summaryrefslogtreecommitdiffstats
path: root/firmware
AgeCommit message (Expand)AuthorFilesLines
2008-04-15Setup the touchpads to have two modes - stylus and button - and set them in b...Jonathan Gordon5-10/+85
2008-04-14Undo r17095. A bug report clearly showed this power supply is also needed for...Andree Buschmann1-1/+1
2008-04-14Gigabeat S: Make ADC battery voltage reading correct. Tiny tweak to ADC drive...Michael Sevakis2-6/+3
2008-04-14Oops...simple math proves elusive at times. Get the array calcs right.Michael Sevakis1-11/+6
2008-04-13ADC driver for Gigabeat S - a bit on the general side for now. Needs to have ...Michael Sevakis5-56/+312
2008-04-13only reconnect mass storage if there is actually an active usb connection, wi...Frank Gevaerts1-3/+6
2008-04-13ASM optimization for fiq_playback(). Saves about 0.4MHz of CPU while playback...Andree Buschmann1-23/+61
2008-04-13Further power saving for iPod Video (FS#8603). Do not enable D2REGC1 voltage ...Andree Buschmann1-1/+1
2008-04-13Charger detection for Gigabeat SNils Wallménius4-3/+47
2008-04-12Refine information and macros for clock skipping. Not functional changes.Jens Arnold1-15/+14
2008-04-12Fix cut'n'pasterelated yellows.Rob Purchase1-1/+1
2008-04-12D2: Charging detection, plus basic PCF50606 interrupt handler.Rob Purchase3-1/+45
2008-04-12Make a couple of private functions staticNils Wallménius1-7/+7
2008-04-12Add GPIO manager. Get the PMIC interrupt handling working (along with power b...Michael Sevakis17-47/+655
2008-04-12D2: Implement battery voltage readout from PCF50606 (levels not yet calibrate...Rob Purchase3-16/+35
2008-04-12Move a function to gwps-common.c because it belongs thereNils Wallménius2-14/+4
2008-04-12LCD drivers: * Automatically optimise horizontal and vertical lines drawn via...Jens Arnold7-120/+140
2008-04-12FS#8871 by Tomasz Wasilczyk, avoid negative runtime estimation (that would la...Nils Wallménius1-0/+4
2008-04-12Big oops. Fix enum spi_module_number to set right enum values. :p.Michael Sevakis1-1/+2
2008-04-11D2: Remove USB detection as it's not actually on GPIOC26 (that's a charging i...Rob Purchase1-5/+2
2008-04-11Add a "View I/O Ports" screen for imx31. Show all GPIO contents.Michael Sevakis4-3/+116
2008-04-11iPod Video 30Gig doesn't seem to need the ata locking hack so we'll just atte...Michael Sevakis2-2/+2
2008-04-11Serial driver for imx31. Perhaps not 100% but maybe 80-90% (future developmen...Michael Sevakis13-93/+864
2008-04-10Properly clear clear-on-write bits in the PP502x USB controllerBertrik Sikken1-6/+6
2008-04-09D2: Beginnings of a WM8985 driver (based on WM8758, using EQ1 and EQ5 as HW t...Rob Purchase5-60/+264
2008-04-09Fix red + introduce new defines for DM320 targetsMaurus Cuelenaere1-158/+319
2008-04-09Add DM320 I²C driver, although not (yet) enabled in the sources.Maurus Cuelenaere2-42/+116
2008-04-08D2: Implement power-off by putting the PCF50606 to sleep (and reduce timeout ...Rob Purchase4-32/+38
2008-04-08D2: Update dual boot to use the hold switch. Update bootloader to show messag...Rob Purchase1-3/+3
2008-04-07Make the TCC780x ADC driver work again in the bootloader.Rob Purchase1-10/+11
2008-04-07Make the greyscale library work on the m:robe 100. Testing on target done by ...Jens Arnold3-20/+136
2008-04-07Some more debug output disabling.Nicolas Pennequin1-1/+1
2008-04-07explicitly align the ibss section by adjusting _iramend - fixes hang on m:rob...Robert Kukla8-1/+8
2008-04-07Remove some more simulator debugging output.Steve Bavin1-3/+3
2008-04-07Hopefully fix FS#8506 (OF cant be loaded on some PP targets). also hopefully ...Jonathan Gordon2-5/+7
2008-04-07Wow. Fix those irq #defines for ARM and use the right one in power-c200_e200....Michael Sevakis2-5/+5
2008-04-07Better sansa shutdown sequence in power_off.Michael Sevakis1-9/+7
2008-04-07Save a couple of bytes by using moveq.l where possible.Jens Arnold1-7/+7
2008-04-06Iriver remote LCD driver: * Split out assembler parts. * Reintroduced the 2 t...Jens Arnold3-204/+311
2008-04-06Get device-specific code out of init_threads and add core_thread_init to be i...Michael Sevakis1-14/+37
2008-04-061st/2nd Gen: Make backlight inversion adaption in the greyscale library work ...Jens Arnold1-2/+2
2008-04-06Shorten the uncontended (expected) corelock_(try_)lock return path. Squeeze d...Michael Sevakis1-17/+17
2008-04-06e200: Get the UNCACHED_ADDR macro and phys_fb_address use out of the lcd driver.Michael Sevakis1-29/+11
2008-04-06Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now w...Michael Sevakis26-83/+241
2008-04-04Tick/IRQ driven ADCs for TCC780x. Solves the weird button behaviour mentioned...Rob Purchase2-23/+53
2008-04-04Greyscale library: Optionally put the greyscale ISR on COP on portalplayertar...Jens Arnold1-4/+26
2008-04-04D2: Adjustable backlight brightness (sometimes fails when boosted, suggests I...Rob Purchase5-45/+69
2008-04-04Split out the PCF5060x register defines into a common header and create a gen...Rob Purchase5-58/+157
2008-04-04Allow to select the core for running the user timer on portalplayer targets. ...Jens Arnold3-8/+19
2008-04-041st/2nd Gen: Backlight inversion needs to be protected from interrupts, becau...Jens Arnold3-14/+16