @ +15: @ no clamp @ + @ + ldrb r12, [r4], #1 @ r12 = Y' = *(Y'_p++) + @ + and r11, r11, #0xf800 @ pack pixel + and r7, r7, #0x7e00 @ r3 = pixel = (r & 0xf800) | + orr r11, r11, r7, lsr #4 @ ((g & 0x7e00) >> 4) | + orr r3, r11, r3, lsr #10 @ (b >> 10) + @ + movs r7, r3, lsr #8 @ store pixel +20: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 20b @ + str r7, [r0, #0x10] @ +25: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 25b @ + str r3, [r0, #0x10] @ + @ + sub r7, r12, #16 @ r7 = Y = (Y' - 16)*149 + add r12, r7, r7, asl #2 @ + add r12, r12, r12, asl #4 @ + add r7, r12, r7, asl #6 @ + @ compute R, G, and B + add r3, r8, r7 @ r3 = b' = Y + bu + add r11, r9, r7, asl #1 @ r11 = r' = Y*2 + rv + rsb r7, r10, r7 @ r7 = g' = Y + guv + @ + @ r8 = bu, r9 = rv, r10 = guv + @ + sub r12, r3, r3, lsr #5 @ r3 = 31/32*b' + b'/256 + add r3, r12, r3, lsr #8 @ + @ + sub r12, r11, r11, lsr #5 @ r11 = 31/32*r' + r'/256 + add r11, r12, r11, lsr #8 @ + @ + sub r12, r7, r7, lsr #6 @ r7 = 63/64*g' + g'/256 + add r7, r12, r7, lsr #8 @ + @ + add r12, r14, #0x100 @ + @ + add r3, r3, r12 @ b = r3 + delta + add r11, r11, r12, lsl #1 @ r = r11 + delta*2 + add r7, r7, r12, lsr #1 @ g = r7 + delta/2 + @ + orr r12, r3, r11, asr #1 @ check if clamping is needed... + orr r12, r12, r7 @ ...at all + movs r12, r12, asr #15 @ + beq 15f @ no clamp @ + movs r12, r3, asr #15 @ clamp b + mvnne r3, r12, lsr #15 @ + andne r3, r3, #0x7c00 @ mask b only if clamped + movs r12, r11, asr #16 @ clamp r + mvnne r11, r12, lsr #16 @ + movs r12, r7, asr #15 @ clamp g + mvnne r7, r12, lsr #15 @ +15: @ no clamp @ + @ + ldrb r12, [r4, r2] @ r12 = Y' = *(Y'_p + stride) + @ + and r11, r11, #0xf800 @ pack pixel + and r7, r7, #0x7e00 @ r3 = pixel = (r & 0xf800) | + orr r11, r11, r7, lsr #4 @ ((g & 0x7e00) >> 4) | + orr r3, r11, r3, lsr #10 @ (b >> 10) + @ + movs r7, r3, lsr #8 @ store pixel +20: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 20b @ + str r7, [r0, #0x10] @ +25: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 25b @ + str r3, [r0, #0x10] @ + @ + sub r7, r12, #16 @ r7 = Y = (Y' - 16)*149 + add r12, r7, r7, asl #2 @ + add r12, r12, r12, asl #4 @ + add r7, r12, r7, asl #6 @ + @ compute R, G, and B + add r3, r8, r7 @ r3 = b' = Y + bu + add r11, r9, r7, asl #1 @ r11 = r' = Y*2 + rv + rsb r7, r10, r7 @ r7 = g' = Y + guv + @ + sub r12, r3, r3, lsr #5 @ r3 = 31/32*b + b/256 + add r3, r12, r3, lsr #8 @ + @ + sub r12, r11, r11, lsr #5 @ r11 = 31/32*r + r/256 + add r11, r12, r11, lsr #8 @ + @ + sub r12, r7, r7, lsr #6 @ r7 = 63/64*g + g/256 + add r7, r12, r7, lsr #8 @ + @ + add r12, r14, #0x300 @ + @ + add r3, r3, r12 @ b = r3 + delta + add r11, r11, r12, lsl #1 @ r = r11 + delta*2 + add r7, r7, r12, lsr #1 @ g = r7 + delta/2 + @ + orr r12, r3, r11, asr #1 @ check if clamping is needed... + orr r12, r12, r7 @ ...at all + movs r12, r12, asr #15 @ + beq 15f @ no clamp @ + movs r12, r3, asr #15 @ clamp b + mvnne r3, r12, lsr #15 @ + andne r3, r3, #0x7c00 @ mask b only if clamped + movs r12, r11, asr #16 @ clamp r + mvnne r11, r12, lsr #16 @ + movs r12, r7, asr #15 @ clamp g + mvnne r7, r12, lsr #15 @ +15: @ no clamp @ + @ + and r11, r11, #0xf800 @ pack pixel + and r7, r7, #0x7e00 @ r3 = pixel = (r & 0xf800) | + orr r11, r11, r7, lsr #4 @ ((g & 0x7e00) >> 4) | + orr r3, r11, r3, lsr #10 @ (b >> 10) + @ + movs r7, r3, lsr #8 @ store pixel +20: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 20b @ + str r7, [r0, #0x10] @ +25: @ + ldr r11, [r0] @ + tst r11, #LCD1_BUSY_MASK @ + bne 25b @ + str r3, [r0, #0x10] @ + @ + subs r1, r1, #2 @ subtract block from width + bgt 10b @ loop line @ + @ + ldmpc regs=r4-r11 @ restore registers and return + .ltorg @ dump constant pool + .size lcd_write_yuv420_lines_odither, .-lcd_write_yuv420_lines_odither diff --git a/firmware/target/arm/pbell/vibe500/lcd-vibe500.c b/firmware/target/arm/pbell/vibe500/lcd-vibe500.c index 2daa5def74..047ef2bf53 100644 --- a/firmware/target/arm/pbell/vibe500/lcd-vibe500.c +++ b/firmware/target/arm/pbell/vibe500/lcd-vibe500.c @@ -35,6 +35,8 @@ static unsigned short disp_control_rev; /* Contrast setting << 8 */ static int lcd_contrast; +static unsigned lcd_yuv_options SHAREDBSS_ATTR = 0; + /* Forward declarations */ #if defined(HAVE_LCD_ENABLE) || defined(HAVE_LCD_SLEEP) static void lcd_display_off(void); @@ -375,6 +377,79 @@ bool lcd_active(void) /*** update functions ***/ +void lcd_yuv_set_options(unsigned options) +{ + lcd_yuv_options = options; +} + +/* Line write helper function for lcd_yuv_blit. Write two lines of yuv420. */ + +extern void lcd_write_yuv420_lines(unsigned char const * const src[3], + int width, + int stride); +extern void lcd_write_yuv420_lines_odither(unsigned char const * const src[3], + int width, + int stride, + int x_screen, /* To align dither pattern */ + int y_screen); + +/* Performance function to blit a YUV bitmap directly to the LCD */ +void lcd_blit_yuv(unsigned char * const src[3], + int src_x, int src_y, int stride, + int x, int y, int width, int height) +{ + const unsigned char *yuv_src[3]; + const unsigned char *ysrc_max; + int y0; + int options; + + if (!display_on) + return; + + width &= ~1; + height &= ~1; + + lcd_write_reg(R_VERT_RAM_ADDR_POS, ((LCD_WIDTH - 1 - x) << 8) | + ((LCD_WIDTH-1) - (x + width - 1))); + + y0 = LCD_HEIGHT - 1 - y; + + lcd_write_reg(R_ENTRY_MODE,0x1000); + + yuv_src[0] = src[0] + src_y * stride + src_x; + yuv_src[1] = src[1] + (src_y * stride >> 2) + (src_x >> 1); + yuv_src[2] = src[2] + (yuv_src[1] - src[1]); + ysrc_max = yuv_src[0] + height * stride; + + options = lcd_yuv_options; + + do + { + lcd_write_reg(R_HORIZ_RAM_ADDR_POS, (y0 << 8) | (y0 - 1)); + lcd_write_reg(R_RAM_ADDR_SET, ((LCD_WIDTH - 1 - x) << 8) | y0); + + /* start drawing */ + lcd_send_cmd(R_WRITE_DATA_2_GRAM); + + if (options & LCD_YUV_DITHER) + { + lcd_write_yuv420_lines_odither(yuv_src, width, stride,x, y); + y -= 2; + } + else + { + lcd_write_yuv420_lines(yuv_src, width, stride); + } + + y0 -= 2; + yuv_src[0] += stride << 1; + yuv_src[1] += stride >> 1; + yuv_src[2] += stride >> 1; + } + while (yuv_src[0] < ysrc_max); + lcd_write_reg(R_ENTRY_MODE,0x1008); +} + /* Update a fraction of the display. */ void lcd_update_rect(int x0, int y0, int width, int height) { |