/*
 * This config file is for the Samsung YH-820
 */

#define TARGET_TREE /* this target is using the target tree system */

/* For Rolo and boot loader */
#define MODEL_NUMBER 57
#define MODEL_NAME   "Samsung YH-820"

/* define this if you have recording possibility */
/* todo #define HAVE_RECORDING */

/* Define bitmask of input sources - recordable bitmask can be defined
   explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN )

/* define the bitmask of hardware sample rates */
#define HW_SAMPR_CAPS   (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
                         SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
                         SAMPR_CAP_11 | SAMPR_CAP_8)

/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS  (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
                         SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
                         SAMPR_CAP_11 | SAMPR_CAP_8)

/* Type of LCD */
#define CONFIG_LCD LCD_S6B33B2

/* LCD dimensions */
#define LCD_WIDTH  128
#define LCD_HEIGHT 96
#define LCD_DEPTH  16   /* 65536 colours */
#define LCD_PIXELFORMAT RGB565

#ifndef BOOTLOADER

/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_E8564
/* TODO ??? */
//#define HAVE_RTC_ALARM

/* Define this if your LCD can be enabled/disabled */
#define HAVE_LCD_ENABLE

/* Define this if your LCD can be put to sleep.
   HAVE_LCD_ENABLE should be defined as well. */
/* todo #define HAVE_LCD_SLEEP*/
/* todo #define HAVE_LCD_SLEEP_SETTING */
#endif /* !BOOTLOADER */

/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT

/* Define this if your LCD can set contrast */
#define HAVE_LCD_CONTRAST

#define MIN_CONTRAST_SETTING        0
#define MAX_CONTRAST_SETTING        255
#define DEFAULT_CONTRAST_SETTING    137

/* define this if you can flip your LCD */
/* #define HAVE_LCD_FLIP */

/* define this if you can invert the colours on your LCD */
/* todo #define HAVE_LCD_INVERT */

/* put the lcd frame buffer in IRAM */
/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR */

/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP

/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR

/* define this if you want album art for this target */
#define HAVE_ALBUMART

/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING

/* define this to enable JPEG decoding */
#define HAVE_JPEG

/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN

/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN

/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE

#define CONFIG_KEYPAD SAMSUNG_YH_PAD

/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC

/* define this if you have a disk storage, i.e. something
   that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE

/* define this if you use an ATA controller */
#define CONFIG_STORAGE STORAGE_ATA

/*define this if the ATA controller and method of USB access support LBA48 */
#define HAVE_LBA48

/* We're able to shut off power to the HDD */
/* todo #define HAVE_ATA_POWER_OFF */

/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF

/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000

/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000

/* Define this if you have the AK4537 audio codec */
#define HAVE_AK4537

/* AK4537 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS

#define AB_REPEAT_ENABLE

#define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 1500  /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50   /* capacity increment */
#define BATTERY_TYPES_COUNT  1    /* only one type */

/* Hardware controlled charging */
#define CONFIG_CHARGING CHARGING_SIMPLE

/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER

/* Define this if you have a PortalPlayer PP5020 */
#define CONFIG_CPU PP5020

/* Define this if you want to use the PP5020 i2c interface */
#define CONFIG_I2C I2C_PP5020

/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING

/* The start address index for ROM builds */
#define ROM_START 0x00000000

/* The size of the flash ROM */
#define FLASH_SIZE 0x100000

/* Define this to the CPU frequency */
#define CPU_FREQ      75000000

/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ARC

/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USE_ROCKBOX_USB
/* todo - check */
#define USB_VENDOR_ID   0x04e8
#define USB_PRODUCT_ID  0x5023

/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ

#define MI4_FORMAT
#define BOOTFILE_EXT    "mi4"
#define BOOTFILE        "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"

/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC    0x00

/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA   0x00

#define ICODE_ATTR_TREMOR_NOT_MDCT


/* DMA is used only for reading on PP502x because although reads are ~8x faster
 * writes appear to be ~25% slower.
 */
#define HAVE_ATA_DMA

/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY