/* * This config file is for the Sansa M200 series */ /* For Rolo and boot loader */ #define MODEL_NUMBER 29 #define MODEL_NAME "Sandisk Sansa m200 series" /* Enable FAT16 support */ #define HAVE_FAT16SUPPORT /* define this if you have recording possibility */ //#define HAVE_RECORDING /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ //#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF) /* define this if you can flip your LCD */ #define HAVE_LCD_FLIP /* define this if you can invert the colours on your LCD */ #define HAVE_LCD_INVERT /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* define this if you have a flash memory storage */ #define HAVE_FLASH_STORAGE #define CONFIG_STORAGE STORAGE_NAND #define CONFIG_NAND NAND_TCC /* LCD dimensions */ #define LCD_WIDTH 128 #define LCD_HEIGHT 64 /* sqrt(128^2 + 64^2) / 1.8 = 79.5 */ #define LCD_DPI 80 #define LCD_DEPTH 1 #define LCD_PIXELFORMAT VERTICAL_PACKING /* Display colours, for screenshots and sim (0xRRGGBB) */ #define LCD_BARKCOLOR 0x000000 #define LCD_BRIGHTCOLOR 0x5e6854 #define LCD_BL_DARKCOLOR 0x000000 #define LCD_BL_BRIGHTCOLOR 0x3ca0e6 /* define this to indicate your device's keypad */ #define CONFIG_KEYPAD SANSA_M200_PAD /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_TCC77X /* define this if you have RTC RAM available for settings */ //#define HAVE_RTC_RAM /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x38000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x10000 #define AB_REPEAT_ENABLE /* Define this if you have the TLV320 audio codec */ #define HAVE_TLV320 /* TLV320 has no tone controls, so we use the software ones */ #define HAVE_SW_TONE_CONTROLS /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define CONFIG_I2C I2C_TCC77X #define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 50 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* define this if the unit should not shut down on low battery. */ #define NO_LOW_BATTERY_SHUTDOWN /* Define this if you have a TCC770 */ #define CONFIG_CPU TCC770 /* Define this if you have ATA power-off control */ #define HAVE_ATA_POWER_OFF /* Define this to the CPU frequency */ #define CPU_FREQ 120000000 /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 #define CONFIG_LCD LCD_SSD1815 #define BOOTFILE_EXT "m200" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/" #define IBSS_ATTR_VOICE_STACK #define ICODE_ATTR_TREMOR_NOT_MDCT #define ICODE_ATTR_TREMOR_MDCT #define ICODE_ATTR_FLAC #define IBSS_ATTR_FLAC_DECODED0 #define ICONST_ATTR_MPA_HUFFMAN #define IBSS_ATTR_MPC_SAMPLE_BUF #define ICODE_ATTR_ALAC #define IBSS_ATTR_SHORTEN_DECODED0 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */ /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY