1 files changed, 0 insertions, 78 deletions
diff --git a/firmware/target/sh/archos/ondio/power-ondio.c b/firmware/target/sh/archos/ondio/power-ondio.c
deleted file mode 100644
index d7bbc08f4f..0000000000
--- a/firmware/target/sh/archos/ondio/power-ondio.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- * $Id$
- *
- * Copyright (C) 2002 by Linus Nielsen Feltzing
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-#include "config.h"
-#include "cpu.h"
-#include <stdbool.h>
-#include "kernel.h"
-#include "system.h"
-#include "power.h"
-#include "usb.h"
-#include "backlight-target.h"
-
-#if CONFIG_TUNER
-
-static bool powered = false;
-
-bool tuner_power(bool status)
-{
-    bool old_status = powered;
-
-    powered = status;
-    if (status)
-    {
-        and_b(~0x04, &PADRL); /* drive PA2 low for tuner enable */
-        sleep(1); /* let the voltage settle */
-    }
-    else
-        or_b(0x04, &PADRL); /* drive PA2 high for tuner disable */
-    return old_status;
-}
-
-#endif /* #if CONFIG_TUNER */
-
-void power_init(void)
-{
-    PBCR2 &= ~0x0c00;    /* GPIO for PB5 */
-    or_b(0x20, &PBIORL);
-    or_b(0x20, &PBDRL);  /* hold power */
-#ifndef HAVE_BACKLIGHT
-    /* Disable backlight on backlight-modded Ondios when running
-     * a standard build (always on otherwise). */
-    PACR1 &= ~0x3000;    /* Set PA14 (backlight control) to GPIO */
-    and_b(~0x40, &PADRH); /* drive it low */
-    or_b(0x40, &PAIORH); /* ..and output */
-#endif
-    PACR2 &= ~0x0030;  /* GPIO for PA2 */
-    or_b(0x04, &PADRL); /* drive PA2 high for tuner disable */
-    or_b(0x04, &PAIORL); /* output for PA2 */
-}
-
-void power_off(void)
-{
-    disable_irq();
-#ifdef HAVE_BACKLIGHT
-    /* Switch off the light on backlight-modded Ondios */
-    backlight_hw_off();
-#endif
-    and_b(~0x20, &PBDRL);
-    or_b(0x20, &PBIORL);
-    while(1);
-}