/* * This config file is for the Samsung YH-920 */ /* For Rolo and boot loader */ #define MODEL_NUMBER 58 #define MODEL_NAME "Samsung YH-920" /* define this if you have recording possibility */ #define HAVE_RECORDING /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO) /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \ SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \ SAMPR_CAP_11 | SAMPR_CAP_8) /* define the bitmask of recording sample rates */ #define REC_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \ SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \ SAMPR_CAP_11 | SAMPR_CAP_8) /* Type of LCD */ #define CONFIG_LCD LCD_S1D15E06 /* LCD dimensions */ #define LCD_WIDTH 160 #define LCD_HEIGHT 128 /* sqrt(160^2 + 128^2) / 1.8 = 113.8 */ #define LCD_DPI 114 #define LCD_DEPTH 2 #define LCD_PIXELFORMAT VERTICAL_PACKING /* Display colours, for screenshots and sim (0xRRGGBB) */ #define LCD_DARKCOLOR 0x000000 #define LCD_BRIGHTCOLOR 0x5a915a #define LCD_BL_DARKCOLOR 0x000000 #define LCD_BL_BRIGHTCOLOR 0xadd8e6 /* todo */ /* #ifndef BOOTLOADER */ #if 0 /* Define this if your LCD can be enabled/disabled */ #define HAVE_LCD_ENABLE /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE * should be defined as well. * We can currently put the lcd to sleep but it won't wake up properly */ #define HAVE_LCD_SLEEP #define HAVE_LCD_SLEEP_SETTING #endif /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT /* Define this if your LCD can set contrast */ #define HAVE_LCD_CONTRAST #define MIN_CONTRAST_SETTING 50 #define MAX_CONTRAST_SETTING 70 #define DEFAULT_CONTRAST_SETTING 61 /* Match boot contrast */ /* define this if you can flip your LCD */ #define HAVE_LCD_FLIP /* define this if you can invert the colours on your LCD */ #define HAVE_LCD_INVERT /* put the lcd frame buffer in IRAM */ /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR */ /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE #define CONFIG_KEYPAD SAMSUNG_YH92X_PAD /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* define this if you have a real-time clock */ #ifndef BOOTLOADER #define CONFIG_RTC RTC_E8564 /* TODO ??? */ //#define HAVE_RTC_ALARM #endif /* define this if you have a disk storage, i.e. something that needs spinups and can cause skips when shaked */ #define HAVE_DISK_STORAGE /* define this if you use an ATA controller */ #define CONFIG_STORAGE STORAGE_ATA /*define this if the ATA controller and method of USB access support LBA48 */ #define HAVE_LBA48 /* We're able to shut off power to the HDD */ #define HAVE_ATA_POWER_OFF /* Software controlled LED */ #define CONFIG_LED LED_REAL /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 /* Define this if you have the AK4537 audio codec */ #define HAVE_AK4537 /* AK4537 has no tone controls, so we use the software ones */ #define HAVE_SW_TONE_CONTROLS /* FM Tuner */ #define CONFIG_TUNER TEA5767 #define CONFIG_TUNER_XTAL 32768 /* Define this if the tuner uses 3-wire bus instead of classic i2c */ #define CONFIG_TUNER_3WIRE #define AB_REPEAT_ENABLE #define BATTERY_CAPACITY_DEFAULT 900 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 900 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 50 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* Hardware controlled charging */ #define CONFIG_CHARGING CHARGING_SIMPLE /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* Define this if you have a PortalPlayer PP5020 */ #define CONFIG_CPU PP5020 /* Define this if you want to use the PP5020 i2c interface */ #define CONFIG_I2C I2C_PP5020 /* define this if the hardware can be powered off while charging */ #define HAVE_POWEROFF_WHILE_CHARGING /* The start address index for ROM builds */ #define ROM_START 0x00000000 /* The size of the flash ROM */ #define FLASH_SIZE 0x100000 /* Define this to the CPU frequency */ #define CPU_FREQ 75000000 /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_ARC /* enable these for the experimental usb stack */ #define HAVE_USBSTACK #define USB_VENDOR_ID 0x04e8 #define USB_PRODUCT_ID 0x5022 #define HAVE_USB_HID_MOUSE /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ #define MI4_FORMAT #define BOOTFILE_EXT "mi4" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0x00 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 0x00 #define ICODE_ATTR_TREMOR_NOT_MDCT /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ #ifndef BOOTLOADER #define HAVE_ATA_DMA #endif /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY