/* * This config file is for Samsung YP-S3 */ /* For Rolo and boot loader */ #define MODEL_NUMBER 53 #define MODEL_NAME "Samsumg YP-S3" /* define this if you have recording possibility */ //#define HAVE_RECORDING /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO) /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) /* define the bitmask of recording sample rates */ #define REC_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you can flip your LCD */ //#define HAVE_LCD_FLIP /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you can invert the colours on your LCD */ //#define HAVE_LCD_INVERT /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* define this if you have a flash memory storage */ #define HAVE_FLASH_STORAGE #define CONFIG_STORAGE STORAGE_NAND #define CONFIG_NAND NAND_SAMSUNG /* LCD dimensions */ #define LCD_WIDTH 176 #define LCD_HEIGHT 220 #define LCD_DEPTH 16 /* pseudo 262.144 colors */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ /* Define this if your LCD can be enabled/disabled */ //#define HAVE_LCD_ENABLE /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE should be defined as well. */ //#define HAVE_LCD_SLEEP /* We have button lights */ #define HAVE_BUTTON_LIGHT #define CONFIG_KEYPAD MEIZU_M3_PAD /* We have headphone detection */ #define HAVE_HEADPHONE_DETECTION //#define AB_REPEAT_ENABLE //#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_S35390A /* Define the type of audio codec */ //#define HAVE_WM.... /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 /* FM Tuner */ #define CONFIG_TUNER SI4700 #define CONFIG_TUNER_XTAL 32768 /* assume no tone controls, so we use the software ones */ #define HAVE_SW_TONE_CONTROLS #define BATTERY_CAPACITY_DEFAULT 580 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 580 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 580 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 0 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* Hardware controlled charging, software can monitor plug and charge state */ #define CONFIG_CHARGING CHARGING_MONITOR /* Define this if your LCD can set contrast */ //#define HAVE_LCD_CONTRAST /* We have a Samsung S5L8700 */ #define CONFIG_CPU S5L8700 /* We use the S5L8700 i2c interface */ #define CONFIG_I2C I2C_S5L8700 /* define this if the hardware can be powered off while charging */ //#define HAVE_POWEROFF_WHILE_CHARGING /* The size of the flash ROM */ #define FLASH_SIZE 0x400000 /* Define this to the CPU frequency */ #define CPU_FREQ 200000000 /* Define this if you have ATA power-off control */ //#define HAVE_ATA_POWER_OFF /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 /* USB */ //#define HAVE_USBSTACK #define USE_ROCKBOX_USB #define USB_VENDOR_ID 0x04E8 #define USB_PRODUCT_ID 0x5090 /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ #define BOOTFILE_EXT "yps3" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" //#define BOOTLOADER_ENTRYPOINT 0x001F0000 //#define FLASH_ENTRYPOINT 0x00001000 //#define FLASH_MAGIC 0xfbfbfbf1 /* Define this for FM radio input available */ #define HAVE_FMRADIO_IN /** Port-specific settings **/ /* Main LCD contrast range and defaults */ #define MIN_CONTRAST_SETTING 1 #define MAX_CONTRAST_SETTING 30 #define DEFAULT_CONTRAST_SETTING 19 /* Match boot contrast */ /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 0 #define MAX_BRIGHTNESS_SETTING 15 #define DEFAULT_BRIGHTNESS_SETTING 10 /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY