1 files changed, 0 insertions, 65 deletions
diff --git a/firmware/target/mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c b/firmware/target/mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c
index cbbe8b1d5d..771082b2a7 100644
--- a/firmware/target/mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c
+++ b/firmware/target/mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c
@@ -24,21 +24,6 @@
 #include "spl-x1000.h"
 #include "gpio-x1000.h"
 
-#define CMDLINE_COMMON \
-    "mem=64M@0x0 no_console_suspend console=ttyS2,115200n8 lpj=5009408 ip=off"
-#define CMDLINE_NORMAL \
-    " init=/linuxrc ubi.mtd=3 root=ubi0:rootfs ubi.mtd=4 rootfstype=ubifs rw loglevel=8"
-
-static int dualboot_setup(void)
-{
-    spl_dualboot_init_clocktree();
-    spl_dualboot_init_uart2();
-
-    /* load PDMA MCU firmware */
-    jz_writef(CPM_CLKGR, PDMA(0));
-    return spl_storage_read(0x4000, 0x2000, (void*)0xb3422000);
-}
-
 const struct spl_boot_option spl_boot_options[] = {
     [BOOT_OPTION_ROCKBOX] = {
         .storage_addr = 0x6800,
@@ -47,60 +32,10 @@ const struct spl_boot_option spl_boot_options[] = {
         .exec_addr = X1000_DRAM_BASE,
         .flags = BOOTFLAG_UCLPACK,
     },
-    [BOOT_OPTION_OFW_PLAYER] = {
-        .storage_addr = 0x20000,
-        .storage_size = 4 * 1024 * 1024,
-        .load_addr = 0x80efffc0,
-        .exec_addr = 0x80f00000,
-        .cmdline = CMDLINE_COMMON CMDLINE_NORMAL,
-        .cmdline_addr = 0x80004000,
-        .setup = dualboot_setup,
-    },
-    [BOOT_OPTION_OFW_RECOVERY] = {
-        .storage_addr = 0x420000,
-        .storage_size = 5 * 1024 * 1024,
-        .load_addr = 0x80efffc0,
-        .exec_addr = 0x80f00000,
-        .cmdline = CMDLINE_COMMON,
-        .cmdline_addr = 0x80004000,
-        .setup = dualboot_setup,
-    },
 };
 
 int spl_get_boot_option(void)
 {
-    /* Button debounce time in OST clock cycles */
-    const uint32_t btn_stable_time = 100 * (X1000_EXCLK_FREQ / 4000);
-
-    /* Buttons to poll */
-    const unsigned port = GPIO_A;
-    const uint32_t recov_pin = (1 << 19);   /* Volume Up */
-    const uint32_t orig_fw_pin = (1 << 17); /* Play */
-
-    uint32_t pin = -1, lastpin = 0;
-    uint32_t deadline = 0;
-    int iter_count = 30; /* to avoid an infinite loop */
-
-    /* set GPIOs to input state */
-    gpioz_configure(port, recov_pin|orig_fw_pin, GPIOF_INPUT);
-
-    /* Poll until we get a stable reading */
-    do {
-        lastpin = pin;
-        pin = ~REG_GPIO_PIN(port) & (recov_pin|orig_fw_pin);
-        if(pin != lastpin) {
-            deadline = __ost_read32() + btn_stable_time;
-            iter_count -= 1;
-        }
-    } while(iter_count > 0 && __ost_read32() < deadline);
-
-    if(iter_count >= 0 && (pin & orig_fw_pin)) {
-        if(pin & recov_pin)
-            return BOOT_OPTION_OFW_RECOVERY;
-        else
-            return BOOT_OPTION_OFW_PLAYER;
-    }
-
     return BOOT_OPTION_ROCKBOX;
 }