path: root/firmware/export/s3c2440.h
AgeCommit message (Expand)AuthorFilesLines
2010-04-13s5l870x : use mmu-arm.SRafaël Carré1-0/+2
2009-10-31Replace hard coded memory sizeBob Cousins1-2/+4
2009-10-26Many more drivers for mini2440. Now the main binary compiles and runs.Dominik Wenger1-0/+33
2009-10-22Working Bootloader for mini2440. Dominik Wenger1-0/+131
2009-10-19Initial mini2440 port.Dominik Wenger1-1/+56
2009-07-12Remove OHCI registers from s3c2440.h and move them to their own header. Since...Frank Gevaerts1-27/+1
2009-06-29Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.hRafaël Carré1-0/+7
2009-02-11Refine the routines in mmu-arm.c and move them to mmu-arm.S since the code is...Michael Sevakis1-2/+3
2008-12-04Meg-FX: s3c register definitions really should be unsigned. Switch from 'int'...Michael Sevakis1-365/+365
2008-06-28Updated our source code header to explicitly mention that we are GPL v2 orDaniel Stenberg1-2/+4
2008-04-22This is a big chunk of code necessary to prepare for Gigabeat F flash loading...Karl Kurbjun1-6/+6
2007-10-23Fix the FRAME offset calculation on Gigabeat (m:robe 500 too?).Michael Sevakis1-1/+1
2007-10-23Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:RobeKarl Kurbjun1-1/+1
2007-07-05Get rid of yellow plus an optimization I should have seen in the first place.Michael Sevakis1-32/+32
2007-07-05Gigabeat: Use vectored IRQ mode interrupts and add a trap for unhandled ones.Michael Sevakis1-0/+83
2007-01-13Setup LCD ourselves; move LCD buffer and TTB to free up 1.7MB of memoryGreg White1-3/+6
2006-11-05fix typoMarcoen Hirschberg1-1/+1
2006-10-23reduce the number of gigabeat warningsMarcoen Hirschberg1-1/+1
2006-08-12update the gigabeat code and move to target_treeMarcoen Hirschberg1-0/+3
2006-03-02gigabeat related changesMarcoen Hirschberg1-0/+461