summaryrefslogtreecommitdiffstats
path: root/firmware/target/mips/ingenic_x1000/shanlingq1/power-shanlingq1.c
diff options
context:
space:
mode:
Diffstat (limited to 'firmware/target/mips/ingenic_x1000/shanlingq1/power-shanlingq1.c')
-rw-r--r--firmware/target/mips/ingenic_x1000/shanlingq1/power-shanlingq1.c13
1 files changed, 13 insertions, 0 deletions
diff --git a/firmware/target/mips/ingenic_x1000/shanlingq1/power-shanlingq1.c b/firmware/target/mips/ingenic_x1000/shanlingq1/power-shanlingq1.c
index 75f8031dd9..59a2262f25 100644
--- a/firmware/target/mips/ingenic_x1000/shanlingq1/power-shanlingq1.c
+++ b/firmware/target/mips/ingenic_x1000/shanlingq1/power-shanlingq1.c
@@ -78,6 +78,19 @@ void power_init(void)
cw2015_init();
#endif
+ /* Set lowest sample rate */
+ axp_adc_set_rate(AXP_ADC_RATE_25HZ);
+
+ /* Enable required ADCs */
+ axp_adc_set_enabled(
+ (1 << ADC_BATTERY_VOLTAGE) |
+ (1 << ADC_CHARGE_CURRENT) |
+ (1 << ADC_DISCHARGE_CURRENT) |
+ (1 << ADC_VBUS_VOLTAGE) |
+ (1 << ADC_VBUS_CURRENT) |
+ (1 << ADC_INTERNAL_TEMP) |
+ (1 << ADC_APS_VOLTAGE));
+
/* Change supply voltage from the default of 1250 mV to 1200 mV,
* this matches the original firmware's settings. Didn't observe
* any obviously bad behavior at 1250 mV, but better to be safe. */