From 41997d3d89ed72c49a2dc5ac7f0aaa15093f5aba Mon Sep 17 00:00:00 2001 From: Daniel Ankers Date: Thu, 31 Aug 2006 19:45:05 +0000 Subject: Clean up crt0.S and move it to the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10830 a1c6a512-1295-4272-9138-f99709370657 --- firmware/target/sh/crt0.S | 214 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 214 insertions(+) create mode 100644 firmware/target/sh/crt0.S (limited to 'firmware/target/sh/crt0.S') diff --git a/firmware/target/sh/crt0.S b/firmware/target/sh/crt0.S new file mode 100644 index 0000000000..87cef56e96 --- /dev/null +++ b/firmware/target/sh/crt0.S @@ -0,0 +1,214 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2002 by Linus Nielsen Feltzing + * + * All files in this archive are subject to the GNU General Public License. + * See the file COPYING in the source tree root for full license agreement. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#include "config.h" +#include "cpu.h" + + .section .init.text,"ax",@progbits + + .global start +start: + + mov.l .vbr_k,r1 +#ifdef DEBUG + /* If we have built our code to be loaded via the standalone GDB + * stub, we will have out VBR at some other location than 0x9000000. + * We must copy the trap vectors for the GDB stub to our vector table. */ + mov.l .orig_vbr_k,r2 + + /* Move the invalid instruction vector (4) */ + mov #4,r0 + shll2 r0 + mov.l @(r0,r2),r3 + mov.l r3,@(r0,r1) + + /* Move the invalid slot vector (6) */ + mov #6,r0 + shll2 r0 + mov.l @(r0,r2),r3 + mov.l r3,@(r0,r1) + + /* Move the bus error vector (9) */ + mov #9,r0 + shll2 r0 + mov.l @(r0,r2),r3 + mov.l r3,@(r0,r1) + + /* Move the DMA bus error vector (10) */ + mov #10,r0 + shll2 r0 + mov.l @(r0,r2),r3 + mov.l r3,@(r0,r1) + + /* Move the NMI vector as well (11) */ + mov #11,r0 + shll2 r0 + mov.l @(r0,r2),r3 + mov.l r3,@(r0,r1) + + /* Move the UserBreak vector as well (12) */ + mov #12,r0 + shll2 r0 + mov.l @(r0,r2),r3 + mov.l r3,@(r0,r1) + + /* Move the breakpoint trap vector (32) */ + mov #32,r0 + shll2 r0 + mov.l @(r0,r2),r3 + mov.l r3,@(r0,r1) + + /* Move the IO trap vector (33) */ + mov #33,r0 + shll2 r0 + mov.l @(r0,r2),r3 + mov.l r3,@(r0,r1) + + /* Move the serial Rx interrupt vector (105) */ + mov #105,r0 + shll2 r0 + mov.l @(r0,r2),r3 + mov.l r3,@(r0,r1) + + /* Move the single step trap vector (127) */ + mov #127,r0 + shll2 r0 + mov.l @(r0,r2),r3 + mov.l r3,@(r0,r1) +#endif /* DEBUG */ + ldc r1,vbr + + mov #0,r0 + ldc r0,gbr + + /* zero out .ibss */ + mov.l .iedata_k,r0 + mov.l .iend_k,r1 + bra .iedatastart + mov #0,r2 +.iedataloop: /* backwards is faster and shorter */ + mov.l r2,@-r1 +.iedatastart: + cmp/hi r0,r1 + bt .iedataloop + + /* copy the .iram section */ + mov.l .iramcopy_k,r0 + mov.l .iram_k,r1 + mov.l .iramend_k,r2 + /* Note: We cannot put a PC relative load into the delay slot of a 'bra' + instruction (the offset would be wrong), but there is nothing else to + do before the loop, so the delay slot would be 'nop'. The cmp / bf + sequence is the same length, but more efficient. */ + cmp/hi r1,r2 + bf .noiramcopy +.iramloop: + mov.l @r0+,r3 + mov.l r3,@r1 + add #4,r1 + cmp/hi r1,r2 + bt .iramloop +.noiramcopy: + + /* zero out bss */ + mov.l .edata_k,r0 + mov.l .end_k,r1 + bra .edatastart + mov #0,r2 +.edataloop: /* backwards is faster and shorter */ + mov.l r2,@-r1 +.edatastart: + cmp/hi r0,r1 + bt .edataloop + + /* copy the .data section, for rombased execution */ + mov.l .datacopy_k,r0 + mov.l .data_k,r1 + cmp/eq r0,r1 + bt .nodatacopy /* Don't copy if src and dest are equal */ + mov.l .dataend_k,r2 + cmp/hi r1,r2 + bf .nodatacopy +.dataloop: + mov.l @r0+,r3 + mov.l r3,@r1 + add #4,r1 + cmp/hi r1,r2 + bt .dataloop +.nodatacopy: + + /* Munge the main thread stack */ + mov.l .stackbegin_k,r0 + mov.l .stackend_k,r1 + mov r1,r15 + mov.l .deadbeef_k,r2 +.mungeloop: /* backwards is faster and shorter */ + mov.l r2,@-r1 + cmp/hi r0,r1 + bt .mungeloop + + /* call the mainline */ + mov.l .main_k,r0 + jsr @r0 + nop +.hoo: + bra .hoo + nop + + .align 2 +.vbr_k: + .long vectors +#ifdef DEBUG +.orig_vbr_k: + .long 0x09000000 +#endif +.iedata_k: + .long _iedata +.iend_k: + .long _iend +.iramcopy_k: + .long _iramcopy +.iram_k: + .long _iramstart +.iramend_k: + .long _iramend +.edata_k: + .long _edata +.end_k: + .long _end +.datacopy_k: + .long _datacopy +.data_k: + .long _datastart +.dataend_k: + .long _dataend +.stackbegin_k: + .long _stackbegin +.stackend_k: + .long _stackend +.deadbeef_k: + .long 0xdeadbeef +.main_k: + .long _main + + .section .resetvectors +vectors: + .long start + .long _stackend + .long start + .long _stackend -- cgit