diff options
Diffstat (limited to 'firmware/target')
| -rw-r--r-- | firmware/target/coldfire/i2c-coldfire.c | 8 | ||||
| -rw-r--r-- | firmware/target/coldfire/iaudio/x5/m5636-x5.c | 11 |
2 files changed, 10 insertions, 9 deletions
diff --git a/firmware/target/coldfire/i2c-coldfire.c b/firmware/target/coldfire/i2c-coldfire.c index b4e7968d1a..d743d046a7 100644 --- a/firmware/target/coldfire/i2c-coldfire.c +++ b/firmware/target/coldfire/i2c-coldfire.c @@ -169,7 +169,7 @@ int i2c_start(volatile unsigned char *iface) ; if (!j) { - logf("i2c: bus is busy (iface=%08x)", iface); + logf("i2c: bus is busy (iface=%08lX)", (uintptr_t)iface); return -1; } @@ -190,7 +190,7 @@ int i2c_wait_for_slave(volatile unsigned char *iface) ; if (!j) { - logf("i2c: IFF not set (iface=%08x)", iface); + logf("i2c: IFF not set (iface=%08lX)", (uintptr_t)iface); i2c_stop(iface); return -2; } @@ -218,7 +218,7 @@ int i2c_outb(volatile unsigned char *iface, unsigned char byte) /* Check that transfer is complete */ if ( !(iface[O_MBSR] & ICF)) { - logf("i2c: transfer error (iface=%08x)", iface); + logf("i2c: transfer error (iface=%08lX)", (uintptr_t)iface); i2c_stop(iface); return -3; } @@ -226,7 +226,7 @@ int i2c_outb(volatile unsigned char *iface, unsigned char byte) /* Check that the byte has been ACKed */ if (iface[O_MBSR] & RXAK) { - logf("i2c: no ACK (iface=%08x)", iface); + logf("i2c: no ACK (iface=%08lX)", (uintptr_t)iface); i2c_stop(iface); return -4; } diff --git a/firmware/target/coldfire/iaudio/x5/m5636-x5.c b/firmware/target/coldfire/iaudio/x5/m5636-x5.c index d30ff360d6..02f48cf53d 100644 --- a/firmware/target/coldfire/iaudio/x5/m5636-x5.c +++ b/firmware/target/coldfire/iaudio/x5/m5636-x5.c @@ -40,11 +40,12 @@ void m5636_dump_regs(void) address < (unsigned short *)(M5636_BASE + 0x100); address++) { - logf("m5636 A:%08x D:%04x", address, (unsigned)*address); + logf("m5636 A:%08lX D:%04lX", (uintptr_t)address, + (uintptr_t)*address); } - logf("GPIO_INT_EN %08x", GPIO_INT_EN); - logf("GPIO1_OUT %08x", GPIO1_OUT); - logf("GPIO1_ENABLE %08x", GPIO1_ENABLE); - logf("GPIO1_FUNCTION %08x", GPIO1_FUNCTION); + logf("GPIO_INT_EN %08lX", GPIO_INT_EN); + logf("GPIO1_OUT %08lX", GPIO1_OUT); + logf("GPIO1_ENABLE %08lX", GPIO1_ENABLE); + logf("GPIO1_FUNCTION %08lX", GPIO1_FUNCTION); } |