diff options
Diffstat (limited to 'manual/getting_started/h10_install.tex')
-rw-r--r-- | manual/getting_started/h10_install.tex | 19 |
1 files changed, 0 insertions, 19 deletions
diff --git a/manual/getting_started/h10_install.tex b/manual/getting_started/h10_install.tex index bb212a6504..ff72f6661e 100644 --- a/manual/getting_started/h10_install.tex +++ b/manual/getting_started/h10_install.tex @@ -1,22 +1,3 @@ -\subsubsection{UMS and MTP} -The \playertype{} can be connected to a computer in two different modes: -\begin{itemize} - \item Universal Mass Storage (UMS): In this mode, it will appear on your computer as a regular disk. This mode works with all major operating systems, including Windows, Linux and Mac OS X. - \item Media Transfer Protocol (MTP): In this mode, it will appear on your computer as a Media Device. MTP was created by Microsoft for use with DAPs and only works with Windows XP and Media Player 10. -\end{itemize} -The \playerlongtype{} is \opt{h10}{only available as a MTP device, but}\opt{h10_5gb}{available as both a MTP and as a UMS device, depending on where and when you bought it. You can tell which you have by how it appears when you connect it to a computer. If it appears as a regular disk then it is UMS. If it appears as a Media Device on Windows XP, or if it does not appear at all on other operating systems, then it is MTP. Even if you have a MTP \dap{}, it} can be forced into UMS mode using the UMS trick. - -\subsubsection{UMS mode and the UMS trick} -It is possible to force a MTP \playertype{} to start up in UMS mode using the following procedure: -\begin{enumerate} - \item Ensure the \dap{} is fully powered off by \opt{h10}{using a pin to push the small reset button inside the hole between the Hold switch and remote control connector.}\opt{h10_5gb}{removing the battery and putting it back in again.} - \item Connect your \playertype{} to the computer using the data cable. - \item Hold \ButtonRight{} and push \ButtonPower{} to turn the \dap{} on. - \item Continue holding \ButtonRight{} until the USB Connected screen appears. - \item The \dap{} will now appear as a regular disk on your computer. -\end{enumerate} -\note{Once Rockbox has been installed, when you shut down your \dap{} from Rockbox it will totally power the player off so step 1 is no longer necessary.} - \subsubsection{Installation} \begin{enumerate} \item Download |