summaryrefslogtreecommitdiffstats
path: root/firmware/target/arm
AgeCommit message (Expand)AuthorFilesLines
2009-07-11fix yellow : panicf() is declared in panic.hRafaël Carré1-0/+1
2009-07-11S5L8700: add skeleton for __dbg_hw_info and __dbg_ports items in the debug menuBertrik Sikken2-0/+126
2009-07-11Sansa AMS: panic with the PL180 controller status register in case of errorsRafaël Carré1-12/+14
2009-07-11S5L8700: mask away status bits from ADC conversion resultBertrik Sikken1-1/+1
2009-07-11Sansa AMS: handle properly SD transfer errorsRafaël Carré1-4/+8
2009-07-11Meizu: use hardware PWM instead of interrupts+GPIO to set the backlight brigh...Bertrik Sikken1-54/+19
2009-07-10D2: Remove unnecessary ide_power functions.Rob Purchase1-10/+0
2009-07-10D2: Update the battery discharge curve to observed values, and add a crude ru...Rob Purchase1-7/+7
2009-07-10Make the TCC NAND driver use the (virtual) disk activity LED.Rob Purchase1-5/+15
2009-07-10Adding last minutes comments to explain things is only cool if you close it ...Thomas Martitz1-1/+2
2009-07-10Rearrange things a bit for less #ifdefs and less duplication.Thomas Martitz1-13/+10
2009-07-10Sansa AMS SD driver: fix error checking in µSD insertionRafaël Carré1-14/+28
2009-07-09S5L8700: use wakeup_wait/wakeup_signal instead of polling for i2c communicationBertrik Sikken1-7/+20
2009-07-09S5L8700: Implement ADC driverBertrik Sikken4-76/+98
2009-07-08M:Robe 500: fix a bug where the remote LCD was not properly sleepingKarl Kurbjun1-1/+4
2009-07-08M:robe 500 - Set the mask on the remote so that it indicates the battery statusKarl Kurbjun1-8/+22
2009-07-07Meizu: implement i2c for the meizu fmradio and update the tea5760 tuner driverBertrik Sikken1-0/+146
2009-07-07Philips SA9200: fix the buttons to work with flip screen mode (does anyone us...Mark Arigo2-8/+8
2009-07-06Sansa AMS: display the virtual led icon on disk transfersRafaël Carré2-10/+8
2009-07-06sAMSa: Turn the backlight off before rebooting to avoid irritating lcd flash.Thomas Martitz1-0/+2
2009-07-06Samsa SD driver : acknowledge USB events, now reboots on USB insertionRafaël Carré1-2/+2
2009-07-06Samsa AMS: start of an USB driver (nothing working atm)Rafaël Carré1-0/+286
2009-07-06DM320: Add the same fix from r21647Karl Kurbjun1-1/+2
2009-07-06Sansa AMS: Disable voltage scaling for now until we found a way to make it re...Thomas Martitz1-3/+4
2009-07-05s5l8700: fix off-by-one error in DMA countBertrik Sikken1-1/+1
2009-07-05S5L8700: implement kernel timerBertrik Sikken2-0/+61
2009-07-05S5L8700: initial framework for PCM (using DMA transfers)Bertrik Sikken3-0/+436
2009-07-05Sansa AMS : don't reinvent adc_read(), patch by FlynDiceRafaël Carré1-4/+5
2009-07-05ARM922T's icache isn't coherent with its dcache, so we need to ensure that it...Michael Giacomelli2-0/+6
2009-07-01Move sd_get_info() into common sd codeRafaël Carré2-35/+0
2009-07-01 * Move some more stuff to the general SD driverMaurus Cuelenaere2-26/+0
2009-07-01add firmware/driver/sd.c which contains common code between SD driversRafaël Carré2-110/+29
2009-07-01card_extract_bits() take the start bit argument as defined in public SanDisk ...Rafaël Carré1-5/+5
2009-07-01Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD)Rafaël Carré4-88/+67
2009-07-01AMSSansa: Corrects bug introduced with r21577 causing random lockups on AMSSa...Jack Halpin1-3/+4
2009-07-01Philips SA9200. Add LCD features: enable, sleep, flip, contrast, and invert.Mark Arigo3-25/+241
2009-06-30FS#10344 - AMSSansa Dynamically adjust core voltage to extend playtime.Jack Halpin3-7/+30
2009-06-29Sansa AMS : use the aligned buffer in bss for all DMA transfersRafaël Carré1-16/+11
2009-06-29Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.hRafaël Carré13-254/+2
2009-06-29Remove the TIMER_* macros and declare target-specific functions in timer.hRafaël Carré18-149/+27
2009-06-29Remove int_prio argument from timer_register, and move the only use for it in...Rafaël Carré8-9/+9
2009-06-29Move PP (last target) timer code in target treeRafaël Carré2-0/+139
2009-06-29Move SH7034 timer code in the target treeRafaël Carré7-7/+7
2009-06-29Move PNX0101 timer code in the target treeRafaël Carré2-0/+121
2009-06-29Rename TIMER_REGISTER macro to TIMER_START and TIMER_UNREGISTER to TIMER_STOP...Rafaël Carré14-63/+56
2009-06-29Move Sansa AMS timer code in the target treeRafaël Carré1-0/+68
2009-06-29Sansa AMS: correct sd_select_bank() in SD driverRafaël Carré1-8/+15
2009-06-28Create an udacodec interface (similar to ascodec and wmcoded) and adapt/imple...Bertrik Sikken1-0/+62
2009-06-27S5L8700: implement i2c driver (used for communicating with the RTC and the co...Bertrik Sikken1-0/+136
2009-06-27Meizu M3: implement logarithmic brightness curve (curve provided by markun) a...Bertrik Sikken1-3/+5