/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2021 Aidan MacDonald * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #ifndef __AK4376_H__ #define __AK4376_H__ #define AUDIOHW_CAPS (FILTER_ROLL_OFF_CAP|POWER_MODE_CAP) #define AUDIOHW_HAVE_SHORT2_ROLL_OFF #define AK4376_MIN_VOLUME (-890) #define AK4376_MAX_VOLUME 150 AUDIOHW_SETTING(VOLUME, "dB", 1, 5, AK4376_MIN_VOLUME, AK4376_MAX_VOLUME, -200) AUDIOHW_SETTING(FILTER_ROLL_OFF, "", 0, 1, 0, 3, 0) AUDIOHW_SETTING(POWER_MODE, "", 0, 1, 0, 1, 0) /* Register addresses */ #define AK4376_REG_PWR1 0x00 #define AK4376_REG_PWR2 0x01 #define AK4376_REG_PWR3 0x02 #define AK4376_REG_PWR4 0x03 #define AK4376_REG_OUTPUT_MODE 0x04 #define AK4376_REG_CLOCK_MODE 0x05 #define AK4376_REG_FILTER 0x06 #define AK4376_REG_MIXER 0x07 #define AK4376_REG_LCH_VOLUME 0x0b #define AK4376_REG_RCH_VOLUME 0x0c #define AK4376_REG_AMP_VOLUME 0x0d #define AK4376_REG_PLL_CLK_SRC 0x0e #define AK4376_REG_PLL_REF_DIV1 0x0f #define AK4376_REG_PLL_REF_DIV2 0x10 #define AK4376_REG_PLL_FB_DIV1 0x11 #define AK4376_REG_PLL_FB_DIV2 0x12 #define AK4376_REG_DAC_CLK_SRC 0x13 #define AK4376_REG_DAC_CLK_DIV 0x14 #define AK4376_REG_AUDIO_IF_FMT 0x15 #define AK4376_REG_CHIP_ID 0x21 #define AK4376_REG_MODE_CTRL 0x24 #define AK4376_REG_ADJUST1 0x26 #define AK4376_REG_ADJUST2 0x2a #define AK4376_NUM_REGS 0x2b /* Mixer controls, simply OR them together. * LCH = add LCH signal to output * RCH = add RCH signal to output * HALF = multiply output by 1/2 * INVERT = invert the output after everything else */ #define AK4376_MIX_MUTE 0 #define AK4376_MIX_LCH 1 #define AK4376_MIX_RCH 2 #define AK4376_MIX_HALF 4 #define AK4376_MIX_INVERT 8 /* Min/max digital volumes in units of dB/10 */ #define AK4376_DIG_VOLUME_MIN (-120) #define AK4376_DIG_VOLUME_MAX 30 #define AK4376_DIG_VOLUME_STEP 5 #define AK4376_DIG_VOLUME_MUTE (AK4376_DIG_VOLUME_MIN - 1) /* Min/max headphone amp volumes in units of dB/10 */ #define AK4376_AMP_VOLUME_MIN (-200) #define AK4376_AMP_VOLUME_MAX 60 #define AK4376_AMP_VOLUME_STEP 20 #define AK4376_AMP_VOLUME_MUTE (AK4376_AMP_VOLUME_MIN - 1) /* Digital filters */ #define AK4376_FILTER_SHARP 0 #define AK4376_FILTER_SLOW 1 #define AK4376_FILTER_SHORT_SHARP 2 #define AK4376_FILTER_SHORT_SLOW 3 /* Frequency selection */ #define AK4376_FS_8 0 #define AK4376_FS_11 1 #define AK4376_FS_12 2 #define AK4376_FS_16 4 #define AK4376_FS_22 5 #define AK4376_FS_24 6 #define AK4376_FS_32 8 #define AK4376_FS_44 9 #define AK4376_FS_48 10 #define AK4376_FS_64 12 #define AK4376_FS_88 13 #define AK4376_FS_96 14 #define AK4376_FS_176 17 #define AK4376_FS_192 18 /* Functions to power on / off the DAC. * * NOTE: Target must call ak4376_set_frequency() after ak4376_open() to * finish the power-up sequence of the headphone amp. */ extern void ak4376_open(void); extern void ak4376_close(void); /* Register read/write. Cached to avoid redundant reads/writes. */ extern void ak4376_write(int reg, int value); extern int ak4376_read(int reg); /* Target-specific function to set the PDN pin level. */ extern void ak4376_set_pdn_pin(int level); /* Set overall output volume */ extern void ak4376_set_volume(int vol_l, int vol_r); /* Set the roll-off filter */ extern void ak4376_set_filter_roll_off(int val); /* Set audio sampling frequency and power mode. * * If the I2S master clock is being supplied externally, the caller must also * give the master clock multiplier 'mult'. The accepted values depend on the * sampling rate, see below: * * +-----------+------------------------+ * | frequency | master clock rate | * +-----------+------------------------+ * | 8 - 24 | 256fs / 512fs / 1024fs | * | 32 - 48 | 256fs / 512fs | * | 64 - 96 | 256fs | * | 128 - 192 | 128fs | * +-----------+------------------------+ * * Switching between high-power and low-power mode requires the same registers * and power-up / power-down sequences as a frequency switch, so both settings * are controlled by this function. * * high power mode -- use power_mode=0 * low power mode -- use power_mode=1 */ extern void ak4376_set_freqmode(int fsel, int mult, int power_mode); #endif /* __AK4376_H__ */