Age | Commit message (Collapse) | Author | Files | Lines |
|
They confirmed it worked in the original ticket.
Change-Id: I949f119554a1e8bbdd0e4160c104cbc4aa2bd17d
|
|
This is a quick patch to solve FS#13104, we can not disable the
clickwheel LDO from within interrupt code, so for the moment we
leave it enabled all the time, it is unknown how power comsumption
is affected when the hold switch is locked.
Change-Id: I8f675702e2b5becbcd9197c8b044e6b8daeea79f
|
|
Finally the hold switch workaround is removed and it is detected
in the same way as OF does.
Change-Id: Iceac6ca48ffd131b8ee9f62ffdc2b3e30eb02042
|
|
Uses GPIO.E2 (Request To Send) to detect the holdswitch status,
it is a temporal workaround that seems to work on all models.
Holdswitch status must be detected to drive low GPIO.E2 (RTS)
and GPIO.E4 (Data Out) when the holdswitch is locked, otherwise
battery life decreases about 25%.
Holdswitch unlock action is detected by reading the HELLO message
that the external wheel controller sends when it is powered on,
this allows to quickly capture clickwheel activity after unlock.
GPIO.E2 is also used in case the HELLO message is missed because
the holdswitch was unlocked before Rockbox/bootloader starts.
These 2 lines (RTS and DOUT) can not be used to transmit messages
to the external clickwheel controller, not a problem, actually no
messages are sent while normal operation, only at initialization
stage.
Change-Id: I415fe54bfcbc2086d0f56d7affe6f789ce81a6db
|
|
Change-Id: Ie01251af2cd843979b5fdefcfa541ba377d13bd7
|
|
_remote_backlight_* and _buttonlight_* are cleaned as well
Change-Id: I73653752831bbe170c26ba95d3bc04c2e3a5cf30
|
|
This restores functionality that was broken in g#194 and committed as
revision 7ec426e497daa1b4a6082bf4e4e3df687b11db44.
Bidirectional communication is required to ask the clickwheel controller
for the initial button state during boot. Otherwise our driver would only
know about pressed buttons when the first change event is received,
which is too late for e.g. prevention of USB connection during boot.
This fix is also required to support the selection of OF, Rockbox,
Disk Mode, etc. in the iPod Classic Rockbox bootloader.
Change-Id: I127d54cf9e630d8075dd6d66f95dacb2816bfbc8
Reviewed-on: http://gerrit.rockbox.org/938
Reviewed-by: Michael Sparmann <theseven@gmx.net>
Tested: Michael Sparmann <theseven@gmx.net>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
|
|
These nearly identical files are multiplying like rabbits as PP targets
are added and make SoC-related changes a PITA. Just include the master
.lds file from the target one as was done for bootloader USB.
Change-Id: I65e9e653030f0688b1728e32ada16abf2932e029
|
|
Change-Id: If9936bfbbd3bc3eb2a3e3e290701b8517eabfb13
|
|
Mask click wheel controller clock gate when the hold switch is in
the locked position
Change-Id: I9de33db189afdb76cc5057e4c0e7efc587cf762b
|
|
Configures GPIO ports to detect holdswitch status instead of
polling the PMU via I2C, this fixes some random crashes
Change-Id: I407c9ca4c2c9203842f9e774b1c8d0455d59048c
Reviewed-on: http://gerrit.rockbox.org/194
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
|
|
Change all lcd drivers to using a pointer to the static framebuffer
instead of directly accessing the static array. This will let us
later do fun things like dynamic framebuffer sizes (RaaA) or
ability to use different buffers for different layers (dynamic
skin backdrops!)
Change-Id: I0a4d58a9d7b55e6c932131b929e5d4c9f9414b06
|
|
no need to define BUTTON_REMOTE anymore
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31620 a1c6a512-1295-4272-9138-f99709370657
|
|
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31534 a1c6a512-1295-4272-9138-f99709370657
|
|
Vectors are needed by the CPU, but they don't need to be accessed by Rockbox.
Without the KEEP(), they can be removed when liking with --gc-sections,
creating a broken binary without any warnings. This tells the linker to not
remove them. It should enable use of --gc-sections for all targets. When not
using --gc-sections, this does not change the binary.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31351 a1c6a512-1295-4272-9138-f99709370657
|
|
lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31041 a1c6a512-1295-4272-9138-f99709370657
|
|
gevearts naughtily ignored
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30996 a1c6a512-1295-4272-9138-f99709370657
|
|
Origional implementation by Robert Keevil with contributions from Frederik Vestre, Stoyan Stratev, Craig Elliott, Michael Sparmann, Thomas Schott, Rosso Maltese, and syncs from a bunch of other people!
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30995 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30897 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30204 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30182 a1c6a512-1295-4272-9138-f99709370657
|
|
detected RAM size.
Also set up a callback for the battery capacity setting (for all players) so changes take effect without having to reboot.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30170 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29986 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29767 a1c6a512-1295-4272-9138-f99709370657
|
|
semaphore_wait takes a timeout now so codecs and plugins have to be made incompatible. Don't make semaphores for targets not using them.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29492 a1c6a512-1295-4272-9138-f99709370657
|
|
switch is engaged
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29276 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29274 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29273 a1c6a512-1295-4272-9138-f99709370657
|
|
powered down
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29272 a1c6a512-1295-4272-9138-f99709370657
|
|
powered down
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29267 a1c6a512-1295-4272-9138-f99709370657
|
|
power manager, and cache the result for 100 milliseconds because the power manager doesn't like being spammed
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29264 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29242 a1c6a512-1295-4272-9138-f99709370657
|
|
0 LCD (iPod Photo).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29120 a1c6a512-1295-4272-9138-f99709370657
|
|
The code was taken from FS#10034 and slightly changed to avoid white flashing when shutting off the display.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29033 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29027 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29026 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29001 a1c6a512-1295-4272-9138-f99709370657
|
|
nano1G and color yo/y1 this swap never happened, for color x0/x1 it was always swapped.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28956 a1c6a512-1295-4272-9138-f99709370657
|
|
driver. Additionally refactor RGB and YUV screen updates to use same code fragments and save some binsize. YUV speedup is +3-4%, RGB 1/4 screen +2%.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28944 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28934 a1c6a512-1295-4272-9138-f99709370657
|
|
blitting. Speedup is +19% for YUV.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28933 a1c6a512-1295-4272-9138-f99709370657
|
|
blitting, introduce special handling for full width screen updates. Speed up is about +30% for YUV on both color/nano1G.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28930 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28843 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28807 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28806 a1c6a512-1295-4272-9138-f99709370657
|
|
they belong, prepare for s5l8702
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28800 a1c6a512-1295-4272-9138-f99709370657
|
|
button is held
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28237 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28161 a1c6a512-1295-4272-9138-f99709370657
|
|
This is related to gdb, and gdb can only work on SH and ifp
This was mistakenly kept when app.lds was forked for each SoC
Side-effect: fix DEBUG builds when the rockbox binary is expected to
be loaded at the start of DRAM and there is no runtime relocation
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28124 a1c6a512-1295-4272-9138-f99709370657
|