summaryrefslogtreecommitdiffstats
path: root/apps/settings_list.h
AgeCommit message (Collapse)AuthorFilesLines
2020-08-17Add open_plugin to coreWilliam Wilgus1-0/+1
open_plugin allows arbitrary plugins to be called in hotkey and start screen replaces PictureFlow Integration shortcuts menu plays plugins now too rather than store paths and parameters in the settings that reside in memory instead entries in a file are searched by hash. after all, the plugin has to be loaded from disk anyways ---------------------------------------------------------------------------- shortcut_viewer.rock-- can now call plugins rather than taking you to them in the browser ----------------------------------------------------------------------------- Added a new option to menus: F_CB_ON_SELECT_ONLY instead of option callback every time a item is accessed F_CB_ON_SELECT_ONLY fires callback only when item is selected ----------------------------------------------------------------------------- Added manual entries ----------------------------------------------------------------------------- Change-Id: I078b57b1d2b4dd633c89212c1082fcbc1b516e6a
2018-12-22Auto-Ranging Time Formatting For Menus (hh:mm:ss:mss)William Wilgus1-0/+1
Unifies time formatting in settings_list.c allows time format to display as HH:MM:SS.MSS or any consecutive combination thereof (hh:mm:ss, mm:ss, mm:ss.mss, ss.mss, hh, mm, ss ,mss) works in INT and TABLE settings with the addition of flag 'F_TIME_SETTING' Time is auto-ranged dependent on value Adds talk_time_intervals to allow time values to be spoken similar to display format: x Hours, x Minutes, x Seconds, x Milliseconds Table lookups merged or removed from recording, clip meter and lcd timeout -String_Choice replaced with TABLE_SETTING or INT_SETTING for these functions as well, cleaned-up cfg_vals that get saved to cfgfile RTL Languages ARE supported Negative values ARE supported Backlight on/off are now Always and Never to share formatter with LCD Timeout Added flag to allow ranged units to be locked to a minimum index Added flag to allow leading zero to be supressed from the largest unit merged talk_time_unit() and talk_time_intervals() optimized time_split() optimized format_time_auto() Backlight time-out list same as original Change-Id: I59027c62d3f2956bd16fdcc1a48b2ac32c084abd
2017-01-17Selective Backlight/Advanced Softlock - Selective actions based on contextWilliam Wilgus1-2/+2
Selective backlight allows the user to choose actions that will not enable the backlight when pressed. Advanced softlock allows user to choose actions that will not be blocked by screenlock on devices without a hold button. Both only occur in FM and WPS Contexts. Update: Back from the dead -Cleaned up code, removed unnecessary calls, re-arranged last filter action timeout conditional to work in case last_filtered_action_tick was never set -Added entries to the manual -Fixed back button on some menus not activating backlight -Made menus more intuitive, no actions selected now changes menu item to off. -Added talk fuctionality. -Added option to disable selective backlight while on external power. -Rewrote backlight and softlock handling code to fix issue with scrollwheels -Menu changed to have toggle(yes/no) and settings -Optimized selective actions lookup -Added option to disable notification of 'buttons locked' while softlocked -Removed uneeded code, consolidated action lookup to single function -Fixed incorrect name on selective softlock menu -Added option to disable touch on touchscreen devices -Fixed backlight on original screenlock without selective screenlock active -Added text selection in mask_select for when show_icons is off -Fixed voice in mask_select to speak if voice is defined instead of spelling -Added more lang defines (play skip seek) -Added option to disable unknown keys turning on backlight -Fixed Conditional argument In wrong place causing players without backlight to fail to build -Fixed Disable Unknown blocking detection of context change -Fixed canceling menu didn't update new settings -Added Autolock on backlight off -Removed backlight_on_force from backlight.c, Now sets ignore next to false and uses backlight_on -Cleaned up autolock code added strings to lang file -Fixed issue where rapid presses would bypass softlock -Removed old softlock code, Cleaned selective actions code -Changed menu to match existing RB menus -Fixed Backlight_on_Hold blocked by backlight_ignore_next -Fixed ignore_next for ipod -Fixed bug allowing context with softlock to bypass selective backlight -Changed mask_select to no longer prompt for changes to be saved -Changed menu names -Added ignore timeout to allow ipod scroll wheel to work properly and other players to still work properly, removed some previous code including ignore_event -Increased ignore timeout to prevent sd card accesses from interrupting action code and turning on backlight -Changed Unknown action to unmapped action in menu, changed handling code -Removed unneeded logic and variables for handling unfiltered actions -Reverted unmapped action code to previous functionality -Added manual entries (thanks JohnB) -Removed elusive unhandled unicode character from manual, changed formatting slightly Actions: Volume,Play,Seek,Skip Extras: Disable unmapped actions Disable selective backlight on external power Disable touch during softlock on touchscreen devices Disable softlock notifications (power button still notifies) Autolock on backlight off Method: Adds a function to ignore backlight on next call If selected action occurs backlight is forced on, Filter_first_keypress stays intact. Selective softlock allows selected actions through, bypasses the normal softlock routine. ToDo: DONE previous commit (#1) has attribution for folder_select.c which mask_select is based from. Change-Id: I08132ddcfd64c81751ef23b720f3ec6d68695fe4
2014-03-10Implement time-based resume and playback start.Michael Sevakis1-1/+1
This complements offset-based resume and playback start funcionality. The implementation is global on both HWCODEC and SWCODEC. Basically, if either the specified elapsed or offset are non-zero, it indicates a mid-track resume. To resume by time only, set elapsed to nonzero and offset to zero. To resume by offset only, set offset to nonzero and elapsed to zero. Which one the codec uses and which has priority is up to the codec; however, using an elapsed time covers more cases: * Codecs not able to use an offset such as VGM or other atomic formats * Starting playback at a nonzero elapsed time from a source that contains no offset, such as a cuesheet The change re-versions pretty much everything from tagcache to nvram. Change-Id: Ic7aebb24e99a03ae99585c5e236eba960d163f38 Reviewed-on: http://gerrit.rockbox.org/516 Reviewed-by: Michael Sevakis <jethead71@rockbox.org> Tested: Michael Sevakis <jethead71@rockbox.org>
2013-02-09EQ settings: Rework the settings to clean up the config file.Jonathan Gordon1-3/+3
Instead of 3 cfg lines per eq band there is now a single line for each: <config name>: <cutoff/center freq>, <q>, <gain> In addition, the config value names make a bit more sense. The old settings are still readable but config.cfg and any new settings files will be written with the new config values. (The old settings will be removed completly sometime after the next stable release). Also a slight rework of the advanced EQ menu UI Change-Id: I9008658d36ded442a5f2f825916df42a3934cbef Reviewed-on: http://gerrit.rockbox.org/394 Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
2013-01-02Use crc32 of filename to resume tracksRichard Quirk1-1/+1
As well as using an index, which breaks when a file is added or removed, use the crc32 of the filename. When the crc32 check passes the index is used directly. When it fails, the slow path is taken checking each file name in the playlist until the right crc is found. If that fails the playlist is started from the beginning. See http://www.rockbox.org/tracker/6411 Bump plugin API and nvram version numbers Change-Id: I156f61a9f1ac428b4a682bc680379cb6b60b1b10 Reviewed-on: http://gerrit.rockbox.org/372 Tested-by: Jonathan Gordon <rockbox@jdgordon.info> Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
2009-08-20Make the formatter functions used by the settings return a pointer to avoid ↵Nils Wallménius1-2/+2
usless copying of lang strings, this brought with it a long chain of const correctness and a few random cleanups git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22440 a1c6a512-1295-4272-9138-f99709370657
2008-11-03FS#9515 - customisable quickscreen. Allows you to choose which setting you ↵Jonathan Gordon1-1/+3
want displayed on the quickscreen. Allows almost every available setting. (change the options in settings > general settings > quickscreen items) Not every setting will work perfectly, some might need aditional handling if the change doesnt take effect straight away (let us know which are problematic so they can be fixed) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18984 a1c6a512-1295-4272-9138-f99709370657
2008-11-03Add a setting type which is completly user-defined. This setting type cannot ↵Jonathan Gordon1-0/+32
be used by the regular menu macros (e.g MENUITEM_SETTING() macro) so if you are goign to use this type remember to implement the setting screen seperately (using option_select() if you can) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18983 a1c6a512-1295-4272-9138-f99709370657
2008-10-26Add a simple plugin (apps/settings_dumper.rock) which dumps the valid values ↵Jonathan Gordon1-1/+1
of all the config settings to /settings_dumper.txt. If you notice any settings its not dumping please let me know. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18882 a1c6a512-1295-4272-9138-f99709370657
2008-09-21more slight playlist resume cleanuping... dont bother saving the playlist ↵Jonathan Gordon1-1/+1
first index value. its reset to 0 before playlistcontrol is loaded anyway, and then reset to 0 after its finished so its completly useless in global_status. runtimes, resume info, etc will be reset again... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18561 a1c6a512-1295-4272-9138-f99709370657
2008-09-20FS#9408 - dont bother saving the random seed in global status. I'm 99.9% ↵Jonathan Gordon1-1/+1
sure this code was being ignored anyway. If this commit causes problems with restarting playback open a bug report (getting testers was difficult...) Settings which are stored in the nvram.bin file will be reset with this commit. this includes resume info, runtimes, "last screen" and a few others. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18555 a1c6a512-1295-4272-9138-f99709370657
2008-06-28Updated our source code header to explicitly mention that we are GPL v2 orDaniel Stenberg1-2/+4
later. We still need to hunt down snippets used that are not. 1324 modified files... http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
2007-12-24FS#8353 - add a quick way to make a .cfg from the sound settings.Jonathan Gordon1-1/+2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15971 a1c6a512-1295-4272-9138-f99709370657
2007-12-07Save some bytes and reuse the settings saving code for eq preset saving.Dan Everton1-0/+1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15891 a1c6a512-1295-4272-9138-f99709370657
2007-11-26Allow (almost) arbitrary backlight fade in and fade out times (on targets ↵Jens Arnold1-2/+2
with software PWM fading), and comvert the associated settings to table settings. * Settings system: Unify a bunch of formatters and getlang helpers. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15817 a1c6a512-1295-4272-9138-f99709370657
2007-11-25Fix 64 bit warnings.Jens Arnold1-1/+1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15804 a1c6a512-1295-4272-9138-f99709370657
2007-11-25New way of handling integer settings with variable steps: table settings (FS ↵Jens Arnold1-11/+23
#8186, with fixes by me). This allows to get rid of those synchronised tables in firmware/ and apps/, making things more flexible and less error prone. First application: backlight timeouts. * Make some more things 'const'. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15803 a1c6a512-1295-4272-9138-f99709370657
2007-11-20Make id's created with the TALK_ID macro work in 64 bit simsNils Wallménius1-1/+1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15723 a1c6a512-1295-4272-9138-f99709370657
2007-11-05fix FS#7288 - pad the title of the scrolling settings so they actually scrollJonathan Gordon1-1/+2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15469 a1c6a512-1295-4272-9138-f99709370657
2007-10-15Integer setting changes to make all those settings consistant on the target.Jonathan Gordon1-2/+1
wheel targets, clockwise is increase value archos player, + is increase button targets, up is increase git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15120 a1c6a512-1295-4272-9138-f99709370657
2007-09-15Disable wrapping of the bass and treble settings and do the same for volume ↵Nils Wallménius1-2/+3
in a cleaner way, closes FS#7783 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14712 a1c6a512-1295-4272-9138-f99709370657
2007-08-19Use size_t type for the buffer_size parameter to formatter functions, static ↵Nils Wallménius1-1/+1
two private functions git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14392 a1c6a512-1295-4272-9138-f99709370657
2007-08-12Revert my filetypes commits from today. the nvram buffer is 44bytes of which ↵Jonathan Gordon1-1/+1
43 are currently being used. We need to figure out what to do about this. So in the mean time, set the MAX_FILETYPES to a huge value so we don't have to worry about this for a long while. This build shold be safe to use again. If you downloaded a build after r14286 make sure you grab a new one git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14291 a1c6a512-1295-4272-9138-f99709370657
2007-08-12Fix a problem with the nvram settings which meant adding new items to the ↵Jonathan Gordon1-1/+1
end needed the version bump (they dont anymore, but I'm bumping it now anyway to save some bug reports) Also operator precedence fixing. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14290 a1c6a512-1295-4272-9138-f99709370657
2007-05-29this adds 2 options to the recording settings menu to let you save all the ↵Jonathan Gordon1-3/+4
recording settings to a .cfg and view your saved presets. saves them in /.rockbox/recpresets. also moves the default location for "write theme config" to /.rockbox/themes git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13510 a1c6a512-1295-4272-9138-f99709370657
2007-02-27Code Police: Remove tabs throught apps/ . Hopefully no actual code Jonathan Gordon1-1/+1
change git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12504 a1c6a512-1295-4272-9138-f99709370657
2007-02-19Flip the order of some of the setting screens. (If any more are Jonathan Gordon1-1/+2
backwards let me know in the thread or IRC) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12400 a1c6a512-1295-4272-9138-f99709370657
2007-02-13Fix the keywords on some recently added files.Jonathan Gordon1-1/+1
Remove apps/recording_settings_menu.c which should never have been commited git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12293 a1c6a512-1295-4272-9138-f99709370657
2007-02-12* Move playback menu to the new sysetm Jonathan Gordon1-0/+1
(http://forums.rockbox.org/index.php?topic=8703.0 if I broke any of those settings accidently). * Add set_int_ex() which is the same as set_int() but adds a param which is a callback that returns the voice ID to talk for the selected value * Change the "pause on headphone unplug" to use meaningful strings in the config instead of numbers, this setting will be reset. * saves ~500bytes on the rec build :D git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12285 a1c6a512-1295-4272-9138-f99709370657
2007-02-08Convert the sound menu to the new systemJonathan Gordon1-12/+16
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12230 a1c6a512-1295-4272-9138-f99709370657
2007-02-08beginning of the new menu system. This commit shouldnt break anything, Jonathan Gordon1-9/+24
but comming ones might.. report bugs in http://forums.rockbox.org/index.php?topic=8703.0 and more info at http://www.rockbox.org/twiki/bin/view/Main/SettingsRecode git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12227 a1c6a512-1295-4272-9138-f99709370657
2007-02-01when saving config.cfg, only save settings which are not the same as Jonathan Gordon1-2/+2
default, hopefully will give a small boost to saving and loading times. Doing a manual save from "manage settings" > "write config" will save every setting. Adds an option to save a cfg file from only the settings needed in a theme .cfg (I may have missed some so let me know). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12172 a1c6a512-1295-4272-9138-f99709370657
2007-01-26Add 4 settings which were somehow missed during the conversion to config.cfg.Jonathan Gordon1-0/+1
Adds the LANG_ id for each setting to get them ready for the upcoming menu changes git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12113 a1c6a512-1295-4272-9138-f99709370657
2007-01-24allow int settings to call a function to get the default value (Fixes the ↵Jonathan Gordon1-7/+18
contrast problem on archos) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12102 a1c6a512-1295-4272-9138-f99709370657
2007-01-24Split the system status variables out of global_settings and put them into a ↵Jonathan Gordon1-1/+1
new struct global_status. Use status_save() if these need saving. Added car_adapter_mode to the nvram settings, so nvram settings will be reset. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12101 a1c6a512-1295-4272-9138-f99709370657
2007-01-23Settings are now stored in /.rockbox/config.cfg instead of the hidden ↵Jonathan Gordon1-0/+100
sector. (FS #6557) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12093 a1c6a512-1295-4272-9138-f99709370657