From 08c41d42bb699a1be99c9696b4d4fb7b40e8723a Mon Sep 17 00:00:00 2001 From: Dave Chapman Date: Sun, 19 Oct 2008 14:11:01 +0000 Subject: Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657 --- .../target/arm/as3525/sansa-e200v2/adc-target.h | 24 ++ .../arm/as3525/sansa-e200v2/backlight-target.h | 37 ++ .../target/arm/as3525/sansa-e200v2/button-e200v2.c | 98 ++++++ .../target/arm/as3525/sansa-e200v2/button-target.h | 60 ++++ .../target/arm/as3525/sansa-e200v2/lcd-e200v2.c | 385 +++++++++++++++++++++ .../target/arm/as3525/sansa-e200v2/system-target.h | 28 ++ .../target/arm/as3525/sansa-e200v2/timer-target.h | 38 ++ .../target/arm/as3525/sansa-m200v2/adc-target.h | 24 ++ .../arm/as3525/sansa-m200v2/backlight-target.h | 37 ++ .../target/arm/as3525/sansa-m200v2/button-m200v2.c | 43 +++ .../target/arm/as3525/sansa-m200v2/button-target.h | 54 +++ .../target/arm/as3525/sansa-m200v2/system-target.h | 28 ++ .../target/arm/as3525/sansa-m200v2/timer-target.h | 38 ++ 13 files changed, 894 insertions(+) create mode 100644 firmware/target/arm/as3525/sansa-e200v2/adc-target.h create mode 100644 firmware/target/arm/as3525/sansa-e200v2/backlight-target.h create mode 100644 firmware/target/arm/as3525/sansa-e200v2/button-e200v2.c create mode 100644 firmware/target/arm/as3525/sansa-e200v2/button-target.h create mode 100644 firmware/target/arm/as3525/sansa-e200v2/lcd-e200v2.c create mode 100644 firmware/target/arm/as3525/sansa-e200v2/system-target.h create mode 100644 firmware/target/arm/as3525/sansa-e200v2/timer-target.h create mode 100644 firmware/target/arm/as3525/sansa-m200v2/adc-target.h create mode 100644 firmware/target/arm/as3525/sansa-m200v2/backlight-target.h create mode 100644 firmware/target/arm/as3525/sansa-m200v2/button-m200v2.c create mode 100644 firmware/target/arm/as3525/sansa-m200v2/button-target.h create mode 100644 firmware/target/arm/as3525/sansa-m200v2/system-target.h create mode 100644 firmware/target/arm/as3525/sansa-m200v2/timer-target.h (limited to 'firmware/target/arm/as3525') diff --git a/firmware/target/arm/as3525/sansa-e200v2/adc-target.h b/firmware/target/arm/as3525/sansa-e200v2/adc-target.h new file mode 100644 index 0000000000..bea0272496 --- /dev/null +++ b/firmware/target/arm/as3525/sansa-e200v2/adc-target.h @@ -0,0 +1,24 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2008 ?? + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#ifndef _ADC_TARGET_H_ +#define _ADC_TARGET_H_ + +#endif /* _ADC_TARGET_H_ */ diff --git a/firmware/target/arm/as3525/sansa-e200v2/backlight-target.h b/firmware/target/arm/as3525/sansa-e200v2/backlight-target.h new file mode 100644 index 0000000000..9533d0a6b5 --- /dev/null +++ b/firmware/target/arm/as3525/sansa-e200v2/backlight-target.h @@ -0,0 +1,37 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2008 ?? + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#ifndef BACKLIGHT_TARGET_H +#define BACKLIGHT_TARGET_H + +static inline bool _backlight_init(void) +{ + return true; +} + +static inline void _backlight_on(void) +{ +} + +static inline void _backlight_off(void) +{ +} + +#endif diff --git a/firmware/target/arm/as3525/sansa-e200v2/button-e200v2.c b/firmware/target/arm/as3525/sansa-e200v2/button-e200v2.c new file mode 100644 index 0000000000..fc2715216c --- /dev/null +++ b/firmware/target/arm/as3525/sansa-e200v2/button-e200v2.c @@ -0,0 +1,98 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2006 by Barry Wardell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +/* Taken from button-h10.c by Barry Wardell and reverse engineering by MrH. */ + +#include "system.h" +#include "button.h" +#include "backlight.h" +#include "powermgmt.h" + +#define WHEEL_REPEAT_INTERVAL 300000 +#define WHEEL_FAST_ON_INTERVAL 20000 +#define WHEEL_FAST_OFF_INTERVAL 60000 +#define WHEELCLICKS_PER_ROTATION 48 /* wheelclicks per full rotation */ + +/* Clickwheel */ +#ifndef BOOTLOADER +static unsigned int old_wheel_value = 0; +static unsigned int wheel_repeat = BUTTON_NONE; +static unsigned int wheel_click_count = 0; +static unsigned int wheel_delta = 0; +static int wheel_fast_mode = 0; +static unsigned long last_wheel_usec = 0; +static unsigned long wheel_velocity = 0; +static long last_wheel_post = 0; +static long next_backlight_on = 0; +/* Buttons */ +static bool hold_button = false; +static bool hold_button_old = false; +#define _button_hold() hold_button +#else +#define _button_hold() false /* FIXME */ +#endif /* BOOTLOADER */ +static int int_btn = BUTTON_NONE; + +void button_init_device(void) +{ +} + +bool button_hold(void) +{ + return _button_hold(); +} + +/* clickwheel */ +#ifndef BOOTLOADER +void clickwheel_int(void) +{ +} +#endif /* BOOTLOADER */ + +/* device buttons */ +void button_int(void) +{ + unsigned char state; + + int_btn = BUTTON_NONE; + +} + +/* + * Get button pressed from hardware + */ +int button_read_device(void) +{ +#ifdef BOOTLOADER + /* Read buttons directly in the bootloader */ + button_int(); +#else + /* light handling */ + if (hold_button != hold_button_old) + { + hold_button_old = hold_button; + backlight_hold_changed(hold_button); + } +#endif /* BOOTLOADER */ + + /* The int_btn variable is set in the button interrupt handler */ + return int_btn; +} diff --git a/firmware/target/arm/as3525/sansa-e200v2/button-target.h b/firmware/target/arm/as3525/sansa-e200v2/button-target.h new file mode 100644 index 0000000000..969f91b143 --- /dev/null +++ b/firmware/target/arm/as3525/sansa-e200v2/button-target.h @@ -0,0 +1,60 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2006 by Barry Wardell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#ifndef _BUTTON_TARGET_H_ +#define _BUTTON_TARGET_H_ + +#include +#include "config.h" + +#define HAS_BUTTON_HOLD + +bool button_hold(void); +void button_init_device(void); +int button_read_device(void); +#ifndef BOOTLOADER +void clickwheel_int(void); +#endif +void button_int(void); + +/* Sandisk Sansa E200 button codes */ + +/* Main unit's buttons */ +#define BUTTON_REC 0x00000001 +#define BUTTON_DOWN 0x00000002 +#define BUTTON_RIGHT 0x00000004 +#define BUTTON_LEFT 0x00000008 +#define BUTTON_SELECT 0x00000010 +#define BUTTON_UP 0x00000020 +#define BUTTON_POWER 0x00000040 + +#define BUTTON_SCROLL_BACK 0x00000080 +#define BUTTON_SCROLL_FWD 0x00000100 + +#define BUTTON_MAIN 0x00000fff + +/* No Remote control */ +#define BUTTON_REMOTE 0 + +#define POWEROFF_BUTTON BUTTON_POWER +#define POWEROFF_COUNT 10 + +#endif /* _BUTTON_TARGET_H_ */ diff --git a/firmware/target/arm/as3525/sansa-e200v2/lcd-e200v2.c b/firmware/target/arm/as3525/sansa-e200v2/lcd-e200v2.c new file mode 100644 index 0000000000..e14ad21681 --- /dev/null +++ b/firmware/target/arm/as3525/sansa-e200v2/lcd-e200v2.c @@ -0,0 +1,385 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2004 by Linus Nielsen Feltzing + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#include "config.h" + +#include "cpu.h" +#include "lcd.h" +#include "kernel.h" +#include "thread.h" +#include +#include +#include "file.h" +#include "debug.h" +#include "system.h" +#include "font.h" +#include "bidi.h" + +static bool display_on = false; /* is the display turned on? */ +static bool display_flipped = false; +static int xoffset = 0; /* needed for flip */ + +/* register defines */ +#define R_START_OSC 0x00 +#define R_DRV_OUTPUT_CONTROL 0x01 +#define R_DRV_WAVEFORM_CONTROL 0x02 +#define R_ENTRY_MODE 0x03 +#define R_COMPARE_REG1 0x04 +#define R_COMPARE_REG2 0x05 + +#define R_DISP_CONTROL1 0x07 +#define R_DISP_CONTROL2 0x08 +#define R_DISP_CONTROL3 0x09 + +#define R_FRAME_CYCLE_CONTROL 0x0b +#define R_EXT_DISP_IF_CONTROL 0x0c + +#define R_POWER_CONTROL1 0x10 +#define R_POWER_CONTROL2 0x11 +#define R_POWER_CONTROL3 0x12 +#define R_POWER_CONTROL4 0x13 + +#define R_RAM_ADDR_SET 0x21 +#define R_WRITE_DATA_2_GRAM 0x22 + +#define R_GAMMA_FINE_ADJ_POS1 0x30 +#define R_GAMMA_FINE_ADJ_POS2 0x31 +#define R_GAMMA_FINE_ADJ_POS3 0x32 +#define R_GAMMA_GRAD_ADJ_POS 0x33 + +#define R_GAMMA_FINE_ADJ_NEG1 0x34 +#define R_GAMMA_FINE_ADJ_NEG2 0x35 +#define R_GAMMA_FINE_ADJ_NEG3 0x36 +#define R_GAMMA_GRAD_ADJ_NEG 0x37 + +#define R_GAMMA_AMP_ADJ_RES_POS 0x38 +#define R_GAMMA_AMP_AVG_ADJ_RES_NEG 0x39 + +#define R_GATE_SCAN_POS 0x40 +#define R_VERT_SCROLL_CONTROL 0x41 +#define R_1ST_SCR_DRV_POS 0x42 +#define R_2ND_SCR_DRV_POS 0x43 +#define R_HORIZ_RAM_ADDR_POS 0x44 +#define R_VERT_RAM_ADDR_POS 0x45 + +#define LCD_CMD (*(volatile unsigned short *)0xf0000000) +#define LCD_DATA (*(volatile unsigned short *)0xf0000002) + +#define R_ENTRY_MODE_HORZ 0x7030 +#define R_ENTRY_MODE_VERT 0x7038 + +/* TODO: Implement this function */ +static void lcd_delay(int x) +{ + (void)x; +} + +/* DBOP initialisation, do what OF does */ +static void ams3525_dbop_init(void) +{ + + /* TODO: More... */ + + DBOP_TIMPOL_01 = 0xe167e167; + DBOP_TIMPOL_23 = 0xe167006e; + DBOP_CTRL = 0x41008; + + GPIOB_AFSEL = 0xfc; + GPIOC_AFSEL = 0xff; + + DBOP_TIMPOL_23 = 0x6000e; + DBOP_CTRL = 0x51008; + DBOP_TIMPOL_01 = 0x6e167; + DBOP_TIMPOL_23 = 0xa167e06f; + + /* TODO: More... */ +} + +static void lcd_write_reg(int reg, int value) +{ + DBOP_CTRL &= ~(1<<14); + + DBOP_TIMPOL_23 = 0xa167006e; + + DBOP_DOUT = reg; + + /* Wait for fifo to empty */ + while ((DBOP_STAT & (1<<10)) == 0); + + DBOP_TIMPOL_23 = 0xa167e06f; + + + DBOP_DOUT = value; + + /* Wait for fifo to empty */ + while ((DBOP_STAT & (1<<10)) == 0); +} + +void lcd_write_data(const fb_data* p_bytes, int count) +{ + (void)p_bytes; + (void)count; +} + + +/*** hardware configuration ***/ + +void lcd_set_contrast(int val) +{ + (void)val; +} + +void lcd_set_invert_display(bool yesno) +{ + (void)yesno; +} + +static void flip_lcd(bool yesno) +{ + (void)yesno; +} + + +/* turn the display upside down (call lcd_update() afterwards) */ +void lcd_set_flip(bool yesno) +{ + display_flipped = yesno; + xoffset = yesno ? 4 : 0; + + if (display_on) + flip_lcd(yesno); +} + +static void _display_on(void) +{ + /* Initialisation the display the same way as the original firmware */ + + lcd_write_reg(R_START_OSC, 0x0001); /* Start Oscilation */ + + lcd_write_reg(R_DRV_OUTPUT_CONTROL, 0x011b); /* 220 lines, GS=0, SS=1 */ + + /* B/C = 1: n-line inversion form + * EOR = 1: polarity inversion occurs by applying an EOR to odd/even + * frame select signal and an n-line inversion signal. + * FLD = 01b: 1 field interlaced scan, external display iface */ + lcd_write_reg(R_DRV_WAVEFORM_CONTROL, 0x0700); + + /* Address counter updated in horizontal direction; left to right; + * vertical increment horizontal increment. + * data format for 8bit transfer or spi = 65k (5,6,5) */ + lcd_write_reg(R_ENTRY_MODE, 0x0030); + + /* Replace data on writing to GRAM */ + lcd_write_reg(R_COMPARE_REG1, 0); + lcd_write_reg(R_COMPARE_REG2, 0); + + lcd_write_reg(R_DISP_CONTROL1, 0x0000); /* GON = 0, DTE = 0, D1-0 = 00b */ + + /* Front porch lines: 2; Back porch lines: 2; */ + lcd_write_reg(R_DISP_CONTROL2, 0x0203); + + /* Scan cycle = 0 frames */ + lcd_write_reg(R_DISP_CONTROL3, 0x0000); + + /* 16 clocks */ + lcd_write_reg(R_FRAME_CYCLE_CONTROL, 0x0000); + + /* 18-bit RGB interface (one transfer/pixel) + * internal clock operation; + * System interface/VSYNC interface */ + lcd_write_reg(R_EXT_DISP_IF_CONTROL, 0x0000); + + + /* zero everything*/ + lcd_write_reg(R_POWER_CONTROL1, 0x0000); /* STB = 0, SLP = 0 */ + + lcd_delay(10); + + /* initialise power supply */ + + /* DC12-10 = 000b: Step-up1 = clock/8, + * DC02-00 = 000b: Step-up2 = clock/16, + * VC2-0 = 010b: VciOUT = 0.87 * VciLVL */ + lcd_write_reg(R_POWER_CONTROL2, 0x0002); + + /* VRH3-0 = 1000b: Vreg1OUT = REGP * 1.90 */ + lcd_write_reg(R_POWER_CONTROL3, 0x0008); + + lcd_delay(40); + + lcd_write_reg(R_POWER_CONTROL4, 0x0000); /* VCOMG = 0 */ + + /* This register is unknown */ + lcd_write_reg(0x56, 0x80f); + + + lcd_write_reg(R_POWER_CONTROL1, 0x4140); + + lcd_delay(10); + + lcd_write_reg(R_POWER_CONTROL2, 0x0000); + lcd_write_reg(R_POWER_CONTROL3, 0x0013); + + lcd_delay(20); + + lcd_write_reg(R_POWER_CONTROL4, 0x6d0e); + + lcd_delay(20); + + lcd_write_reg(R_POWER_CONTROL4, 0x6d0e); + + lcd_write_reg(R_GAMMA_FINE_ADJ_POS1, 0x0002); + lcd_write_reg(R_GAMMA_FINE_ADJ_POS2, 0x0707); + lcd_write_reg(R_GAMMA_FINE_ADJ_POS3, 0x0182); + lcd_write_reg(R_GAMMA_GRAD_ADJ_POS, 0x0203); + lcd_write_reg(R_GAMMA_FINE_ADJ_NEG1, 0x0706); + lcd_write_reg(R_GAMMA_FINE_ADJ_NEG2, 0x0006); + lcd_write_reg(R_GAMMA_FINE_ADJ_NEG3, 0x0706); + lcd_write_reg(R_GAMMA_GRAD_ADJ_NEG, 0x0000); + lcd_write_reg(R_GAMMA_AMP_ADJ_RES_POS, 0x030f); + lcd_write_reg(R_GAMMA_AMP_AVG_ADJ_RES_NEG, 0x0f08); + + + lcd_write_reg(R_RAM_ADDR_SET, 0); + lcd_write_reg(R_GATE_SCAN_POS, 0); + lcd_write_reg(R_VERT_SCROLL_CONTROL, 0); + + lcd_write_reg(R_1ST_SCR_DRV_POS, 219 << 8); + lcd_write_reg(R_2ND_SCR_DRV_POS, 219 << 8); + + lcd_write_reg(R_HORIZ_RAM_ADDR_POS, 175 << 8); + lcd_write_reg(R_VERT_RAM_ADDR_POS, 219 << 8); + + + lcd_write_reg(R_DISP_CONTROL1, 0x0037); + + display_on=true; /* must be done before calling lcd_update() */ + lcd_update(); +} + +/* LCD init */ +void lcd_init_device(void) +{ + ams3525_dbop_init(); + + /* Init GPIOs the same as the OF */ + + GPIOA_DIR |= (1<<5); + GPIOA_PIN(5) = 0; + + GPIOA_PIN(3) = (1<<3); + + GPIOA_DIR |= (3<<3); + + GPIOA_PIN(3) = (1<<3); + + GPIOA_PIN(4) = 0; //c80b0040 := 0; + + GPIOA_DIR |= (1<<7); + GPIOA_PIN(7) = 0; + + CCU_IO &= ~(1<<2); + CCU_IO &= ~(1<<3); + + GPIOD_DIR |= (1<<7); + +#if 0 + /* TODO: This code is conditional on a variable in the OF init, we need to + work out what it means */ + + GPIOD_PIN(7) = (1<<7); + GPIOD_DIR |= (1<<7); +#endif + + lcd_delay(1); + + GPIOA_PIN(5) = (1<<5); + + lcd_delay(1); + + _display_on(); +} + +void lcd_enable(bool on) +{ + if(display_on!=on) + { + if(on) + { + _display_on(); + lcd_call_enable_hook(); + } + else + { + /* TODO: Implement off sequence */ + display_on=false; + } + } +} + +bool lcd_enabled(void) +{ + return display_on; +} + +/*** update functions ***/ + +/* Performance function to blit a YUV bitmap directly to the LCD + * src_x, src_y, width and height should be even + * x, y, width and height have to be within LCD bounds + */ +void lcd_blit_yuv(unsigned char * const src[3], + int src_x, int src_y, int stride, + int x, int y, int width, int height) +{ + (void)src; + (void)src_x; + (void)src_y; + (void)stride; + (void)x; + (void)y; + (void)width; + (void)height; +} + +/* Update the display. + This must be called after all other LCD functions that change the display. */ +void lcd_update(void) ICODE_ATTR; +void lcd_update(void) +{ + if(display_on){ + /* TODO */ + } +} + + +/* Update a fraction of the display. */ +void lcd_update_rect(int, int, int, int) ICODE_ATTR; +void lcd_update_rect(int x, int y, int width, int height) +{ + (void)x; + (void)y; + (void)width; + (void)height; + + if(display_on) { + /* TODO */ + } +} diff --git a/firmware/target/arm/as3525/sansa-e200v2/system-target.h b/firmware/target/arm/as3525/sansa-e200v2/system-target.h new file mode 100644 index 0000000000..b712d1c124 --- /dev/null +++ b/firmware/target/arm/as3525/sansa-e200v2/system-target.h @@ -0,0 +1,28 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2008 ?? + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#ifndef SYSTEM_TARGET_H +#define SYSTEM_TARGET_H + +#include "system-arm.h" + +#define CPUFREQ_MAX 250000000 + +#endif /* SYSTEM_TARGET_H */ diff --git a/firmware/target/arm/as3525/sansa-e200v2/timer-target.h b/firmware/target/arm/as3525/sansa-e200v2/timer-target.h new file mode 100644 index 0000000000..b81da57885 --- /dev/null +++ b/firmware/target/arm/as3525/sansa-e200v2/timer-target.h @@ -0,0 +1,38 @@ +/*************************************************************************** +* __________ __ ___. +* Open \______ \ ____ ____ | | _\_ |__ _______ ___ +* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / +* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < +* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ +* \/ \/ \/ \/ \/ +* $Id$ +* +* Copyright (C) 2008 ?? +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version 2 +* of the License, or (at your option) any later version. +* +* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY +* KIND, either express or implied. +* +****************************************************************************/ +#ifndef TIMER_TARGET_H +#define TIMER_TARGET_H + +bool __timer_set(long cycles, bool set); +bool __timer_register(void); +void __timer_unregister(void); + +#define __TIMER_SET(cycles, set) \ + __timer_set(cycles, set) + +#define __TIMER_REGISTER(reg_prio, unregister_callback, cycles, \ + int_prio, timer_callback) \ + __timer_register() + +#define __TIMER_UNREGISTER(...) \ + __timer_unregister() + +#endif /* TIMER_TARGET_H */ diff --git a/firmware/target/arm/as3525/sansa-m200v2/adc-target.h b/firmware/target/arm/as3525/sansa-m200v2/adc-target.h new file mode 100644 index 0000000000..bea0272496 --- /dev/null +++ b/firmware/target/arm/as3525/sansa-m200v2/adc-target.h @@ -0,0 +1,24 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2008 ?? + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#ifndef _ADC_TARGET_H_ +#define _ADC_TARGET_H_ + +#endif /* _ADC_TARGET_H_ */ diff --git a/firmware/target/arm/as3525/sansa-m200v2/backlight-target.h b/firmware/target/arm/as3525/sansa-m200v2/backlight-target.h new file mode 100644 index 0000000000..9533d0a6b5 --- /dev/null +++ b/firmware/target/arm/as3525/sansa-m200v2/backlight-target.h @@ -0,0 +1,37 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2008 ?? + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#ifndef BACKLIGHT_TARGET_H +#define BACKLIGHT_TARGET_H + +static inline bool _backlight_init(void) +{ + return true; +} + +static inline void _backlight_on(void) +{ +} + +static inline void _backlight_off(void) +{ +} + +#endif diff --git a/firmware/target/arm/as3525/sansa-m200v2/button-m200v2.c b/firmware/target/arm/as3525/sansa-m200v2/button-m200v2.c new file mode 100644 index 0000000000..cd31d06720 --- /dev/null +++ b/firmware/target/arm/as3525/sansa-m200v2/button-m200v2.c @@ -0,0 +1,43 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2008 by ?? + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#include "config.h" +#include "cpu.h" +#include "button.h" +#include "adc.h" + +void button_init_device(void) +{ + +} + +int button_read_device(void) +{ + int btn = BUTTON_NONE; + + return btn; +} + +bool button_hold(void) +{ + /* TODO */ + return false; +} diff --git a/firmware/target/arm/as3525/sansa-m200v2/button-target.h b/firmware/target/arm/as3525/sansa-m200v2/button-target.h new file mode 100644 index 0000000000..acf80b2ed7 --- /dev/null +++ b/firmware/target/arm/as3525/sansa-m200v2/button-target.h @@ -0,0 +1,54 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2007 by Dave Chapman + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#ifndef _BUTTON_TARGET_H_ +#define _BUTTON_TARGET_H_ + +#include +#include "config.h" + +#define HAS_BUTTON_HOLD + +void button_init_device(void); +int button_read_device(void); +bool button_hold(void); + +/* Main unit's buttons */ +#define BUTTON_MENU 0x00000001 +#define BUTTON_VOLUP 0x00000002 +#define BUTTON_VOLDOWN 0x00000004 +#define BUTTON_PLAYPAUSE 0x00000008 +#define BUTTON_REPEATAB 0x00000010 +#define BUTTON_LEFT 0x00000020 +#define BUTTON_RIGHT 0x00000040 +#define BUTTON_SELECT 0x00000080 + +#define BUTTON_MAIN (BUTTON_MENU|BUTTON_VOLUP|BUTTON_VOLDOWN\ + |BUTTON_PLAYPAUSE|BUTTON_REPEATAB|BUTTON_LEFT\ + |BUTTON_RIGHT|BUTTON_SELECT) + +#define BUTTON_REMOTE 0 + +/* Software power-off */ +#define POWEROFF_BUTTON BUTTON_MENU +#define POWEROFF_COUNT 40 + +#endif /* _BUTTON_TARGET_H_ */ diff --git a/firmware/target/arm/as3525/sansa-m200v2/system-target.h b/firmware/target/arm/as3525/sansa-m200v2/system-target.h new file mode 100644 index 0000000000..b712d1c124 --- /dev/null +++ b/firmware/target/arm/as3525/sansa-m200v2/system-target.h @@ -0,0 +1,28 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2008 ?? + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#ifndef SYSTEM_TARGET_H +#define SYSTEM_TARGET_H + +#include "system-arm.h" + +#define CPUFREQ_MAX 250000000 + +#endif /* SYSTEM_TARGET_H */ diff --git a/firmware/target/arm/as3525/sansa-m200v2/timer-target.h b/firmware/target/arm/as3525/sansa-m200v2/timer-target.h new file mode 100644 index 0000000000..b81da57885 --- /dev/null +++ b/firmware/target/arm/as3525/sansa-m200v2/timer-target.h @@ -0,0 +1,38 @@ +/*************************************************************************** +* __________ __ ___. +* Open \______ \ ____ ____ | | _\_ |__ _______ ___ +* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / +* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < +* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ +* \/ \/ \/ \/ \/ +* $Id$ +* +* Copyright (C) 2008 ?? +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version 2 +* of the License, or (at your option) any later version. +* +* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY +* KIND, either express or implied. +* +****************************************************************************/ +#ifndef TIMER_TARGET_H +#define TIMER_TARGET_H + +bool __timer_set(long cycles, bool set); +bool __timer_register(void); +void __timer_unregister(void); + +#define __TIMER_SET(cycles, set) \ + __timer_set(cycles, set) + +#define __TIMER_REGISTER(reg_prio, unregister_callback, cycles, \ + int_prio, timer_callback) \ + __timer_register() + +#define __TIMER_UNREGISTER(...) \ + __timer_unregister() + +#endif /* TIMER_TARGET_H */ -- cgit