/* * This config file is for the Logik DAX MP3/DAB */ #define TARGET_TREE /* this target is using the target tree system */ /* For Rolo and boot loader */ #define MODEL_NUMBER 33 #define MODEL_NAME "Logik DAX MP3/DAB" /* define this if you have recording possibility */ //#define HAVE_RECORDING /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ //#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF) #if 0 /* Enable for USB driver test */ #define HAVE_USBSTACK #define USB_VENDOR_ID 0x13d1 #define USB_PRODUCT_ID 0x1002 #endif /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you can flip your LCD */ #define HAVE_LCD_FLIP /* define this if you can invert the colours on your LCD */ #define HAVE_LCD_INVERT /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you have access to the pitchscreen */ #define HAVE_PITCHSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE #define HAVE_FAT16SUPPORT /* define this if you have a flash memory storage */ #define HAVE_FLASH_STORAGE #define CONFIG_STORAGE STORAGE_NAND #define CONFIG_NAND NAND_TCC /* LCD dimensions */ #define LCD_WIDTH 128 #define LCD_HEIGHT 64 #define LCD_DEPTH 1 #define LCD_PIXELFORMAT VERTICAL_PACKING /* Display colours, for screenshots and sim (0xRRGGBB) */ #define LCD_DARKCOLOR 0x000000 #define LCD_BRIGHTCOLOR 0x5a915a #define LCD_BL_DARKCOLOR 0x000000 #define LCD_BL_BRIGHTCOLOR 0x82b4fa /* define this to indicate your device's keypad */ #define CONFIG_KEYPAD LOGIK_DAX_PAD /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_TCC77X /* define this if you have RTC RAM available for settings */ //#define HAVE_RTC_RAM /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x38000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x10000 #define AB_REPEAT_ENABLE 1 /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* The DAX uses built-in WM8731 codec */ #define HAVE_WM8731 /* Codec is slave on serial bus */ #define CODEC_SLAVE /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define CONFIG_I2C I2C_TCC77X #define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 50 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ /* define this if the unit should not shut down on low battery. */ #define NO_LOW_BATTERY_SHUTDOWN /* Define this if you have a TCC773L */ #define CONFIG_CPU TCC773L /* Define this if you have ATA power-off control */ #define HAVE_ATA_POWER_OFF #define HAVE_FAT16SUPPORT /* Define this to the CPU frequency */ #define CPU_FREQ 120000000 /* Offset ( in the firmware file's header ) to the file length */ #define FIRMWARE_OFFSET_FILE_LENGTH 0 /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 4 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 6 /* The start address index for ROM builds */ /* #define ROM_START 0x11010 for behind original Archos */ #define ROM_START 0x7010 /* for behind BootBox */ #define CONFIG_LCD LCD_SSD1815 #define BOOTFILE_EXT "logik" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/" #define IBSS_ATTR_VOICE_STACK #define ICODE_ATTR_TREMOR_NOT_MDCT #define ICODE_ATTR_TREMOR_MDCT #define ICODE_ATTR_FLAC #define IBSS_ATTR_FLAC_DECODED0 #define ICONST_ATTR_MPA_HUFFMAN #define IBSS_ATTR_MPC_SAMPLE_BUF #define ICODE_ATTR_ALAC #define IBSS_ATTR_SHORTEN_DECODED0 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */