summaryrefslogtreecommitdiffstats
path: root/bootloader
AgeCommit message (Collapse)AuthorFilesLines
2008-04-16Gigabeat S bootloader: Improve untarring by reading the whole file to memory ↵Nicolas Pennequin1-21/+21
before starting to write the output files. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17136 a1c6a512-1295-4272-9138-f99709370657
2008-04-15Gigabeat S bootloader: make it move a rockbox binary back to /.rockbox/ when ↵Nicolas Pennequin1-1/+21
it finds one in the MTP directory. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17133 a1c6a512-1295-4272-9138-f99709370657
2008-04-15Setup the touchpads to have two modes - stylus and button - and set them in ↵Jonathan Gordon1-3/+26
button mode by default. in button mode the touchpad is split into a 3x3 grid for 9 seperate buttons which can be used by the action system like real buttons. Unify the keymap file for the touchpads in button mode. the target keymap file only needs to worry about real buttons. (As these ports mature each screen will need to be fixed seperatly to be able to use stylus mode (the lists can already but don't change mode just yet.) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17114 a1c6a512-1295-4272-9138-f99709370657
2008-04-11sync with key list with mi4code and add the single mi4 key it had but thisDaniel Stenberg1-0/+1
still didn't git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17077 a1c6a512-1295-4272-9138-f99709370657
2008-04-11mi4 key for the Philips GoGear SA9200 (PP5024). Let the fun begin...Mark Arigo1-0/+1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17069 a1c6a512-1295-4272-9138-f99709370657
2008-04-08D2: Update dual boot to use the hold switch. Update bootloader to show ↵Rob Purchase1-13/+11
messages until HOLD released, keep holding POWER to show old debug screen (these modes will eventually be removed). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17032 a1c6a512-1295-4272-9138-f99709370657
2008-04-02Revert... stupid svn doesn't complain when passing -m twice :(Jens Arnold1-64/+0
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16939 a1c6a512-1295-4272-9138-f99709370657
2008-04-02Make the measured LCD scanrates from the greylib known to the scanrate test ↵Jens Arnold1-0/+64
plugin. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16938 a1c6a512-1295-4272-9138-f99709370657
2008-03-31That was stupid. Should be enable_interrupt.Michael Sevakis1-1/+1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16898 a1c6a512-1295-4272-9138-f99709370657
2008-03-31Change the remaining set_interrupt_status usage to the more parsimonious ↵Michael Sevakis1-1/+1
disable/enable/restore. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16897 a1c6a512-1295-4272-9138-f99709370657
2008-03-29Make the Telechips bootloader slightly less messy, kill some warnings and ↵Rob Purchase1-57/+68
allow entry to the bootloader debug screen via the D2's hold switch. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16879 a1c6a512-1295-4272-9138-f99709370657
2008-03-27split boot.lds and move it into the target treeMarcoen Hirschberg1-1/+1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16855 a1c6a512-1295-4272-9138-f99709370657
2008-03-27Revert "initial Meizu M6SL port"Marcoen Hirschberg1-2/+0
This reverts commit b7bd17ce1715c3a8acbf74a63694c28b6075da5b. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16846 a1c6a512-1295-4272-9138-f99709370657
2008-03-27initial Meizu M6SL portMarcoen Hirschberg1-0/+2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16844 a1c6a512-1295-4272-9138-f99709370657
2008-03-27Don't make the Sansa bootloaders verbose when USB is connectedDave Chapman1-3/+5
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16836 a1c6a512-1295-4272-9138-f99709370657
2008-03-26kill the release script and build tarball from *everything* in SVN...Daniel Stenberg1-4/+0
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16818 a1c6a512-1295-4272-9138-f99709370657
2008-03-26Do core interrupt masking in a less general fashion and save some ↵Michael Sevakis4-7/+7
instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16811 a1c6a512-1295-4272-9138-f99709370657
2008-03-25Revert accidental tree commit. /me needs a smaller enter key...Jens Arnold1-64/+0
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16805 a1c6a512-1295-4272-9138-f99709370657
2008-03-25Cabbiev2 gigabeat background: reduce WPS backdrop filesize by storing it as ↵Jens Arnold1-0/+64
24 bit BMP instead of unnecessary 32 bit. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16802 a1c6a512-1295-4272-9138-f99709370657
2008-03-22Enable tick IRQs on TCC780x. The main menu is now working on the D2.Rob Purchase1-4/+0
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16749 a1c6a512-1295-4272-9138-f99709370657
2008-03-18Cosmetic fixes for the iAudio bootloader: Don't display 'Hold switch on' if ↵Jens Arnold1-1/+2
the reason for getting there was a spurious ON event. Don't disable the multi-colour LED in the M3 bootloader. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16690 a1c6a512-1295-4272-9138-f99709370657
2008-03-17Various coldfire fixes: (1) iAudio Bootloader: Check the status of main & ↵Jens Arnold1-7/+37
remote power button vs. the respective hold switch, and shut down when on hold. On X5/M5 this check is not strictly necessary for the main unit, but left there to keep things uniform. (2) M3: Stop reading the ADC properly before leaving the bootloader, on RoLo, and on reboot, to make it work reliably after those transitions. (3) Disable all interrupt sources on system init to avoid premature ISR calls after enabling interrupts in general. (4) iAudios: Proper implementation of ide_powered(), avoiding nasty HDD clicks in the bootloader when powering down, e.g. because of Hold. (5) Slight optimisations. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16689 a1c6a512-1295-4272-9138-f99709370657
2008-03-12Really fix low-bat detection in the iAudio bootloader. * Improve naming of ↵Jens Arnold3-5/+6
iriver and iaudio bootloader files. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16649 a1c6a512-1295-4272-9138-f99709370657
2008-03-12Cowon D2: Make the bootloader functional (usage instructions to appear on ↵Rob Purchase1-29/+26
the CowonD2Info wikipage shortly). Also re-enable IRAM by reducing Tremor's ICODE usage. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16646 a1c6a512-1295-4272-9138-f99709370657
2008-03-12More iAudio M3 work. Bootloader compiles, but doesn't work yet.Jens Arnold1-1/+1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
2008-03-05D2: Make lcd_init_device() actually turn on the LCD, in preparation for ↵Rob Purchase1-6/+1
booting the main image. Previously this required an explicit lcd_enable(true). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16523 a1c6a512-1295-4272-9138-f99709370657
2008-03-05m:robe 100: use power button for dual-booting the OF (short press to boot ↵Robert Kukla1-1/+1
rockbox, long press for OF) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16522 a1c6a512-1295-4272-9138-f99709370657
2008-02-17Give the Gigabeat S bootloader the ability to untar a tarball.Nicolas Pennequin1-14/+98
To test a build, use 'make tar' and send the tar to the unit. The bootloader will unarchive it and delete it before loading the main binary. This is a temporary hack to make testing possible until we have a better way of sending a complete build. Also enable writing to the disk by disabling the optimised write stubs. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16338 a1c6a512-1295-4272-9138-f99709370657
2008-02-16Shutdown needs about 2 seconds, but it seems to work :)Christian Gmeiner1-6/+2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16317 a1c6a512-1295-4272-9138-f99709370657
2008-02-13D2: Further work-in-progress on the NAND driver.Rob Purchase1-5/+69
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16308 a1c6a512-1295-4272-9138-f99709370657
2008-02-11Major USB fixes by Frank Gevaerts. Still disabled in builds, #define ↵Björn Stenberg1-0/+2
USE_ROCKBOX_USB to test. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16279 a1c6a512-1295-4272-9138-f99709370657
2008-02-09Prepare for a new bootloader 7-pre4 release for iriver H100 series. Synced ↵Miika Pekkarinen1-31/+67
to work properly with SVN, and hopefully fixed remote detection problem and audio thump for some users. Also pure H100/H115 should be supported now. Actual bootloaders will be released separately. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16252 a1c6a512-1295-4272-9138-f99709370657
2008-02-08Gigabeat S: Interrupt enabled bootloader. Miscellaneous integration changes.Michael Sevakis1-3/+16
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16243 a1c6a512-1295-4272-9138-f99709370657
2008-02-05Gigabeat S mixer: Make some progress. Get the tick and core sleep working ↵Michael Sevakis1-1/+2
using the AVIC. Redo the startup code to remap from IRAM and not include the lcd driver frambuffer in the remapping (until it can be moved). Clean up LCD driver. For other misc. changes, see the diffs. Now it progresses to ATA init and fails with -11 but without crashing or hanging. Replace all bootloaders. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16216 a1c6a512-1295-4272-9138-f99709370657
2008-01-25Read ID codes & raw page data from D2 NAND flash (work in progress; Rob Purchase1-0/+4
no logical->physical address translation yet) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16167 a1c6a512-1295-4272-9138-f99709370657
2008-01-14Initial Cowon D2 commit:Rob Purchase2-2/+49
* bootloader test program (basic LCD & button drivers, reads touchscreen) * work-in-progress stubs for main build git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
2008-01-09Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver ↵Mark Arigo2-1/+8
works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657
2007-12-23Gigabeat S memory management stuff. Will Robertson1-1/+1
* Moved crt0.S to imx31 subdirectory, as it was the last target using the unified file. * DRAM is now remapped to 0x0, facilitating interrupts (which aren't done yet) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15965 a1c6a512-1295-4272-9138-f99709370657
2007-11-27* Make the Gigabeat S bootloader a bit more interesting: it looks for the ↵Nicolas Pennequin1-9/+41
first firmware file it finds on the second partition and attempts to load it. Loading fails to get past the splash screen though. * Make the main binary compile. To send a firmware file, use mtp-sendfile. To update you'll need to delete the previous firmware file, as files are named sequentially and the first one is loaded. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15836 a1c6a512-1295-4272-9138-f99709370657
2007-11-22Red fix: USB power check implemented in driver insteadBjörn Stenberg1-2/+2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15761 a1c6a512-1295-4272-9138-f99709370657
2007-11-21Fix iPod Nano & Video bootloaders. Backlight uses sleep(), hence it must be ↵Jens Arnold1-5/+5
initialised after kernel_init(). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15743 a1c6a512-1295-4272-9138-f99709370657
2007-11-20* dont compile audio codec drivers for bootloader, as we dont need them -> ↵Christian Gmeiner2-7/+17
saves time * dont include uda1380 in bootloaders * fix to get rid of a nasty humming sound during is not uda1380 specific but iriver specific and so put the fix into the bootloader. An other option was to put audiohw_reset() into target tree... but i want to get rid of audiohw_reset git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15721 a1c6a512-1295-4272-9138-f99709370657
2007-11-19shutdown if hold is on in the non-ipod-pp target bootloaders.Jonathan Gordon1-1/+10
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15679 a1c6a512-1295-4272-9138-f99709370657
2007-11-12Hardware controlled backlight brightness for iPod Video and Nano, retaining ↵Jens Arnold7-17/+17
the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15599 a1c6a512-1295-4272-9138-f99709370657
2007-11-11Show some more registers in the debug screen, fix the touchscreen when ↵Karl Kurbjun1-16/+7
SCREEN_ROTATE is set. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15566 a1c6a512-1295-4272-9138-f99709370657
2007-11-09Swap two messages which were the wrong way round. Thanks to Barry Wardell ↵Dave Chapman1-2/+2
for spotting. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15549 a1c6a512-1295-4272-9138-f99709370657
2007-11-08Add check for e200 bootloaders and also for an already-patched e200r ↵Dave Chapman1-10/+72
bootloader, so we can display more useful messages to the user, instead of simply "Unknown Bootloader". Also a bit of code cleaning and whitespace insertion. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15543 a1c6a512-1295-4272-9138-f99709370657
2007-11-07Get the user timer working properly consequentially fixing doom without a hack.Karl Kurbjun1-5/+6
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15510 a1c6a512-1295-4272-9138-f99709370657
2007-11-02m:robe 500i port: Add backlight support to the main build.Catalin Patulea1-6/+11
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15404 a1c6a512-1295-4272-9138-f99709370657
2007-11-02m:robe 500i port: Add support for the backlight client in the SPI subsystemCatalin Patulea1-0/+7
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15402 a1c6a512-1295-4272-9138-f99709370657