summaryrefslogtreecommitdiffstats
path: root/bootloader/telechips.c
AgeCommit message (Collapse)AuthorFilesLines
2008-05-02Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik ↵Dave Chapman1-1/+64
DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2008-04-27Enable 'touchscreen areas' on the D2, based on JdGordon's m:robe code. ↵Rob Purchase1-47/+10
Disable the bootloader debug screen, as that stuff is all available from the Debug menu now. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17257 a1c6a512-1295-4272-9138-f99709370657
2008-04-08D2: Update dual boot to use the hold switch. Update bootloader to show ↵Rob Purchase1-13/+11
messages until HOLD released, keep holding POWER to show old debug screen (these modes will eventually be removed). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17032 a1c6a512-1295-4272-9138-f99709370657
2008-03-29Make the Telechips bootloader slightly less messy, kill some warnings and ↵Rob Purchase1-57/+68
allow entry to the bootloader debug screen via the D2's hold switch. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16879 a1c6a512-1295-4272-9138-f99709370657
2008-03-22Enable tick IRQs on TCC780x. The main menu is now working on the D2.Rob Purchase1-4/+0
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16749 a1c6a512-1295-4272-9138-f99709370657
2008-03-12Cowon D2: Make the bootloader functional (usage instructions to appear on ↵Rob Purchase1-29/+26
the CowonD2Info wikipage shortly). Also re-enable IRAM by reducing Tremor's ICODE usage. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16646 a1c6a512-1295-4272-9138-f99709370657
2008-03-05D2: Make lcd_init_device() actually turn on the LCD, in preparation for ↵Rob Purchase1-6/+1
booting the main image. Previously this required an explicit lcd_enable(true). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16523 a1c6a512-1295-4272-9138-f99709370657
2008-02-16Shutdown needs about 2 seconds, but it seems to work :)Christian Gmeiner1-6/+2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16317 a1c6a512-1295-4272-9138-f99709370657
2008-02-13D2: Further work-in-progress on the NAND driver.Rob Purchase1-5/+69
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16308 a1c6a512-1295-4272-9138-f99709370657
2008-01-25Read ID codes & raw page data from D2 NAND flash (work in progress; Rob Purchase1-0/+4
no logical->physical address translation yet) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16167 a1c6a512-1295-4272-9138-f99709370657
2008-01-14Initial Cowon D2 commit:Rob Purchase1-1/+48
* bootloader test program (basic LCD & button drivers, reads touchscreen) * work-in-progress stubs for main build git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
2007-11-12Hardware controlled backlight brightness for iPod Video and Nano, retaining ↵Jens Arnold1-1/+1
the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15599 a1c6a512-1295-4272-9138-f99709370657
2007-11-01Button driver for Logik DAX, plus some changes to the debug info displayed ↵Dave Chapman1-7/+29
in the bootloader build. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15396 a1c6a512-1295-4272-9138-f99709370657
2007-10-28Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader ↵Dave Chapman1-0/+81
build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657