/* * This config file is for the Sony NWZ Linux based targets */ #ifndef SIMULATOR #define CONFIG_PLATFORM (PLATFORM_HOSTED) #define PIVOT_ROOT "/contents" #endif /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* Define this if the LCD can shut down */ #define HAVE_LCD_SHUTDOWN /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* define this if the target has volume keys which can be used in the lists */ #define HAVE_VOLUME_IN_LIST #define LCD_DEPTH 16 /* Check that but should not matter */ #define LCD_PIXELFORMAT RGB565 #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS /* Main LCD backlight brightness range and defaults: the backlight driver only * has levels from 0 to 5. But 0 is off so start at 1. The driver has configurable * periods for fade in/out but we can't easily export that to Rockbox */ #define MIN_BRIGHTNESS_SETTING 1 #define MAX_BRIGHTNESS_SETTING 5 #define DEFAULT_BRIGHTNESS_SETTING 4 /* Which backlight fading type? */ #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING /* define this if you have a real-time clock */ #define CONFIG_RTC 0 /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x80000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x100000 #define CONFIG_TUNER SI4700 /* There is no hardware tone control */ #define HAVE_SW_TONE_CONTROLS #define INPUT_SRC_CAPS SRC_CAP_FMRADIO /* The A15 and A25 support more sampling rates, in fact they support crazy high bit-rates such * as 176.4 and 192 kHz but Rockbox does not support those */ #if defined(SONY_NWZA10) || defined(SONY_NWA20) #define HW_SAMPR_CAPS (SAMPR_CAP_44 | SAMPR_CAP_48 | SAMPR_CAP_88 | SAMPR_CAP_96 | SAMPR_CAP_176 | SAMPR_CAP_192) #endif /* KeyPad configuration for plugins */ #define CONFIG_KEYPAD SONY_NWZ_PAD #define HAS_BUTTON_HOLD /** Non-simulator section **/ #ifndef SIMULATOR /* We have usb power and can detect usb but it is handled by Linux */ #define HAVE_USB_POWER #define USB_NONE /* Audio codec */ #define HAVE_NWZ_LINUX_CODEC #define HAVE_ALSA_32BIT #endif /* SIMULATOR */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* Linux controlls charging, we can monitor */ #define CONFIG_CHARGING CHARGING_MONITOR /* define this if the hardware can be powered off while charging */ #define HAVE_POWEROFF_WHILE_CHARGING /* same dimensions as gigabeats */ #define CONFIG_LCD LCD_NWZ_LINUX /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* Define this to the CPU frequency */ #define CPU_FREQ 532000000 #ifdef NWZ_HAS_SD /* External SD card can be mounted */ #define CONFIG_STORAGE (STORAGE_HOSTFS|STORAGE_SD) #define HAVE_MULTIDRIVE /* But _not_ CONFIG_STORAGE_MULTI */ #define NUM_DRIVES 2 #define HAVE_HOTSWAP #define MULTIDRIVE_DIR "/mnt/media" #define MULTIDRIVE_DEV "/sys/block/mmcblk1" #else /* No special storage */ #define CONFIG_STORAGE STORAGE_HOSTFS #endif #define HAVE_STORAGE_FLUSH /* Battery */ #define BATTERY_TYPES_COUNT 1 /* special define to be use in various places */ #define SONY_NWZ_LINUX /* Battery */ #define BATTERY_CAPACITY_DEFAULT 600 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 600 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 600 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 0 /* capacity increment */