summaryrefslogtreecommitdiffstats
path: root/bootloader
AgeCommit message (Collapse)AuthorFilesLines
2008-02-17Give the Gigabeat S bootloader the ability to untar a tarball.Nicolas Pennequin1-14/+98
To test a build, use 'make tar' and send the tar to the unit. The bootloader will unarchive it and delete it before loading the main binary. This is a temporary hack to make testing possible until we have a better way of sending a complete build. Also enable writing to the disk by disabling the optimised write stubs. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16338 a1c6a512-1295-4272-9138-f99709370657
2008-02-16Shutdown needs about 2 seconds, but it seems to work :)Christian Gmeiner1-6/+2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16317 a1c6a512-1295-4272-9138-f99709370657
2008-02-13D2: Further work-in-progress on the NAND driver.Rob Purchase1-5/+69
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16308 a1c6a512-1295-4272-9138-f99709370657
2008-02-11Major USB fixes by Frank Gevaerts. Still disabled in builds, #define ↵Björn Stenberg1-0/+2
USE_ROCKBOX_USB to test. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16279 a1c6a512-1295-4272-9138-f99709370657
2008-02-09Prepare for a new bootloader 7-pre4 release for iriver H100 series. Synced ↵Miika Pekkarinen1-31/+67
to work properly with SVN, and hopefully fixed remote detection problem and audio thump for some users. Also pure H100/H115 should be supported now. Actual bootloaders will be released separately. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16252 a1c6a512-1295-4272-9138-f99709370657
2008-02-08Gigabeat S: Interrupt enabled bootloader. Miscellaneous integration changes.Michael Sevakis1-3/+16
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16243 a1c6a512-1295-4272-9138-f99709370657
2008-02-05Gigabeat S mixer: Make some progress. Get the tick and core sleep working ↵Michael Sevakis1-1/+2
using the AVIC. Redo the startup code to remap from IRAM and not include the lcd driver frambuffer in the remapping (until it can be moved). Clean up LCD driver. For other misc. changes, see the diffs. Now it progresses to ATA init and fails with -11 but without crashing or hanging. Replace all bootloaders. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16216 a1c6a512-1295-4272-9138-f99709370657
2008-01-25Read ID codes & raw page data from D2 NAND flash (work in progress; Rob Purchase1-0/+4
no logical->physical address translation yet) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16167 a1c6a512-1295-4272-9138-f99709370657
2008-01-14Initial Cowon D2 commit:Rob Purchase2-2/+49
* bootloader test program (basic LCD & button drivers, reads touchscreen) * work-in-progress stubs for main build git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
2008-01-09Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver ↵Mark Arigo2-1/+8
works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657
2007-12-23Gigabeat S memory management stuff. Will Robertson1-1/+1
* Moved crt0.S to imx31 subdirectory, as it was the last target using the unified file. * DRAM is now remapped to 0x0, facilitating interrupts (which aren't done yet) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15965 a1c6a512-1295-4272-9138-f99709370657
2007-11-27* Make the Gigabeat S bootloader a bit more interesting: it looks for the ↵Nicolas Pennequin1-9/+41
first firmware file it finds on the second partition and attempts to load it. Loading fails to get past the splash screen though. * Make the main binary compile. To send a firmware file, use mtp-sendfile. To update you'll need to delete the previous firmware file, as files are named sequentially and the first one is loaded. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15836 a1c6a512-1295-4272-9138-f99709370657
2007-11-22Red fix: USB power check implemented in driver insteadBjörn Stenberg1-2/+2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15761 a1c6a512-1295-4272-9138-f99709370657
2007-11-21Fix iPod Nano & Video bootloaders. Backlight uses sleep(), hence it must be ↵Jens Arnold1-5/+5
initialised after kernel_init(). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15743 a1c6a512-1295-4272-9138-f99709370657
2007-11-20* dont compile audio codec drivers for bootloader, as we dont need them -> ↵Christian Gmeiner2-7/+17
saves time * dont include uda1380 in bootloaders * fix to get rid of a nasty humming sound during is not uda1380 specific but iriver specific and so put the fix into the bootloader. An other option was to put audiohw_reset() into target tree... but i want to get rid of audiohw_reset git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15721 a1c6a512-1295-4272-9138-f99709370657
2007-11-19shutdown if hold is on in the non-ipod-pp target bootloaders.Jonathan Gordon1-1/+10
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15679 a1c6a512-1295-4272-9138-f99709370657
2007-11-12Hardware controlled backlight brightness for iPod Video and Nano, retaining ↵Jens Arnold7-17/+17
the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15599 a1c6a512-1295-4272-9138-f99709370657
2007-11-11Show some more registers in the debug screen, fix the touchscreen when ↵Karl Kurbjun1-16/+7
SCREEN_ROTATE is set. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15566 a1c6a512-1295-4272-9138-f99709370657
2007-11-09Swap two messages which were the wrong way round. Thanks to Barry Wardell ↵Dave Chapman1-2/+2
for spotting. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15549 a1c6a512-1295-4272-9138-f99709370657
2007-11-08Add check for e200 bootloaders and also for an already-patched e200r ↵Dave Chapman1-10/+72
bootloader, so we can display more useful messages to the user, instead of simply "Unknown Bootloader". Also a bit of code cleaning and whitespace insertion. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15543 a1c6a512-1295-4272-9138-f99709370657
2007-11-07Get the user timer working properly consequentially fixing doom without a hack.Karl Kurbjun1-5/+6
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15510 a1c6a512-1295-4272-9138-f99709370657
2007-11-02m:robe 500i port: Add backlight support to the main build.Catalin Patulea1-6/+11
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15404 a1c6a512-1295-4272-9138-f99709370657
2007-11-02m:robe 500i port: Add support for the backlight client in the SPI subsystemCatalin Patulea1-0/+7
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15402 a1c6a512-1295-4272-9138-f99709370657
2007-11-01Button driver for Logik DAX, plus some changes to the debug info displayed ↵Dave Chapman1-7/+29
in the bootloader build. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15396 a1c6a512-1295-4272-9138-f99709370657
2007-10-28Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader ↵Dave Chapman2-0/+83
build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
2007-10-26Some small cleanups and code for testingKarl Kurbjun1-0/+5
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15312 a1c6a512-1295-4272-9138-f99709370657
2007-10-23Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:RobeKarl Kurbjun1-1/+1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15275 a1c6a512-1295-4272-9138-f99709370657
2007-10-22touchpad driver for the mrobe. nothing in apps/ uses it yet.Jonathan Gordon1-14/+18
Changes to button driver: HAVE_BUTTON_DATA targets pass the button data straight back in the button_read_device() call git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15262 a1c6a512-1295-4272-9138-f99709370657
2007-10-21More M:Robe work including a fix to lcd-as-memframe for larger screens ↵Karl Kurbjun1-2/+1
thanks to Michael Sevakis. Also fixes simulator builds. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15254 a1c6a512-1295-4272-9138-f99709370657
2007-10-20Fix warningBarry Wardell1-0/+2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15226 a1c6a512-1295-4272-9138-f99709370657
2007-10-20Support database rebuild disabling when USB is connected for all e200 OF ↵Barry Wardell1-47/+9
versions. Some people may have to update the OF (to any version they want) using sansapatcher before it will work. This just ensures that the NVPARAMS are in a good state and we can be sure where to look for the rebuild flag.The c200 OF doesn't reboot before rebuilding the database, so our trick won't ever work there. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15225 a1c6a512-1295-4272-9138-f99709370657
2007-10-20Make the firmware partition dump code compile again.Barry Wardell1-1/+1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15223 a1c6a512-1295-4272-9138-f99709370657
2007-10-20Add 3 more OF datbase refresh locations for the e200 bootloader (FS#7990)Jonathan Gordon1-1/+4
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15219 a1c6a512-1295-4272-9138-f99709370657
2007-10-19init spi and uart in the main buildJonathan Gordon1-3/+2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15195 a1c6a512-1295-4272-9138-f99709370657
2007-10-18slightly better touchpad driver. Still not brilliant, but the ↵Jonathan Gordon1-6/+8
bootloader/debugger can follow a stylus with a cursor, so we can start work on getting apps/ working git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15187 a1c6a512-1295-4272-9138-f99709370657
2007-10-18Some changes to the UART/button driver - reduce the number of interrupts - ↵Karl Kurbjun1-3/+21
more work is needed git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15180 a1c6a512-1295-4272-9138-f99709370657
2007-10-17Turns out you can boot the main build by copying apps/rockbox.bin to ↵Karl Kurbjun1-1/+1
/rockbox.mrboot. Something is wrong with the rockbox bootloader, but at least now we can work with the main build. Added in a warning for the core_sleep function git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15162 a1c6a512-1295-4272-9138-f99709370657
2007-10-14Turn on the backlight in the e200 booloader. This is necessary for when we ↵Barry Wardell1-0/+8
replace the sansa bootloader altogether. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15109 a1c6a512-1295-4272-9138-f99709370657
2007-10-14clean up the e200r installer app to make it more user friendlyJonathan Gordon1-5/+19
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15104 a1c6a512-1295-4272-9138-f99709370657
2007-10-13Cleanup more warnings on the M:RobeKarl Kurbjun1-32/+41
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15097 a1c6a512-1295-4272-9138-f99709370657
2007-10-01touchpad calibration (very simple calibration screen is in mrobe500.c Jonathan Gordon1-19/+60
but will not actually be used in the bootloader once rockbox main is running) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14937 a1c6a512-1295-4272-9138-f99709370657
2007-09-30Move some more files around and get the main build compilingKarl Kurbjun1-1/+1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14919 a1c6a512-1295-4272-9138-f99709370657
2007-09-30IRQ driven touchpad driver, crude but workingJonathan Gordon1-17/+20
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14914 a1c6a512-1295-4272-9138-f99709370657
2007-09-30slow - but working - IRQ based uart/button driver.Jonathan Gordon1-2/+7
change some of the uart function names from CamelCase git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14908 a1c6a512-1295-4272-9138-f99709370657
2007-09-25More ATA work (that doesn't work)Karl Kurbjun1-3/+3
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14848 a1c6a512-1295-4272-9138-f99709370657
2007-09-23Working DM320 interrupts, changed the way registers are accessed in spi and ↵Karl Kurbjun1-14/+23
uart drivers. Uart might be broken with interrupts - buttons on remote don't seem to respond when interrupts are enabled. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14836 a1c6a512-1295-4272-9138-f99709370657
2007-09-22More interupt/timer workKarl Kurbjun1-1/+2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14823 a1c6a512-1295-4272-9138-f99709370657
2007-09-22start of the tsc2100 driver.Jonathan Gordon1-17/+13
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14816 a1c6a512-1295-4272-9138-f99709370657
2007-09-22Seperate M:Robe crt0.S, fix the vector tables for the bootloader, and show ↵Karl Kurbjun1-3/+7
touchscreen values on single line. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14814 a1c6a512-1295-4272-9138-f99709370657
2007-09-21Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks.Will Robertson2-0/+97
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14805 a1c6a512-1295-4272-9138-f99709370657