/***************************************************************************
 *             __________               __   ___.
 *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
 *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
 *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
 *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
 *                     \/            \/     \/    \/            \/
 * $Id$
 *
 * Copyright (C) 2007 by Linus Nielsen Feltzing
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 ****************************************************************************/
#include "config.h"

#include <stdlib.h>
#include <stdio.h>
#include "inttypes.h"
#include "string.h"
#include "cpu.h"
#include "system.h"
#include "lcd.h"
#include "lcd-remote.h"
#include "scroll_engine.h"
#include "../kernel-internal.h"
#include "storage.h"
#include "file_internal.h"
#include "usb.h"
#include "disk.h"
#include "font.h"
#include "adc.h"
#include "backlight.h"
#include "backlight-target.h"
#include "button.h"
#include "panic.h"
#include "power.h"
#include "powermgmt.h"
#include "file.h"
#include "eeprom_settings.h"
#include "rbunicode.h"
#include "pcf50606.h"
#include "common.h"
#include "rb-loader.h"
#include "loader_strerror.h"
#include "isp1362.h"
#include "version.h"

#include <stdarg.h>

/* Maximum allowed firmware image size. 10MB is more than enough */
#define MAX_LOADSIZE (10*1024*1024)

#define DRAM_START 0x31000000

/* From common.c */
extern int line;
extern int remote_line;

static bool recovery_mode = false;

/* Reset the cookie for the crt0 crash check */
inline void __reset_cookie(void)
{
    asm(" move.l #0,%d0");
    asm(" move.l %d0,0x10017ffc");
}

void start_iriver_fw(void)
{
    asm(" move.w #0x2700,%sr");
    __reset_cookie();
    asm(" movec.l %d0,%vbr");
    asm(" move.l 0,%sp");
    asm(" lea.l 8,%a0");
    asm(" jmp (%a0)");
}

void start_firmware(void)
{
    asm(" move.w #0x2700,%sr");
    __reset_cookie();
    asm(" move.l %0,%%d0" :: "i"(DRAM_START));
    asm(" movec.l %d0,%vbr");
    asm(" move.l %0,%%sp" :: "m"(*(int *)DRAM_START));
    asm(" move.l %0,%%a0" :: "m"(*(int *)(DRAM_START+4)));
    asm(" jmp (%a0)");
}

void start_flashed_romimage(void)
{
    uint8_t *src = (uint8_t *)FLASH_ROMIMAGE_ENTRY;
    uint32_t *reset_vector;

    if (!detect_flashed_romimage())
        return ;

    reset_vector = (uint32_t *)(&src[sizeof(struct flash_header)+sizeof(uint32_t)]);

    asm(" move.w #0x2700,%sr");
    __reset_cookie();

    asm(" move.l %0,%%d0" :: "i"(DRAM_START));
    asm(" movec.l %d0,%vbr");
    asm(" move.l %0,%%sp" :: "m"(reset_vector[0]));
    asm(" move.l %0,%%a0" :: "m"(reset_vector[1]));
    asm(" jmp (%a0)");

    /* Failure */
    power_off();
}

void start_flashed_ramimage(void)
{
    struct flash_header hdr;
    uint8_t *buf = (uint8_t *)DRAM_START;
    uint8_t *src = (uint8_t *)FLASH_RAMIMAGE_ENTRY;

    if (!detect_flashed_ramimage())
         return;

    /* Load firmware from flash */
    cpu_boost(true);
    memcpy(&hdr, src, sizeof(struct flash_header));
    src += sizeof(struct flash_header);
    memcpy(buf, src, hdr.length);
    cpu_boost(false);

    start_firmware();

    /* Failure */
    power_off();
}

void shutdown(void)
{
    printf("Shutting down...");
    /* Reset the rockbox crash check. */
    firmware_settings.bl_version = 0;
    eeprom_settings_store();

    /* We need to gracefully spin down the disk to prevent clicks. */
    if (ide_powered())
    {
        /* Make sure ATA has been initialized. */
        storage_init();

        /* And put the disk into sleep immediately. */
        storage_sleepnow();
    }

    sleep(HZ*2);

    /* Backlight OFF */
    backlight_hw_off();
    remote_backlight_hw_off();

    __reset_cookie();
    power_off();
}

/* Print the battery voltage (and a warning message). */
void check_battery(void)
{
    int battery_voltage, batt_int, batt_frac;

    battery_voltage = _battery_voltage();
    batt_int = battery_voltage / 1000;
    batt_frac = (battery_voltage % 1000) / 10;

    printf("Batt: %d.%02dV", batt_int, batt_frac);

    if (battery_voltage <= 310)
    {
        printf("WARNING! BATTERY LOW!!");
        sleep(HZ*2);
    }
}

void initialize_eeprom(void)
{
    if (detect_original_firmware())
        return ;

    if (!eeprom_settings_init())
    {
        recovery_mode = true;
        return ;
    }

    /* If bootloader version has not been reset, disk might
     * not be intact. */
    if (firmware_settings.bl_version || !firmware_settings.disk_clean)
    {
        firmware_settings.disk_clean = false;
        recovery_mode = true;
    }

    firmware_settings.bl_version = EEPROM_SETTINGS_BL_MINVER;
    eeprom_settings_store();
}

void try_flashboot(void)
{
    if (!firmware_settings.initialized)
        return ;

    switch (firmware_settings.bootmethod)
    {
        case BOOT_DISK:
            return;

        case BOOT_ROM:
            start_flashed_romimage();
            break;

        case BOOT_RAM:
            start_flashed_ramimage();
            break;

        case BOOT_RECOVERY:
            break;
    }

    recovery_mode = true;
}

void failsafe_menu(void)
{
    static const char *options[] =
    {
        "Boot from disk",
        "Boot RAM image",
        "Boot ROM image",
        "Shutdown"
    };
    const int FAILSAFE_OPTIONS = sizeof(options) / sizeof(*options);
    const long TIMEOUT = 15 * HZ;
    long start_tick = current_tick;
    int option = 3;
    int button;
    int defopt = -1;
    char buf[32];
    int i;

    reset_screen();
    printf("Bootloader %s", rbversion);
    check_battery();
    printf("=========================");
    line += FAILSAFE_OPTIONS;
    printf("");
    printf("  [NAVI] to confirm.");
    printf("  [REC] to set as default.");
    printf("");

    if (firmware_settings.initialized)
    {
        defopt = firmware_settings.bootmethod;
        if (defopt < 0 || defopt >= FAILSAFE_OPTIONS)
            defopt = option;
    }

    while (current_tick - start_tick < TIMEOUT)
    {
        /* Draw the menu. */
        line = 3;
        for (i = 0; i < FAILSAFE_OPTIONS; i++)
        {
            char *def = "[DEF]";
            char *arrow = "->";

            if (i != defopt)
                def = "";
            if (i != option)
                arrow = "  ";

            printf("%s %s %s", arrow, options[i], def);
        }

        snprintf(buf, sizeof(buf), "Time left: %lds",
                 (TIMEOUT - (current_tick - start_tick)) / HZ);
        lcd_puts(0, 10, buf);
        lcd_update();
        button = button_get_w_tmo(HZ);

        if (button == BUTTON_NONE || button & SYS_EVENT)
            continue ;

        start_tick = current_tick;

        /* Ignore the ON/PLAY -button because it can cause trouble
           with the RTC alarm mod. */
        switch (button & ~(BUTTON_ON))
        {
            case BUTTON_UP:
            case BUTTON_RC_REW:
                if (option > 0)
                    option--;
                break ;

            case BUTTON_DOWN:
            case BUTTON_RC_FF:
                if (option < FAILSAFE_OPTIONS-1)
                    option++;
                break ;

            case BUTTON_SELECT:
            case BUTTON_RC_ON:
                goto execute;

            case BUTTON_REC:
            case BUTTON_RC_REC:
                if (firmware_settings.initialized)
                {
                    firmware_settings.bootmethod = option;
                    eeprom_settings_store();
                    defopt = option;
                }
                break ;
        }
    }

    execute:

    lcd_puts(0, 10, "Executing command...");
    lcd_update();
    sleep(HZ);
    reset_screen();

    switch (option)
    {
        case BOOT_DISK:
            return ;

        case BOOT_RAM:
            start_flashed_ramimage();
            printf("Image not found");
            break;

        case BOOT_ROM:
            start_flashed_romimage();
            printf("Image not found");
            break;
    }

    shutdown();
}

/* From the pcf50606 driver */
extern unsigned char pcf50606_intregs[3];

void main(void)
{
    int i;
    int rc;
    bool rc_on_button = false;
    bool on_button = false;
    bool rec_button = false;
    bool hold_status = false;
    int data;
    bool rtc_alarm;
    int mask;
    bool usb_charge = false;

    /* We want to read the buttons as early as possible, before the user
       releases the ON button */

    /* Set GPIO33, GPIO37, GPIO38  and GPIO52 as general purpose inputs
       (The ON and Hold buttons on the main unit and the remote) */
    or_l(0x00100062, &GPIO1_FUNCTION);
    and_l(~0x00100062, &GPIO1_ENABLE);

    data = GPIO1_READ;
    if ((data & 0x20) == 0)
        on_button = true;

    if ((data & 0x40) == 0)
        rc_on_button = true;

    /* Set the default state of the hard drive power to OFF */
    ide_power_enable(false);

    power_init();

    /* Check the interrupt registers if it was an RTC alarm */
    rtc_alarm = (pcf50606_intregs[0] & 0x80)?true:false;

    /* Turn off if we believe the start was accidental */
    if(!(rtc_alarm || on_button || rc_on_button ||
         (usb_detect() == USB_INSERTED) || charger_inserted())) {
        __reset_cookie();
        power_off();
    }

    /* get rid of a nasty humming sound during boot */
    mask = disable_irq_save();
    pcf50606_write(0x3b, 0x00);  /* GPOOD2 high Z */
    pcf50606_write(0x3b, 0x07);  /* GPOOD2 low */
    restore_irq(mask);

    /* Start with the main backlight OFF. */
    backlight_hw_init();
    backlight_hw_off();

    /* Remote backlight ON */
    remote_backlight_hw_on();

    system_init();
    kernel_init();

    /* Set up waitstates for the peripherals */
    set_cpu_frequency(0); /* PLL off */
    coldfire_set_pllcr_audio_bits(DEFAULT_PLLCR_AUDIO_BITS);
    enable_irq();

    initialize_eeprom();

    isp1362_init();

    adc_init();
    button_init();
    sleep(HZ/50); /* Allow the button driver to check the buttons */

    /* Only check remote hold status if remote power button was actually used. */
    if (rc_on_button)
    {
        lcd_remote_init();

        if (remote_button_hold())
            hold_status = true;
    }

    /* Check main hold switch status too. */
    if (on_button && button_hold())
    {
        hold_status = true;
    }

    /* Power on the hard drive early, to speed up the loading. */
    if (!hold_status && !recovery_mode)
    {
        ide_power_enable(true);

        if (usb_detect() != USB_INSERTED)
            try_flashboot();
    }

    lcd_init();

    if (!rc_on_button)
        lcd_remote_init();

    font_init();

    lcd_setfont(FONT_SYSFIXED);

    backlight_init(); /* BUGFIX backlight_init MUST BE AFTER lcd_init */

    printf("Rockbox boot loader");
    printf("Version %s", rbversion);

    rec_button = ((button_status() & BUTTON_REC) == BUTTON_REC)
        || ((button_status() & BUTTON_RC_REC) == BUTTON_RC_REC);

    check_battery();

    if(rtc_alarm)
        printf("RTC alarm detected");

    /* Holding REC while starting runs the original firmware */
    if (detect_original_firmware() && rec_button)
    {
        printf("Starting original firmware...");
        start_iriver_fw();
    }

    /* enable usb charging for charge mode and disk mode */
    if (usb_detect() == USB_INSERTED)
    {
        usb_charging_enable(USB_CHARGING_ENABLE);
        usb_charge = true;
    }

    if(charger_inserted())
    {
        const char charging_msg[] = "Charging...";
        const char complete_msg[] = "Charging complete";
        const char *msg;
        int w, h;
        bool blink_toggle = false;
        bool request_start = false;

        cpu_idle_mode(true);

        while(charger_inserted() && !request_start)
        {
            long button = button_get_w_tmo(HZ);

            switch(button)
            {
            case BUTTON_ON:
                request_start = true;
                break;

            case BUTTON_NONE: /* Timeout */

                if(charging_state())
                {
                    /* To be replaced with a nice animation */
                    blink_toggle = !blink_toggle;
                    msg = charging_msg;
                }
                else
                {
                    blink_toggle = true;
                    msg = complete_msg;
                }

                font_getstringsize(msg, &w, &h, FONT_SYSFIXED);
                reset_screen();
                if(blink_toggle)
                    lcd_putsxy((LCD_WIDTH-w)/2, (LCD_HEIGHT-h)/2, msg);

                check_battery();
                break;
            }
        }
        if(!request_start)
        {
            __reset_cookie();
            power_off();
        }

        cpu_idle_mode(false);
    }

    usb_init();

    /* A hack to enter USB mode without using the USB thread */
    if(usb_detect() == USB_INSERTED)
    {
        const char msg[] = "Bootloader USB mode";
        int w, h;
        font_getstringsize(msg, &w, &h, FONT_SYSFIXED);
        reset_screen();
        lcd_putsxy((LCD_WIDTH-w)/2, (LCD_HEIGHT-h)/2, msg);
        lcd_update();

        lcd_remote_puts(0, 3, msg);
        lcd_remote_update();

        if (firmware_settings.initialized)
        {
            firmware_settings.disk_clean = false;
            eeprom_settings_store();
        }

        ide_power_enable(true);
        storage_enable(false);
        sleep(HZ/20);
        usb_enable(true);
        cpu_idle_mode(true);
        while (usb_detect() == USB_INSERTED)
        {
            /* Print the battery status. */
            line = 0;
            remote_line = 0;
            check_battery();

            storage_spin(); /* Prevent the drive from spinning down */
            sleep(HZ);
        }

        cpu_idle_mode(false);
        usb_enable(false);

        reset_screen();
        lcd_update();
    }

    /* disable usb charging if we enabled it earlier */
    if (usb_charge)
    {
        usb_charging_enable(USB_CHARGING_DISABLE);
        usb_charge = false;
    }

    /* recheck the hold switch status as it may have changed */
    hold_status = (button_hold() || remote_button_hold());

    /* hold switch shutdown or failsafe recovery mode */
    if (hold_status || recovery_mode)
    {
        if (detect_original_firmware())
        {
            printf("Hold switch on");
            shutdown();
        }

        failsafe_menu();
    }

    rc = storage_init();
    if(rc)
    {
        reset_screen();
        printf("ATA error: %d", rc);
        printf("Insert USB cable and press");
        printf("a button");
        while(!(button_get(true) & BUTTON_REL));
    }

    filesystem_init();

    rc = disk_mount_all();
    if (rc<=0)
    {
        reset_screen();
        printf("No partition found");
        while(button_get(true) != SYS_USB_CONNECTED) {};
    }

    printf("Loading firmware");
    i = load_firmware((unsigned char *)DRAM_START, BOOTFILE, MAX_LOADSIZE);
    if(i <= EFILE_EMPTY)
        printf("Error: %s", loader_strerror(i));

    if (i > 0)
        start_firmware();

    if (!detect_original_firmware())
    {
        printf("No firmware found on disk");
        sleep(HZ*2);
        shutdown();
    }
    else {
        sleep(HZ*2);
        start_iriver_fw();
    }
}

/* These functions are present in the firmware library, but we reimplement
   them here because the originals do a lot more than we want */
int usb_screen(void)
{
   return 0;
}

unsigned short *bidi_l2v(const unsigned char *str, int orientation)
{
    static unsigned short utf16_buf[SCROLL_LINE_SIZE];
    unsigned short *target;
    (void)orientation;

    target = utf16_buf;

    while (*str)
        str = utf8decode(str, target++);
    *target = 0;
    return utf16_buf;
}