/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * * * Copyright (C) 2009 by Jorge Pinto * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ /* * This config file is for the Lyre prototype 1. */ #define CONFIG_SDRAM_START 0x20000000 /* For Rolo and boot loader */ #define MODEL_NUMBER 130 /* define this if the flash memory uses the * SecureDigital Memory Card protocol */ #define CONFIG_STORAGE STORAGE_SD #define HAVE_FLASH_STORAGE /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR #define CONFIG_LCD LCD_LYRE_PROTO1 /* LCD dimensions */ #define LCD_WIDTH 128 #define LCD_HEIGHT 128 /* sqrt(128^2 + 128^2) / 1.8 = 100.6 */ #define LCD_DPI 101 /* The LCD used is just rgb444, 64 colours. We do a bit conversion on LCD * drivers. */ #define LCD_DEPTH 16 /* 65536 colours */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG #define CONFIG_KEYPAD LYRE_PROTO1_PAD /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x100000 /* Lyre prototype 1 do not use I2C, just SPI */ #define CONFIG_I2C I2C_NONE /* Define this if you have the TLV320 audio codec -> controlled by the DSP */ #define HAVE_TLV320 /* TLV320 has no tone controls, so we use the software ones */ #define HAVE_SW_TONE_CONTROLS #define BATTERY_CAPACITY_DEFAULT 1100 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 500 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 2500 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 100 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE #define CONFIG_CPU AT91SAM9260 /* Define this to the CPU frequency */ #define CPU_FREQ 198656000 #define MCK_FREQ 99328000 #define SLOW_CLOCK 32768 /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 #define BOOTFILE_EXT "lyre_proto1" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" /* Define this if a programmable hotkey is mapped */ //#define HAVE_HOTKEY