path: root/firmware/target/arm/imx233/uartdbg-imx233.h
AgeCommit message (Collapse)AuthorFilesLines
2016-05-28imx233: generate register headers using headergen_v2 and update code for itAmaury Pouly1-1/+0
NOTE: this commit does not introduce any change, ideally even the binary should be almost the same. I checked the disassembly by hand and there are only a few differences here and there, mostly the compiler decides to compile very close expressions slightly differently. I tried to run the new code on several targets to make sure and saw no difference. The major syntax changes of the new headers are as follows: - BF_{WR,SET,CLR} are now superpowerful and allows to set several fileds at once: BF_WR(reg, field1(value1), field2(value2), ...) - BF_CS (use like BF_WR) does a write to reg_CLR and then reg_SET instead of RMW - there is no more need for macros like BF_{WR_,SET,CLR}_V, since one can simply BF_WR with field_V(name) - the old BF_SETV macro has no trivial equivalent and is replaced with its its equivalent for BF_WR(reg_SET, ...) I also rename the register headers: "regs/regs-x.h" -> "regs/x.h" to avoid the redundant "regs". Final note: the registers were generated using the following command: ./headergen_v2 -g imx -o ../../firmware/target/arm/imx233/regs/ desc/regs-stmp3{600,700,780}.xml Change-Id: I7485e8b4315a0929a8edb63e7fa1edcaa54b1edc
2013-06-18imx233: add uartdbg driverAmaury Pouly1-0/+35
The driver is current unused and very minimal. It can used on targets which have an accessible UART port and it will be used on some creative targets as backlight control. Change-Id: Id710d63574aadb0a2d7327b03187506b469470b1