summaryrefslogtreecommitdiffstats
path: root/firmware
AgeCommit message (Expand)AuthorFilesLines
2008-04-10Properly clear clear-on-write bits in the PP502x USB controllerBertrik Sikken1-6/+6
2008-04-09D2: Beginnings of a WM8985 driver (based on WM8758, using EQ1 and EQ5 as HW t...Rob Purchase5-60/+264
2008-04-09Fix red + introduce new defines for DM320 targetsMaurus Cuelenaere1-158/+319
2008-04-09Add DM320 I²C driver, although not (yet) enabled in the sources.Maurus Cuelenaere2-42/+116
2008-04-08D2: Implement power-off by putting the PCF50606 to sleep (and reduce timeout ...Rob Purchase4-32/+38
2008-04-08D2: Update dual boot to use the hold switch. Update bootloader to show messag...Rob Purchase1-3/+3
2008-04-07Make the TCC780x ADC driver work again in the bootloader.Rob Purchase1-10/+11
2008-04-07Make the greyscale library work on the m:robe 100. Testing on target done by ...Jens Arnold3-20/+136
2008-04-07Some more debug output disabling.Nicolas Pennequin1-1/+1
2008-04-07explicitly align the ibss section by adjusting _iramend - fixes hang on m:rob...Robert Kukla8-1/+8
2008-04-07Remove some more simulator debugging output.Steve Bavin1-3/+3
2008-04-07Hopefully fix FS#8506 (OF cant be loaded on some PP targets). also hopefully ...Jonathan Gordon2-5/+7
2008-04-07Wow. Fix those irq #defines for ARM and use the right one in power-c200_e200....Michael Sevakis2-5/+5
2008-04-07Better sansa shutdown sequence in power_off.Michael Sevakis1-9/+7
2008-04-07Save a couple of bytes by using moveq.l where possible.Jens Arnold1-7/+7
2008-04-06Iriver remote LCD driver: * Split out assembler parts. * Reintroduced the 2 t...Jens Arnold3-204/+311
2008-04-06Get device-specific code out of init_threads and add core_thread_init to be i...Michael Sevakis1-14/+37
2008-04-061st/2nd Gen: Make backlight inversion adaption in the greyscale library work ...Jens Arnold1-2/+2
2008-04-06Shorten the uncontended (expected) corelock_(try_)lock return path. Squeeze d...Michael Sevakis1-17/+17
2008-04-06e200: Get the UNCACHED_ADDR macro and phys_fb_address use out of the lcd driver.Michael Sevakis1-29/+11
2008-04-06Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now w...Michael Sevakis26-83/+241
2008-04-04Tick/IRQ driven ADCs for TCC780x. Solves the weird button behaviour mentioned...Rob Purchase2-23/+53
2008-04-04Greyscale library: Optionally put the greyscale ISR on COP on portalplayertar...Jens Arnold1-4/+26
2008-04-04D2: Adjustable backlight brightness (sometimes fails when boosted, suggests I...Rob Purchase5-45/+69
2008-04-04Split out the PCF5060x register defines into a common header and create a gen...Rob Purchase5-58/+157
2008-04-04Allow to select the core for running the user timer on portalplayer targets. ...Jens Arnold3-8/+19
2008-04-041st/2nd Gen: Backlight inversion needs to be protected from interrupts, becau...Jens Arnold3-14/+16
2008-04-03Fix the PP5002 interrupt controller register definitions. The PP5002 interrup...Jens Arnold1-2/+12
2008-04-03Oops; I forgot one.Nicolas Pennequin1-0/+1
2008-04-03m:robe 100 Robert Kukla2-95/+177
2008-04-02Revert... stupid svn doesn't complain when passing -m twice :(Jens Arnold4-44/+76
2008-04-02Make the measured LCD scanrates from the greylib known to the scanrate test p...Jens Arnold4-76/+44
2008-04-02Ooops, overlooked the no-backlight stubs...Jens Arnold1-2/+12
2008-04-02Greyscale library: * Implement linearisation curve flipping for 1st/2nd Gen i...Jens Arnold3-18/+19
2008-04-02LCD driver tweaks for greyscale iPods: * Use 1/7 bias, 5x step-up and the hig...Jens Arnold1-41/+13
2008-04-02gigabeat S: Set the tick speed correctly (calced from clocking regdump). Use ...Michael Sevakis1-20/+41
2008-04-02Gigabeat S: Add some more register #defines to use later.Michael Sevakis1-8/+167
2008-04-01Clean up the way empty transfers are sent in error cases.Frank Gevaerts1-21/+23
2008-04-01Use a better place to enable the interrupts.Jens Arnold1-1/+1
2008-04-01iPod 1st..3rd Gen and Mini 1st Gen fixes/improvements: * Remove the unnecessa...Jens Arnold3-51/+24
2008-04-01Make the gigabeat S boot again.Michael Sevakis1-1/+2
2008-04-01Change a #define constant that conflicts with a mingw definition. Change "WAI...Michael Sevakis3-6/+7
2008-03-31Introduce sanity check and extra nop to stabilise TCC780x set_cpu_frequency()...Rob Purchase3-9/+9
2008-03-31Change the remaining set_interrupt_status usage to the more parsimonious disa...Michael Sevakis7-16/+14
2008-03-31Fixes FS#8552. On some c200s, the second parameter in setting R_Y_ADDR_AREA w...Mark Arigo1-0/+13
2008-03-31meg-fx: Add headers to files in the target directory that were missing them. ...Michael Sevakis9-2/+92
2008-03-31meg-fx: It's important to make sure certain interrupt-related registers have ...Michael Sevakis7-34/+59
2008-03-30Fix red and clean up meg-fx firmware sources. Remove an unused file.Michael Sevakis2-14/+5
2008-03-30Have meg-fx i2c driver use the wakeup functionality by making it interrupt-ba...Michael Sevakis1-55/+72
2008-03-30Add a lightweight wakeup object for fast processors.Michael Sevakis3-0/+105