/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2008 by Maurus Cuelenaere * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ /* * This config file is for the Onda VX747 */ #define CONFIG_SDRAM_START 0x80004000 #define ONDA_VX767 1 #define MODEL_NAME "Onda VX767" /* For Rolo and boot loader */ #define MODEL_NUMBER 64 //#define HAVE_ATA_SD //#define HAVE_HOTSWAP //#define CONFIG_STORAGE (STORAGE_NAND | STORAGE_SD) #define CONFIG_STORAGE STORAGE_SD /* Multivolume currently handled at firmware/target/ level */ #define CONFIG_NAND NAND_CC #define HAVE_MULTIDRIVE #define NUM_DRIVES 2 /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* define this if the target has volume keys which can be used in the lists */ #define HAVE_VOLUME_IN_LIST /* LCD type */ #define CONFIG_LCD LCD_ONDAVX767 /* LCD dimensions */ #define LCD_WIDTH 480 #define LCD_HEIGHT 272 /* sqrt(480^2 + 272^2) / 4.3 = 128.3 */ #define LCD_DPI 128 #define LCD_DPI 128 #define LCD_DEPTH 16 /* 16bit colours */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ /* Define this if your LCD can be enabled/disabled */ //#define HAVE_LCD_ENABLE #define CONFIG_KEYPAD ONDAVX767_PAD /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_JZ4740 /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 0 /* TODO */ #define MAX_BRIGHTNESS_SETTING 127 #define DEFAULT_BRIGHTNESS_SETTING 85 #define DEFAULT_DIMNESS_SETTING 22 /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x100000 /* Define this if you have the Jz4740 internal codec */ #define HAVE_JZ4740_CODEC /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO) /* Tuner config */ #define CONFIG_TUNER TEA5767 #define CONFIG_TUNER_XTAL 32768 /* Define this if you have a speaker */ //#define HAVE_SPEAKER #define CONFIG_I2C I2C_JZ47XX /* TLV320 has no tone controls, so we use the software ones */ //#define HAVE_SW_TONE_CONTROLS /*#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | \ SAMPR_CAP_11)*/ #define BATTERY_CAPACITY_DEFAULT 1250 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 500 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 2500 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 100 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* Hardware controlled charging with monitoring */ //#define CONFIG_CHARGING CHARGING_MONITOR /* Define this if you have a Ingenic JZ4740 */ #define CONFIG_CPU JZ4732 /* define this if the hardware can be powered off while charging */ #define HAVE_POWEROFF_WHILE_CHARGING /* Define this to the CPU frequency */ #define CPU_FREQ 336000000 /* CPU clock: 336 MHz */ #define CFG_EXTAL 12000000 /* EXT clock: 12 Mhz */ /* define this if you have a flash memory storage */ #define HAVE_FLASH_STORAGE /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ #define BOOTFILE_EXT "vx767" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define CONFIG_USBOTG USBOTG_JZ4740 #define HAVE_USBSTACK #define USB_VENDOR_ID 0x07C4 #define USB_PRODUCT_ID 0xA4A5 /* Define this if a programmable hotkey is mapped */ //#define HAVE_HOTKEY