/* * This config file is for the Apple iPod Mini 2nd Gen */ #define TARGET_TREE /* this target is using the target tree system */ #define IPOD_ARCH 1 #define MODEL_NAME "Apple iPod Mini 2g" /* For Rolo and boot loader */ #define MODEL_NUMBER 11 /* define this if you use an ATA controller */ #define CONFIG_STORAGE STORAGE_ATA /*define this if the ATA controller and method of USB access support LBA48 */ #define HAVE_LBA48 /* define this if you have recording possibility */ /*#define HAVE_RECORDING*/ /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \ SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) /* define the bitmask of recording sample rates #define REC_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \ SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */ /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you can invert the colours on your LCD */ #define HAVE_LCD_INVERT /* define this if the LCD needs to be shutdown */ #define HAVE_LCD_SHUTDOWN /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you have access to the pitchscreen */ #define HAVE_PITCHSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* LCD dimensions */ #define LCD_WIDTH 138 #define LCD_HEIGHT 110 #define LCD_DEPTH 2 /* 4 colours - 2bpp */ #define LCD_PIXELFORMAT HORIZONTAL_PACKING /* Display colours, for screenshots and sim (0xRRGGBB) */ #define LCD_DARKCOLOR 0x000000 #define LCD_BRIGHTCOLOR 0x648764 #define LCD_BL_DARKCOLOR 0x000000 #define LCD_BL_BRIGHTCOLOR 0xdfd8ff #define HAVE_LCD_CONTRAST /* LCD contrast */ #define MIN_CONTRAST_SETTING 5 #define MAX_CONTRAST_SETTING 63 #define DEFAULT_CONTRAST_SETTING 40 /* Match boot contrast */ /* define this if you can flip your LCD */ #define HAVE_LCD_FLIP #define CONFIG_KEYPAD IPOD_4G_PAD /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_PCF50605 /* Define if the device can wake from an RTC alarm */ #define HAVE_RTC_ALARM /* Define this if you can switch on/off the accessory power supply */ #define HAVE_ACCESSORY_SUPPLY /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 /* Define this if you have the WM8711 audio codec */ #define HAVE_WM8711 /* WM8721 has no tone controls, so we use the software ones */ #define HAVE_SW_TONE_CONTROLS #define AB_REPEAT_ENABLE 1 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE /* define this if you have a disk storage, i.e. something that needs spinups and can cause skips when shaked */ #define HAVE_DISK_STORAGE /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT /* We can fade the backlight by using PWM */ #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM /* define this if the unit uses a scrollwheel for navigation */ #define HAVE_SCROLLWHEEL /* define to activate advanced wheel acceleration code */ #define HAVE_WHEEL_ACCELERATION /* define from which rotation speed [degree/sec] on the acceleration starts */ #define WHEEL_ACCEL_START 270 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */ #define WHEEL_ACCELERATION 3 /* Define this if you can detect headphones */ #define HAVE_HEADPHONE_DETECTION #define BATTERY_CAPACITY_DEFAULT 400 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 400 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 1000 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 50 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ /* define current usage levels */ #define CURRENT_NORMAL 50 /* PP5024 uses ~40mA, so add some for disk */ #define CURRENT_BACKLIGHT 20 /* FIXME: This needs to be measured */ #define CURRENT_RECORD 110 /* FIXME: Needs to be measured */ /* Hardware controlled charging? */ #define CONFIG_CHARGING CHARGING_MONITOR /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* define this if the unit can have USB charging disabled by user - * if USB/MAIN power is discernable and hardware doesn't compel charging */ #define HAVE_USB_CHARGING_ENABLE /* Define this if you have a PortalPlayer PP5022 */ #define CONFIG_CPU PP5022 /* Define this if you want to use the PP5020 i2c interface */ #define CONFIG_I2C I2C_PP5020 /* We're able to shut off power to the HDD */ #define HAVE_ATA_POWER_OFF /* define this if the hardware can be powered off while charging */ //#define HAVE_POWEROFF_WHILE_CHARGING /* The start address index for ROM builds */ #define ROM_START 0x00000000 /* The size of the flash ROM */ #define FLASH_SIZE 0x100000 /* Define this to the CPU frequency */ #define CPU_FREQ 11289600 #define CONFIG_LCD LCD_IPODMINI /* Offset ( in the firmware file's header ) to the file length */ #define FIRMWARE_OFFSET_FILE_LENGTH 0 /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_ARC /* enable these for the experimental usb stack */ #define HAVE_USBSTACK #define USE_ROCKBOX_USB #define USB_VENDOR_ID 0x05ac #define USB_PRODUCT_ID 0x1205 #define HAVE_USB_HID_MOUSE /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ /* Define this if you can read an absolute wheel position */ #define HAVE_WHEEL_POSITION #define BOOTFILE_EXT "ipod" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define ICODE_ATTR_TREMOR_NOT_MDCT #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ #define HAVE_ATA_DMA /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY